Skip to content

Cambridge International · Cambridge IGCSE

Cambridge IGCSE Physics Specimen (for exams from 2023) Paper 3 Core (0625/03)

Set by Cambridge International for Cambridge IGCSE Physics, Specimen (for exams from 2023): 1 hour 15 minutes and 80 marks, on Motion, Forces, Energy, work and power, Thermal physics, Transfer of thermal energy, Waves and sound, Light and the electromagnetic spectrum, Electrical quantities, Electric circuits and electrical safety, Magnetism and electromagnetic effects, Nuclear physics, Space physics. The paper itself is on Cambridge International’s website; this page adds what it covers, how to use it and original practice questions on the same topics.

Paper facts

Series
Specimen (for exams from 2023)
Paper
Paper 3 Core
Code
0625/03
Tier
Core
Time
1 hour 15 minutes
Marks
80
Calculator
Allowed
Syllabus
0625 (2023–2025 syllabus)
Links checked
17 November 2026

Official files

These files belong to Cambridge International. Labverse links to them and never hosts or copies them. Labverse is not affiliated with Cambridge International.

What this paper covers

12 topic groups from our map of Cambridge IGCSE Physics (0625). Revise each one with its topic pages and simulations before you sit the paper.

How to use this paper

  1. 1. Time it. Set 1 hour 15 minutes for 80 marks: about 56 seconds a mark. At 38 minutes you should be roughly halfway through the marks; if you’re well behind, speed up on the short questions.
  2. 2. Sit it in one go. Open the question paper on Cambridge International’s website (the link above) and work on paper, with no notes.
  3. 3. Mark it with the official scheme. Give a mark only when your answer matches a marking point. Be strict with yourself: it’s the gaps you find that improve your grade.
  4. 4. Learn from the marks you lost. For every lost mark, note whether it was knowledge, method, reading the question or time.
  5. 5. Log mistakes by topic. Keep one line per topic group (Motion, Forces, Energy, work and power, Thermal physics, Transfer of thermal energy, Waves and sound, Light and the electromagnetic spectrum, Electrical quantities, Electric circuits and electrical safety, Magnetism and electromagnetic effects, Nuclear physics, Space physics) and add a tally each time a mark goes there.
  6. 6. Revisit, then redo. Work through the weakest group’s topic pages and simulations, try the questions below, and come back to the paper in a week.

Practise the same topics

6 original exam-style questions on this paper’s topics, written in the style of Cambridge IGCSE (not taken from the paper). Try each one before you reveal the answer.

  1. 1.A lift in a tall building starts from rest. It speeds up steadily to 4.0 m/s in 5.0 s, travels at 4.0 m/s for 15 s, then slows steadily to rest in 4.0 s.

    From the topic: Distance–time and speed–time graphs

    1. (a)Sketch the speed–time graph for the motion of the lift. Label the axes.

      3 marks
      Show the answer

      Answer: Axes labelled speed in m/s and time in s. A straight line from the origin up to 4.0 m/s at 5.0 s, a horizontal line at 4.0 m/s until 20 s, then a straight line down to zero at 24 s.

      Marking points

      • both axes labelled with quantity and unit
      • straight line rising from the origin to 4.0 m/s at 5.0 s, then horizontal until 20 s
      • straight line falling to zero speed at 24 s
    2. (b)Calculate the total distance travelled by the lift.

      3 marks
      Show the answer

      Answer: Area = (½ × 5.0 × 4.0) + (15 × 4.0) + (½ × 4.0 × 4.0) = 10 + 60 + 8 = 78 m

      Marking points

      • distance = area under the speed–time graph
      • correct areas: 10 m, 60 m and 8 m
      • 78 m
  2. 2.A uniform metre rule is supported by a knife-edge under its 50 cm mark. A 0.30 kg mass hangs from the 10 cm mark. The gravitational field strength g is 9.8 N/kg.

    From the topic: Moments and equilibrium

    1. (a)Work out the weight of the 0.30 kg mass.

      1 mark
      Show the answer

      Answer: W = mg = 0.30 × 9.8 = 2.94 N (2.9 N)

      Marking points

      • 2.94 N or 2.9 N
    2. (b)Calculate the moment of this weight about the knife-edge.

      2 marks
      Show the answer

      Answer: Distance from the knife-edge: 50 cm − 10 cm, which is 0.40 m. Moment = 2.94 × 0.40 = 1.18 N m (1.2 N m).

      Marking points

      • distance from the knife-edge = 0.40 m (40 cm)
      • 1.18 N m or 1.2 N m
    3. (c)A second mass is hung from the 80 cm mark and the rule balances. Calculate this mass.

      3 marks
      Show the answer

      Answer: Its weight × 0.30 = 1.176, so its weight = 3.92 N and its mass = 3.92 ÷ 9.8 = 0.40 kg. (Or 0.30 × 40 = m × 30, giving m = 0.40 kg.)

      Marking points

      • weight × 0.30 = 1.18 (clockwise moment = anticlockwise moment)
      • weight = 3.92 N (3.9 N)
      • mass = 0.40 kg
  3. 3.A car is travelling along a level road. The driver brakes and the car comes to rest.

    From the topic: Energy stores and transfers

    1. (a)Name the energy store of the car that decreases.

      1 mark
      Show the answer

      Answer: The kinetic store.

      Marking points

      • kinetic
    2. (b)Friction between the brake pads and the discs makes them hot. State how energy is transferred to the pads and discs, and name the store that increases.

      2 marks
      Show the answer

      Answer: By mechanical work done (by the friction forces). The internal (thermal) store of the pads and discs increases.

      Marking points

      • mechanical work done (by friction)
      • internal (thermal) store of the pads / discs
    3. (c)The car's kinetic store decreases by 180 kJ, and the pads and discs gain 172 kJ. Calculate how much energy goes elsewhere, and suggest where it goes.

      2 marks
      Show the answer

      Answer: 180 − 172 = 8 kJ. It warms the tyres, the road and the air (and a little leaves as sound).

      Marking points

      • 8 kJ
      • internal (thermal) store of tyres / road / air, or sound
  4. 4.A student leaves a shallow dish of water on a laboratory bench. Two days later the dish is empty, although the water never came close to 100 °C.

    From the topic: Melting, boiling and evaporation

    1. (a)Name the process by which the water left the dish.

      1 mark
      Show the answer

      Answer: Evaporation

      Marking points

      • evaporation
    2. (b)Describe this process in terms of particles.

      2 marks
      Show the answer

      Answer: The more energetic water particles near the surface have enough energy to overcome the attraction of the other particles, and they escape from the surface into the air.

      Marking points

      • the more energetic / fastest particles
      • escape from the surface (of the liquid) into the air
    3. (c)State the effect of evaporation on the temperature of the water that remains in the dish.

      1 mark
      Show the answer

      Answer: It lowers the temperature: the remaining water cools.

      Marking points

      • temperature decreases / the water cools
  5. 5.A student wraps a small piece of ice in wire gauze and lets it sink to the bottom of a boiling tube full of cold water. The student then heats the tube near the top with a Bunsen burner. Soon the water at the top boils, but most of the ice is still there.

    From the topic: Conduction

    1. (a)State what this experiment shows about water.

      1 mark
      Show the answer

      Answer: Water is a bad (poor) thermal conductor.

      Marking points

      • water is a bad (poor) thermal conductor
    2. (b)Explain why the tube is heated near the top and not at the bottom.

      2 marks
      Show the answer

      Answer: Hot water is less dense, so it stays at the top and no convection current forms. Heating at the bottom would set up convection currents that carry energy to the ice, so the test would no longer be about conduction only.

      Marking points

      • warm water is less dense so it stays at the top / no convection current forms
      • heating at the bottom would cause convection that carries energy to the ice (the test would not be about conduction alone)
    3. (c)State two safety precautions the student should take.

      2 marks
      Show the answer

      Answer: Wear eye protection, and hold the tube in a holder with its open end pointing away from everyone.

      Marking points

      • one precaution from: wear eye protection; hold the tube with a holder (tongs); point the open end away from people; heat gently; tie back long hair
      • a second, different precaution from the same list
  6. 6.A student in Nairobi lays a light copper rod across two horizontal copper rails. A strong magnet is arranged so that its field passes vertically through the rod. The rails are connected to a low-voltage d.c. supply through a switch.

    From the topic: Force on a current-carrying conductor

    1. (a)State what is seen when the switch is closed.

      1 mark
      Show the answer

      Answer: The rod rolls (moves) along the rails.

      Marking points

      • the rod moves / rolls along the rails (accept: a force acts on the rod)
    2. (b)Suggest why the switch should be closed for only a short time.

      1 mark
      Show the answer

      Answer: The rod and rails are almost a short circuit, so the current is large and they quickly become hot.

      Marking points

      • large current / almost a short circuit, so the rod (rails, supply) gets hot
    3. (c)The magnet is taken away and the switch is closed again. State what happens to the rod and explain why.

      2 marks
      Show the answer

      Answer: The rod does not move. A force needs both a current and a magnetic field, and now there is no field.

      Marking points

      • the rod stays still / does not move
      • the force needs a magnetic field as well as a current (there is no field now)
    4. (d)The magnet is put back. State one change the student could make so that the rod is pushed with a bigger force.

      1 mark
      Show the answer

      Answer: Use a larger current, or use a stronger magnet.

      Marking points

      • larger current / stronger magnet (stronger field)