What this topic covers
A swimmer beyond the breakers at a beach in Durban rises and sinks as each swell passes, yet stays roughly where they were while the swell rolls on to the sand. Topic 3.1 explains why.
Energy travels, the material stays (Core)
- A rope. Jerk one end up and down once. A hump runs along it, but each part of the rope just lifts and drops back.
- A spring. Push one end of a long slinky forwards and back. A squashed region races along, while a coil wearing a paper tag shuffles and settles where it began.
- Water. Tap still water. Ripples spread out, and a floating leaf bobs as they pass instead of drifting off with them.
The energy crosses the whole medium; each part of it only vibrates about a fixed position.
The features of a wave (Core)
| Feature | Meaning | Unit |
|---|---|---|
| Crest (peak) | A highest point, furthest above the rest position | – |
| Trough | A lowest point, furthest below the rest position | – |
| Amplitude | The largest displacement from the rest position | m, cm |
| Wavelength, λ | Distance from a crest to the neighbouring crest: one complete wave | m, cm |
| Frequency, f | How many whole waves pass a point every second | Hz, kHz |
| Wave speed, v | How far a crest moves in one second | m/s |
One hertz means one wave per second.
Wavefronts. Seen from above, a dropped pebble makes circular ripples and a dipping straight bar makes straight ones. A line joining points at the same stage of their vibration, such as all along one crest, is a wavefront. Neighbouring wavefronts are one wavelength apart, and the wave moves at right angles to them.
The wave equation (Core)
- : wave speed, in m/s
- : frequency, in Hz
- : wavelength, in m
You must remember this equation. Each second the source sends out waves, each long, so the leading crest moves metres. Change cm to m (divide by 100) and kHz to Hz (multiply by 1000) first. On one stretched rope the speed stays fixed, so doubling the frequency halves the wavelength.
Worked example 1: waves at a jetty (Core)
A fisher on a jetty in Zanzibar counts 15 waves passing a post in 60 s. The crests are 18 m apart. Find the frequency and the wave speed.
Answer: 0.25 Hz and 4.5 m/s.
Worked example 2: ripples in centimetres (Core)
Ripples of frequency 12 Hz have wavefronts 1.5 cm apart. Find their speed, then their wavelength at 9.0 Hz and the same speed.
Answer: 0.18 m/s, then 2.0 cm: lower frequency, longer waves.
What waves can do (Core)
You also need to describe reflection from a flat surface, refraction (a change of speed, which turns waves arriving at an angle, as when ripples reach shallower water) and diffraction (spreading out through a narrow gap). A ripple tank shows all three; they have their own topic. The simulation here shows none of them: its single, endlessly long chain has no barrier, boundary or gap.
Simulation tasks
In the simulation above, a Transverse wave starts at Frequency 1.0 Hz and Wave speed 2.0 m/s, so the Wavelength card reads 2.00 m. Track and the crest and trough labels are already on.
- (Core) Press Play. Crests sweep along, but the tracked particle only moves up and down.
- (Core) If markers A and B are not showing, press Ruler. Pause, then drag them onto neighbouring crests: Ruler, A to B should read close to 2.00 m.
- (Core) Predict the wavelength at 2.0 Hz, then set Frequency to 2.0 Hz. The card shows 1.00 m, and shorter waves follow the longer ones out.
- (Core) Set Wave speed to 4.0 m/s. The wave restarts with m.
- Helpful extra: the Period card is the time for one wave, . The syllabus does not list the period of a wave, but it helps with the displacement–time graph.