Skip to content

Cambridge International · Cambridge IGCSE

Cambridge IGCSE Physics Specimen (for exams from 2023) Paper 4 Extended (0625/04)

Set by Cambridge International for Cambridge IGCSE Physics, Specimen (for exams from 2023): 1 hour 15 minutes and 80 marks, on Motion, Forces, Energy, work and power, Thermal physics, Transfer of thermal energy, Waves and sound, Light and the electromagnetic spectrum, Electrical quantities, Electric circuits and electrical safety, Magnetism and electromagnetic effects, Nuclear physics, Space physics. The paper itself is on Cambridge International’s website; this page adds what it covers, how to use it and original practice questions on the same topics.

Paper facts

Series
Specimen (for exams from 2023)
Paper
Paper 4 Extended
Code
0625/04
Tier
Extended
Time
1 hour 15 minutes
Marks
80
Calculator
Allowed
Syllabus
0625 (2023–2025 syllabus)
Links checked
17 November 2026

Official files

These files belong to Cambridge International. Labverse links to them and never hosts or copies them. Labverse is not affiliated with Cambridge International.

What this paper covers

12 topic groups from our map of Cambridge IGCSE Physics (0625). Revise each one with its topic pages and simulations before you sit the paper.

How to use this paper

  1. 1. Time it. Set 1 hour 15 minutes for 80 marks: about 56 seconds a mark. At 38 minutes you should be roughly halfway through the marks; if you’re well behind, speed up on the short questions.
  2. 2. Sit it in one go. Open the question paper on Cambridge International’s website (the link above) and work on paper, with no notes.
  3. 3. Mark it with the official scheme. Give a mark only when your answer matches a marking point. Be strict with yourself: it’s the gaps you find that improve your grade.
  4. 4. Learn from the marks you lost. For every lost mark, note whether it was knowledge, method, reading the question or time.
  5. 5. Log mistakes by topic. Keep one line per topic group (Motion, Forces, Energy, work and power, Thermal physics, Transfer of thermal energy, Waves and sound, Light and the electromagnetic spectrum, Electrical quantities, Electric circuits and electrical safety, Magnetism and electromagnetic effects, Nuclear physics, Space physics) and add a tally each time a mark goes there.
  6. 6. Revisit, then redo. Work through the weakest group’s topic pages and simulations, try the questions below, and come back to the paper in a week.

Practise the same topics

8 original exam-style questions on this paper’s topics, written in the style of Cambridge IGCSE (not taken from the paper). Try each one before you reveal the answer.

  1. 1.A student lets go of a small steel ball just at the oil level in a tall measuring cylinder. Two marks on the cylinder are 30.0 cm apart, and the upper mark is well below the oil level.

    From the topic: Free fall and terminal velocity

    1. (a)(Supplement) After a short distance the ball moves at a constant speed. State the name of this constant speed.

      1 mark
      Show the answer

      Answer: Terminal velocity

      Marking points

      • terminal velocity
    2. (b)(Supplement) The ball takes 4.0 s to travel from the upper mark to the lower mark. Calculate its terminal velocity in m/s.

      2 marks
      Show the answer

      Answer: v = s ÷ t = 0.300 ÷ 4.0 = 0.075 m/s

      Marking points

      • v = s/t or 0.300 ÷ 4.0 (30.0 cm = 0.300 m)
      • 0.075 m/s
    3. (c)(Supplement) Suggest why the upper mark is placed well below the surface of the oil.

      1 mark
      Show the answer

      Answer: So that the ball has already reached terminal velocity before timing starts.

      Marking points

      • ball has reached terminal velocity / constant speed before the upper mark
    4. (d)(Supplement) Explain why the same ball would reach a much greater terminal velocity if it fell through air.

      2 marks
      Show the answer

      Answer: At any given speed the oil resists the ball far more than air does, so in oil the forces balance at a much lower speed. In air the speed must rise much higher before the resistance is large enough.

      Marking points

      • resistance (drag) of oil is much greater than air resistance at the same speed
      • so forces balance / resultant force becomes zero at a lower speed in oil
  2. 2.A 4.0 × 10⁵ kg passenger train approaches a station at 30 m/s. Braking reduces its speed uniformly to 12 m/s over a time of 45 s.

    From the topic: Force, mass and acceleration Supplement

    1. (a)(Supplement) Calculate the train’s acceleration while it brakes.

      3 marks
      Show the answer

      Answer: Δv = 12 − 30 = −18 m/s; a = Δv ÷ Δt = −18 ÷ 45 = −0.40 m/s²

      Marking points

      • Δv = −18 m/s
      • a = Δv/Δt or −18 ÷ 45
      • −0.40 m/s² (or deceleration of 0.40 m/s²)
    2. (b)(Supplement) Find the magnitude of the resultant force acting on the train.

      2 marks
      Show the answer

      Answer: F = ma = 4.0 × 10⁵ × 0.40 = 1.6 × 10⁵ N

      Marking points

      • F = ma or 4.0 × 10⁵ × 0.40
      • 1.6 × 10⁵ N (160 000 N)
    3. (c)(Supplement) State the direction of this resultant force.

      1 mark
      Show the answer

      Answer: Backwards, opposite to the direction the train is moving.

      Marking points

      • opposite to the motion / backwards / same direction as the acceleration
  3. 3.Take g as 9.8 N/kg. An electric motor lifts a load of mass 12 kg through a height of 2.5 m, and is supplied with 400 J of electrical energy during the lift.

    From the topic: Efficiency

    1. (a)(Supplement) Calculate the gain in gravitational potential energy of the load.

      2 marks
      Show the answer

      Answer: ΔEp = mgΔh = 12 × 9.8 × 2.5 = 294 J

      Marking points

      • 12 × 9.8 × 2.5 seen
      • 294 J
    2. (b)(Supplement) Calculate the efficiency of the motor.

      2 marks
      Show the answer

      Answer: 294 ÷ 400 = 0.735, so the efficiency is 73.5%

      Marking points

      • 294 ÷ 400 seen
      • 73.5% (0.735)
    3. (c)(Supplement) Calculate the energy wasted, and state one way in which it is wasted.

      2 marks
      Show the answer

      Answer: 400 − 294 = 106 J. It heats the motor and its wires (or leaves as sound).

      Marking points

      • 106 J
      • heating of the motor / wires / surroundings, or sound
  4. 4.A cottage in Wales is heated by an open coal fire in a fireplace with a chimney.

    From the topic: Consequences of thermal energy transfer

    1. (a)(Supplement) A person sitting in front of the fire feels warm on the side facing the fire but not on their back. Explain why.

      2 marks
      Show the answer

      Answer: Most of the energy reaches the person by infrared radiation from the glowing coal and flames. The radiation travels outwards from the fire, so it is absorbed only by the side of the body that faces the fire.

      Marking points

      • energy reaches the person mainly by (infrared) radiation
      • radiation from the fire falls only on (is absorbed only by) the side facing it
    2. (b)(Supplement) Explain why air from the room is drawn into the fireplace.

      2 marks
      Show the answer

      Answer: The hot gases above the fire are less dense, so they rise up the chimney. Cooler, denser air from the room flows in at the bottom to replace them.

      Marking points

      • hot gases are less dense and rise up the chimney
      • cooler (denser) air flows in to replace them
    3. (c)(Supplement) Suggest why an open fire is a wasteful way to heat a room.

      1 mark
      Show the answer

      Answer: Much of the energy is carried up the chimney by the rising hot gases.

      Marking points

      • much energy is carried up the chimney (by convection)
    4. (d)(Supplement) The metal grate that holds the coal becomes very hot. Name the process that transfers energy into the grate where it touches the burning coal.

      1 mark
      Show the answer

      Answer: Conduction

      Marking points

      • conduction
  5. 5.A rubbed acetate rod is positively charged. It is balanced in a paper stirrup, hung on a thread, and is free to rotate. Rods X and Y are brought near one end in turn, without touching it. X repels the hanging rod. Y attracts it.

    From the topic: Electric charge

    1. (a)State the sign of the charge on X. Explain your answer.

      2 marks
      Show the answer

      Answer: Positive, because charges of the same sign repel each other.

      Marking points

      • positive
      • like (same-sign) charges repel
    2. (b)A student concludes that Y must be negatively charged. Explain why this conclusion may be wrong.

      2 marks
      Show the answer

      Answer: Y could be uncharged. A charged object attracts uncharged objects as well as oppositely charged ones, so attraction alone does not prove the sign.

      Marking points

      • Y could be uncharged
      • uncharged objects are also attracted / only repulsion proves the sign
    3. (c)Describe a simple experiment, other than using a hanging rod, to show that a rubbed rod is charged.

      2 marks
      Show the answer

      Answer: Hold the rod just above some tiny pieces of paper. If the pieces jump up to the rod, it is charged.

      Marking points

      • hold the rod close to small pieces of paper (or a thin stream of water)
      • the paper is attracted / jumps to the rod (the water bends towards it)
  6. 6.(Supplement) A horizontal wire runs into the page, in a magnetic field. The N pole is on the left of the wire and the S pole on its right. The wire is part of a complete circuit and is moved straight downwards through the field.

    From the topic: Electromagnetic induction

    1. (a)State which way the field pushes on the induced current in the wire.

      1 mark
      Show the answer

      Answer: Upwards, opposing the downward motion.

      Marking points

      • upwards / opposite to the motion
    2. (b)Determine the direction of the induced current in the wire.

      1 mark
      Show the answer

      Answer: Out of the page, towards the reader. By Fleming's right-hand rule: thumb down for the motion and first finger to the right for the field, so the second finger points out of the page.

      Marking points

      • out of the page (towards the reader)
    3. (c)The wire is then moved upwards at the same speed. State how the induced current changes.

      1 mark
      Show the answer

      Answer: It reverses, flowing into the page, with the same size.

      Marking points

      • reverses / now into the page
    4. (d)State how the directions of the motion, the field and the induced current are related.

      1 mark
      Show the answer

      Answer: Any two of them are perpendicular to each other.

      Marking points

      • mutually perpendicular (each at 90° to the others)
  7. 7.A nucleus of strontium-90 contains 38 protons and 52 neutrons. It decays by β-emission to form a nucleus of yttrium (Y).

    From the topic: Radioactive decay and decay equations

    1. (a)(Supplement) Describe what happens inside the nucleus during β-emission.

      2 marks
      Show the answer

      Answer: A neutron changes into a proton and an electron. The electron leaves the nucleus at high speed as the β-particle.

      Marking points

      • a neutron changes into a proton and an electron
      • the electron is emitted (as the β-particle)
    2. (b)(Supplement) State the number of protons and the number of neutrons in the yttrium nucleus.

      2 marks
      Show the answer

      Answer: 39 protons and 51 neutrons.

      Marking points

      • 39 protons
      • 51 neutrons
    3. (c)(Supplement) Write the decay equation in nuclide notation.

      2 marks
      Show the answer

      Answer: ⁹⁰₃₈Sr → ⁹⁰₃₉Y + ⁰₋₁e

      Marking points

      • ⁰₋₁e (or ⁰₋₁β) for the β-particle
      • ⁹⁰₃₉Y, with the equation balanced
    4. (d)(Supplement) Strontium-90 is unstable because it has too many neutrons. Explain how β-emission makes the nucleus more stable.

      2 marks
      Show the answer

      Answer: The nucleus ends up with one neutron fewer and one proton more, so the number of excess neutrons goes down.

      Marking points

      • one fewer neutron and one more proton
      • so there are fewer excess neutrons
  8. 8.A navigation satellite travels round the Earth at an average orbital speed of 3.9 km/s. The radius of its orbit is 2.7 × 10⁷ m.

    From the topic: Orbital speed Supplement

    1. (a)(Supplement) Calculate the orbital period of the satellite in hours.

      3 marks
      Show the answer

      Answer: T = 2πr/v = 2π × 2.7 × 10⁷ ÷ 3900 = 4.35 × 10⁴ s. In hours: 43 500 ÷ 3600 = 12 h.

      Marking points

      • T = 2πr/v (equation rearranged), with v in m/s
      • 4.35 × 10⁴ s
      • 12 h
    2. (b)(Supplement) State how many orbits the satellite completes in one day.

      1 mark
      Show the answer

      Answer: About 2 orbits, because 24 ÷ 12 = 2.

      Marking points

      • 2

Paper 4 Extended in other series