What this topic covers
After an earthquake, the first tremors to reach a distant seismometer are P-waves (primary); S-waves (secondary) come later. The rock vibrates differently in each. Topic 3.1 sorts waves into two types by comparing the direction of vibration with the direction of travel, also called the direction of propagation.
Transverse waves (Core)
Stretch a rope and move one end up and down. The wave runs along the rope, but each piece of it only moves up and down, at 90° to the wave's path. A transverse wave has crests and troughs. Cambridge examples:
- electromagnetic radiation, such as light, radio waves and X-rays, which can cross empty space;
- water waves, modelled as transverse, although a real water surface moves round in small loops;
- seismic S-waves, which shake rock across their path.
Longitudinal waves (Core)
Stretch a slinky along a bench and push and pull one end along its length. The coils move backwards and forwards on the same line the wave follows: the vibration is parallel to the direction of travel. Cambridge examples:
- sound, through air and also through liquids and solids;
- seismic P-waves, which squeeze and stretch rock along their path.
| Feature | Transverse | Longitudinal |
|---|---|---|
| Vibration | Across the direction of travel | Along the direction of travel |
| Lab model | Rope, or slinky shaken sideways | Slinky pushed and pulled lengthways |
| Pattern | Crests and troughs | Compressions and rarefactions (Supplement) |
One slinky can carry either type; how you move its end decides which.
Energy moves, matter does not (Core)
Neither type carries its medium along. A paper tag on one coil of a slinky jiggles about one spot. The air beside a singer's lips never reaches the back of the hall, yet the song is heard there: energy made the trip, not air.
Compressions and rarefactions (Supplement)
- A compression is a region where the particles are closer together than usual. In sound, the pressure there is slightly higher.
- A rarefaction is a region where they are further apart than usual, with slightly lower pressure.
A loudspeaker cone pushing forwards crowds the nearby air into a compression; pulling back, it leaves a rarefaction. The pattern travels outwards while the air only vibrates. The centres of neighbouring compressions are one wavelength apart, so a compression to the next rarefaction is half a wavelength.
Worked example 1: a rope tied to a tree (Core)
One end of a rope is tied to a tree. A student holding the other end moves it 0.40 m from its lowest to its highest point. Name the wave type and find the amplitude.
The rope moves up and down while the wave travels horizontally, so the wave is transverse. The rest position is halfway:
No part of the rope travels to the tree; only energy does.
Worked example 2: counting compressions (Supplement)
One end of a slinky is pushed and pulled 3.0 times per second. A photo shows five compressions, with 2.4 m between the centres of the first and the fifth. Find the wavelength and the wave speed.
Five compressions have four gaps between them:
Answer: 0.60 m and 1.8 m/s. Dividing by 5 would wrongly give 0.48 m.
Simulation tasks
In the simulation above, Transverse is chosen under Type of wave, and the Wavelength card shows 2.00 m. Track is already on.
- (Core) Press Play. The diamond marker rides a crest along the chain, yet the highlighted particle stays above the same mark on the ruler.
- (Core) Choose Longitudinal. That particle now slides back and forth along the chain, about the same rest position.
- (Supplement) Crowded regions are already shaded and labelled C, spread-out ones R. Use the Ruler markers (press Ruler only if A and B are hidden) to span neighbouring C labels: about 2.00 m.
- (Supplement) On the Displacement–distance graph (a snapshot), each C sits where the line crosses zero going down, not at a peak.