Skip to content

Cambridge IGCSE Physics (0625) · Thermal physics

Kinetic particle model of matter

2.1.12.1.2

Core: how solids, liquids and gases differ; the names of the changes of state; how particles are spaced, laid out and moving in each state; faster motion at higher temperature, down to absolute zero (−273 °C). Supplement: forces, distances and motion explain the properties.

Loading simulation…

Symbols match your course. Open the full particle model and states of matter simulation for more presets and teacher tools.

What this topic covers

A steel spoon, the tea in a cup and the air in a Nairobi café are all made of tiny particles that never stop moving. How those particles are packed, laid out and moving makes each one a solid, a liquid or a gas (syllabus 2.1.1 and 2.1.2).

Telling the states apart (Core)

PropertySolidLiquidGas
ShapeIts ownTakes the container's shapeFills the whole container
VolumeFixedFixedNot fixed
Flows?NoYesYes
Easy to squash?NoNoYes

Naming the changes of state (Core)

Melting turns a solid into a liquid; freezing, or solidification, is the reverse. A liquid becomes a gas by boiling or evaporation, and a gas returns to a liquid by condensation. Changes straight between solid and gas are not needed for 0625.

Inside each state (Core)

FeatureSolidLiquidGas
LayoutRegular patternIrregularIrregular
SpacingTouching, tightly packedClose, mostly touchingFar apart
MotionVibrate about fixed positionsMove around, sliding past one anotherFast and random, in straight lines between collisions

Particle diagrams. Solid: equal circles in tidy rows, all touching. Liquid: most circles in contact but scattered unevenly. Gas: a few circles spread well apart, with arrows pointing different ways.

Explaining the properties (Supplement)

The particles may be atoms, molecules or ions.

  • Solid: strong attractive forces lock each particle in place, where it can only vibrate, so the shape stays fixed.
  • Liquid: attraction keeps the particles close, so the volume is fixed, but they have enough energy to swap places, so the liquid flows.
  • Gas: with the particles widely spread, the forces between them are tiny except in collisions. A gas spreads into any space, and its large gaps let it be squashed.

Particle motion and temperature (Core)

Warm a substance and its particles move faster: a solid's vibrations grow more vigorous, and the particles of a liquid or gas speed up. Cool it and they slow down.

The slowing has a limit. At absolute zero, −273 °C (0 K), the particles' kinetic energy is as low as it can possibly be, so nothing can be colder. Call this the least possible kinetic energy; never write that the particles stop.

Supplement (topic 2.2.2): particles in a sample have many different speeds, so temperature goes with their average kinetic energy.

Moving particles also cause gas pressure by hitting container walls. Brownian motion shows that they really move.

Worked example: identifying states from particles (Core)

Three samples: X: close together, arranged at random, moving past one another. Y: far apart, moving quickly in all directions. Z: touching in rows, each vibrating on the spot.

(a) Name each state. Z is a solid, X is a liquid and Y is a gas.

(b) Z is warmed until it becomes X. Name the change. Melting.

(c) Y is cooled until it becomes X. Describe what happens to the particles. They slow down and gather much closer together until most of them touch, but their layout stays random. This is condensation.

Simulation tasks

In the simulation above, States of matter opens on a cold solid with Heater power at Medium. Temperatures are on a model scale. The Potential energy card, and internal energy as total KE + total PE, go beyond 0625.

  1. (Core) Press Play, then Track: the ringed particle only trembles around one spot.
  2. (Core) Press Heat. Particles turn from blue towards red as Temperature rises. The State card moves from Changing state (melting) to Liquid, and the ringed particle starts to roam.
  3. (Core) Keep heating. After turning to gas (boiling or evaporation, in Cambridge's terms), the card shows Gas.
  4. (Core) Pick Gas under Start from, set Heater power to High and press Cool. Look for condensing, freezing, then Solid. The cooler cuts out at 12 K, so the reading stays above 0 K and the particles still vibrate.
  5. (Supplement) Here Temperature is always 100 times Average kinetic energy (in units).

Common mistakes

  • Saying that the particles in a solid are completely still. They are held in fixed positions, but they always vibrate about them, and the vibrations become more vigorous as the solid warms up.
  • Drawing the particles of a liquid with wide gaps, like a gas. In a liquid most particles are still touching; what is lost on melting is the regular pattern, not the closeness.
  • Claiming that particles swell, soften or melt when a substance is heated. Each particle keeps its size; only its motion and the spacing between particles change.
  • Calling a gas turning into a liquid 'evaporation'. The correct name is condensation, and the change from liquid to solid is freezing, or solidification.
  • Writing that particles stop moving at absolute zero, or that they stop at 0 °C. At −273 °C the particles' kinetic energy reaches its lowest possible value; at 0 °C, which is 273 K, they are still moving quickly.
  • (Supplement) Saying that a gas is easy to squash because its particles are small or soft. It is easy to squash because there are large spaces between the particles, so they can be pushed closer together.

Exam-style questions

Original questions written in the style of Cambridge IGCSE. Try each one before you reveal the answer.

  1. 1.A student draws particle diagrams for three samples, P, Q and R, of the same substance. In P the particles touch and sit in neat rows. In Q the particles are a long way apart. In R most of the particles touch, but they are jumbled.

    1. (a)State which sample is a liquid.

      1 mark
      Show the answer

      Answer: R

      Marking points

      • R
    2. (b)Describe how the particles in P move.

      1 mark
      Show the answer

      Answer: Each particle vibrates about a fixed position.

      Marking points

      • vibrating about fixed positions (vibrating in place)
    3. (c)Describe how the particles in Q are arranged and how they move.

      2 marks
      Show the answer

      Answer: The particles are far apart in a random arrangement, and they move quickly in random directions.

      Marking points

      • far apart / random (irregular) arrangement
      • move quickly (freely) in random directions
    4. (d)Sample R is cooled until it looks like sample P. Name this change of state.

      1 mark
      Show the answer

      Answer: Freezing (solidification)

      Marking points

      • freezing / solidification
    5. (e)Sample R is heated until it looks like sample Q. Name this change of state.

      1 mark
      Show the answer

      Answer: Boiling (or evaporation)

      Marking points

      • boiling / evaporation
  2. 2.A market stall in Dhaka sells blocks of ice, bottles of water and balloons filled with helium gas.

    1. (a)State one property that the ice has but the water does not have.

      1 mark
      Show the answer

      Answer: Ice keeps its own shape (it cannot flow).

      Marking points

      • fixed (definite) shape / does not flow
    2. (b)State one property that the water and the ice share but the helium does not have.

      1 mark
      Show the answer

      Answer: A fixed volume (or: they cannot easily be compressed).

      Marking points

      • fixed (definite) volume / cannot easily be compressed
    3. (c)The helium fills the whole balloon. Describe the separation and the arrangement of the helium particles.

      2 marks
      Show the answer

      Answer: The particles are far apart, with large spaces between them, and they are arranged randomly.

      Marking points

      • far apart / large spaces between particles
      • random (irregular) arrangement
    4. (d)(Supplement) Squeezing a balloon reduces the volume of the helium a little, but squeezing a sealed bottle full of water hardly changes the volume of the water. Explain this difference in terms of particles.

      2 marks
      Show the answer

      Answer: The helium particles have large spaces between them, so they can be pushed closer together. The water particles are already touching, so there is almost no space for them to move closer.

      Marking points

      • helium (gas) particles are far apart, so they can be pushed closer together
      • water (liquid) particles are already close together (touching), so they cannot move much closer
  3. 3.A copper rod is taken out of a freezer at −18 °C and left in a warm room at 30 °C.

    1. (a)Describe how the motion of the copper particles changes as the rod warms up.

      2 marks
      Show the answer

      Answer: The particles stay in fixed positions and vibrate, but they vibrate faster (more vigorously) as the temperature rises.

      Marking points

      • particles vibrate about fixed positions
      • they vibrate faster / more vigorously as the rod warms
    2. (b)The rod could, in principle, be cooled to a lowest possible temperature. State the name of this temperature and its value in °C.

      2 marks
      Show the answer

      Answer: It is called absolute zero, and its value is −273 °C.

      Marking points

      • name: absolute zero
      • value: −273 °C
    3. (c)Compare the kinetic energy of the copper particles at that lowest temperature with their kinetic energy at any higher temperature.

      1 mark
      Show the answer

      Answer: It is lower: at absolute zero the kinetic energy of the particles is at its minimum.

      Marking points

      • least (minimum) kinetic energy at absolute zero
    4. (d)(Supplement) The rod warms from −18 °C to 30 °C. Describe the change in the average kinetic energy of its particles.

      1 mark
      Show the answer

      Answer: It rises, because the particles move faster on average.

      Marking points

      • average kinetic energy increases
  4. 4.A cook in Lima pours oil from a tall narrow bottle into a wide shallow pan. The oil spreads across the bottom of the pan.

    1. (a)State two properties of a liquid that this shows.

      2 marks
      Show the answer

      Answer: A liquid can flow (be poured), and it takes the shape of its container while its volume stays the same.

      Marking points

      • one property from: flows (can be poured); takes the shape of its container; volume stays the same (fixed volume)
      • a second, different property from the same list
    2. (b)(Supplement) Use ideas about the forces between particles, and how the particles move, to explain why a liquid can flow but a solid cannot.

      3 marks
      Show the answer

      Answer: In a solid, strong attractive forces hold each particle in a fixed position, so it can only vibrate. In a liquid the particles are still held close together by attractive forces, but they have enough energy to move past one another, so the liquid can flow.

      Marking points

      • solid: strong forces hold particles in fixed positions (they only vibrate)
      • liquid: particles can move (slide) past one another
      • liquid particles have enough energy to change places / forces cannot hold them in fixed positions
    3. (c)(Supplement) Explain why a gas has no fixed volume.

      2 marks
      Show the answer

      Answer: The forces between gas particles are very weak because the particles are far apart, so nothing holds them together. They move freely and spread out to fill any container.

      Marking points

      • forces between gas particles are very weak (negligible)
      • particles move freely and spread out to fill the container

Quick check

6 questions

  1. 1.What is the name of the change of state when a gas becomes a liquid?
  2. 2.Which describes the particles in a liquid?
  3. 3.Which property does a gas have but a liquid does not?
  4. 4.A solid is warmed but does not melt. What happens to its particles?
  5. 5.Which statement about particles and temperature is correct?
  6. 6.(Supplement) Why can a gas be compressed much more easily than a solid?