Skip to content

Cambridge IGCSE Physics (0625) · Energy, work and power

Power

1.7.4

Power is the work done per unit time, and also the energy transferred per unit time: P = W/t = ΔE/t, measured in watts (1 W = 1 J/s). Moving the same energy in less time means more power. All of topic 1.7.4 is Core, and both equations must be recalled.

Loading simulation…

Symbols match your course. Open the full power and efficiency simulation for more presets and teacher tools.

What this topic covers

Two lifts can carry identical loads to the same floor, yet one arrives sooner. Power is the quantity that separates them: it is the rate at which work is done, or the rate of energy transfer.

Two ways to define power (Core)

Power is the work done per unit time. Equally, it is the energy transferred per unit time. These are one idea seen from two sides, because work done always equals energy transferred.

P=WtP=ΔEtP = \frac{W}{t} \qquad\qquad P = \frac{\Delta E}{t}
  • PP: power, in watts (W)
  • WW: work done, in joules (J)
  • ΔE\Delta E: energy transferred, in joules (J)
  • tt: time taken, in seconds (s)

You need to remember both equations. A watt is one joule per second, so a 9 W bulb is supplied with 9 J of energy every second. Larger powers are given in kilowatts (1 kW = 1000 W) or megawatts (1 MW = 1 000 000 W).

The letter W has two jobs here. In an equation, WW stands for work done. After a number, as in 500 W, it is the unit, the watt.

Same energy, different power (Core)

Power is not the same as work. Two climbers of equal weight who go up the same staircase do equal work against gravity. If one takes 8 s and the other 16 s, the quicker one develops twice the power. Halving the time doubles the power, and so does doubling the energy transferred in the same time.

To find the energy or the time, rearrange: ΔE=Pt\Delta E = Pt and t=ΔE/Pt = \Delta E / P. Change minutes and hours into seconds, and kJ or MJ into J, before you substitute.

Worked example 1: a kettle in Lagos (Core)

A kettle transfers 270 kJ of energy in 1.5 minutes. Calculate its power.

Convert first: 270 kJ = 270 000 J and 1.5 min = 90 s.

P=ΔEt=270 00090=3000 WP = \frac{\Delta E}{t} = \frac{270\,000}{90} = 3000\ \text{W}

Answer: 3000 W, which is 3.0 kW.

Worked example 2: up the stairs (Core)

A student of mass 62 kg climbs stairs with a vertical height of 4.5 m in 7.0 s. Take g=9.8g = 9.8 N/kg. Find the useful power developed.

Climbing steadily, the student does work against gravity equal to their weight times the vertical height:

weight=mg=62×9.8=607.6 N\text{weight} = mg = 62 \times 9.8 = 607.6\ \text{N} W=Fd=607.6×4.5=2734.2 JW = Fd = 607.6 \times 4.5 = 2734.2\ \text{J} P=Wt=2734.27.0=390.6 WP = \frac{W}{t} = \frac{2734.2}{7.0} = 390.6\ \text{W}

Answer: 391 W to 3 significant figures. Use the vertical height, never the length along the slope. Supplement candidates often reach the work in one line with ΔEp=mgΔh\Delta E_p = mg\Delta h.

Simulation tasks

In the simulation above, What to explore opens on Power race with People on stairs: two 50 kg climbers rise 10 m, Climber A in 20 s and Climber B in 10 s. Every value in the table is there before you press Play.

  1. (Core) Both climbers gain 4900 J, yet the Power row shows 245 W for A and 490 W for B. Press Play: B finishes first, and the line under the table names B as more powerful. The Working reaches 4900 J through ΔEp=mgΔh\Delta E_p = mg\Delta h, tagged Supplement; on Core papers, weight × height gives the same, 490 N × 10 m.
  2. (Core) Under Gradient tool measures, choose Climber A, then drag along A's line in the graph (Energy transferred against time). Its gradient, energy ÷ time, is 245 W. B's line goes flat from 10 s, once B is at the top; A only reaches the top as the graph ends, at 20 s.
  3. (Core) Pick Heavier climber, slower to the top in the Set-up menu. The 45 kg climber, A, finishes in 12 s; B, at 90 kg, needs 20 s but transfers 8820 J, so B has more power: 441 W against 368 W.
  4. (Core) Choose Crane with a 40% efficient motor, then Crane lifting in half the time. The energies do not change (29.4 kJ useful), but Useful power out rises from 980 W to 1960 W and Total power in from 2450 W to 4900 W.
  5. (Supplement) The Efficiency card, the Sankey diagram and several lines of the Working carry a Supplement tag. Useful power out ÷ Total power in is 0.400 for both cranes (980 ÷ 2450 and 1960 ÷ 4900), matching the energy ratio 29.4 ÷ 73.5.

Press End, beside Play, to jump straight to the finish of any run.

Equations

Common mistakes

  • Leaving the time in minutes. A 3.0 kW heater left on for 2 minutes transfers 3000 × 120 = 360 000 J, not 3000 × 2 = 6000 J.
  • Defining power as 'energy' or 'work done' alone. It is the energy transferred, or work done, per unit time (divided by the time taken).
  • Deciding that whoever does more work must be more powerful. Power depends on the time too: a heavier climber who is slow to the top can develop less power than a lighter, quicker one.
  • Mixing up the symbol W with the unit W. In P = W/t the W is work done in joules; in P = 500 W it is the watt.
  • Using mass where a force is needed. A 50 kg student climbing 3.0 m does 50 × 9.8 × 3.0 = 1470 J of work against gravity, not 50 × 3.0 = 150 J.
  • Using the length of a sloping staircase or ramp instead of the vertical height when finding the work done against gravity.

Exam-style questions

Original questions written in the style of Cambridge IGCSE. Try each one before you reveal the answer.

  1. 1.An electric pump on a farm lifts water into a storage tank. In 10 minutes the pump transfers 1.8 MJ of energy.

    1. (a)Define power.

      1 mark
      Show the answer

      Answer: The work done per unit time, or the energy transferred per unit time.

      Marking points

      • work done per unit time / energy transferred per unit time
    2. (b)Calculate the power of the pump.

      3 marks
      Show the answer

      Answer: 1.8 MJ = 1 800 000 J and 10 min = 600 s. P = ΔE ÷ t = 1 800 000 ÷ 600 = 3000 W (3.0 kW).

      Marking points

      • 1 800 000 J and 600 s used
      • P = ΔE ÷ t / 1 800 000 ÷ 600 seen
      • 3000 W (3.0 kW)
    3. (c)State how much energy the pump transfers each second.

      1 mark
      Show the answer

      Answer: 3000 J

      Marking points

      • 3000 J
  2. 2.Two students, X and Y, run up the same flight of stairs, which has a vertical height of 3.0 m. X has a weight of 520 N and takes 4.0 s. Y has a weight of 650 N and takes 6.5 s.

    1. (a)Calculate the work done against gravity by X.

      2 marks
      Show the answer

      Answer: W = Fd = 520 × 3.0 = 1560 J

      Marking points

      • 520 × 3.0 seen
      • 1560 J
    2. (b)Calculate the power developed by X.

      2 marks
      Show the answer

      Answer: P = W ÷ t = 1560 ÷ 4.0 = 390 W

      Marking points

      • 1560 ÷ 4.0 seen
      • 390 W
    3. (c)Show that Y develops less power than X, even though Y does more work.

      3 marks
      Show the answer

      Answer: Work done by Y = 650 × 3.0 = 1950 J, more than 1560 J. Power of Y = 1950 ÷ 6.5 = 300 W, which is less than 390 W.

      Marking points

      • work done by Y = 1950 J
      • power of Y = 1950 ÷ 6.5 = 300 W
      • comparison: 300 W < 390 W although 1950 J > 1560 J
  3. 3.A microwave oven has a power of 1.2 kW. It heats a bowl of soup for 2 minutes 30 seconds.

    1. (a)Calculate the energy transferred by the oven.

      3 marks
      Show the answer

      Answer: t = 150 s and P = 1200 W. ΔE = Pt = 1200 × 150 = 180 000 J (180 kJ).

      Marking points

      • 150 s and 1200 W used
      • ΔE = P × t
      • 180 000 J (180 kJ)
    2. (b)A second oven transfers the same amount of energy in 100 s. Calculate its power.

      2 marks
      Show the answer

      Answer: P = ΔE ÷ t = 180 000 ÷ 100 = 1800 W (1.8 kW)

      Marking points

      • 180 000 ÷ 100 seen
      • 1800 W (1.8 kW)
  4. 4.A goods lift raises a load of mass 480 kg through a vertical height of 35 m in 40 s, at a steady speed. Consider only the load. Take g as 9.8 N/kg.

    1. (a)Calculate the load’s weight.

      2 marks
      Show the answer

      Answer: weight = mg = 480 × 9.8 = 4704 N

      Marking points

      • 480 × 9.8 seen
      • 4704 N
    2. (b)Calculate the work done on the load.

      2 marks
      Show the answer

      Answer: W = Fd = 4704 × 35 = 164 640 J (≈ 165 kJ)

      Marking points

      • 4704 × 35 seen
      • 164 640 J (165 kJ)
    3. (c)Calculate the useful power output of the lift motor.

      2 marks
      Show the answer

      Answer: P = W ÷ t = 164 640 ÷ 40 = 4116 W ≈ 4.12 kW

      Marking points

      • 164 640 ÷ 40 seen
      • 4116 W (4.12 kW)
    4. (d)(Supplement) The total power input to the motor is 6.0 kW. Calculate the efficiency of the motor.

      2 marks
      Show the answer

      Answer: efficiency = useful power output ÷ total power input × 100% = 4116 ÷ 6000 × 100% = 68.6%

      Marking points

      • 4116 ÷ 6000 seen
      • 68.6% (0.686)

Quick check

6 questions

  1. 1.Which of these is the meaning of power?
  2. 2.Which of these is the same as one watt?
  3. 3.A motor does 7200 J of work in 1 minute. What is its power?
  4. 4.Two cranes lift identical loads through the same height. Crane P takes 30 s and crane Q takes 45 s. Which statement is correct?
  5. 5.A 2.0 kW heater is switched on for 15 s. How much energy does it transfer?
  6. 6.A 60 kg climber gains 5.0 m of vertical height in 12 s. Taking g = 9.8 N/kg, what useful power does the climber develop?