Input, useful output and waste
Every machine takes in energy in one form and hands it on in another. A water pump takes electrical energy and gives the water gravitational potential energy; a car engine takes the chemical energy of its fuel and gives the car kinetic energy.
- Input energy: the total energy supplied to the machine.
- Useful output energy: the part converted into the form we want.
- Waste energy: the rest, mostly heat (and some sound) produced by friction and electrical resistance. It spreads into the surroundings.
By the law of conservation of energy, nothing is lost overall:
Efficiency
Efficiency is the ratio of the useful output energy to the total input energy. It shows what fraction of the energy supplied ends up doing the job we want.
Multiply by 100 to give the percentage efficiency. The same ratio can be worked out from power, since power is energy per second:
Efficiency is a ratio of two energies (or two powers), so it has no unit. Learn both forms for the board exam; no formula sheet is given. The sim writes efficiency as .
Why no machine is 100% efficient
Some waste energy is produced in every real conversion, so the useful output is always less than the input and the efficiency is always less than 1 (100%). A machine that gave out all its input as useful energy would be an ideal machine, with an efficiency of 100%. No such machine has been built.
A perpetual motion machine, one that keeps working forever without any energy supply, is impossible. It would have to keep making energy from nothing, which breaks the law of conservation of energy. Friction alone would bring any real machine to a stop.
Efficiency can still be improved: oil and ball bearings reduce friction, and LED bulbs turn far more of their electrical energy into light than filament bulbs do.
Worked numerical 1: filling a rooftop tank
An electric pump uses 24 000 J of electrical energy to lift 150 kg of water into a rooftop tank 12 m above it. Find its efficiency. Take .
Data: input energy = 24 000 J; ,
The useful output is the potential energy gained by the water:
The other 6000 J becomes heat and sound in the motor, pump and pipes.
Worked numerical 2: a tube-well motor
A tube-well motor takes 1500 W from the supply and is 80% efficient. Find its useful power output and the power wasted.
Energy flow (Sankey) diagrams
Your textbook does not draw these, but they make efficiency easy to see. A wide arrow for the input splits into a useful arrow and waste arrows. Each width is in proportion to the energy it carries, so the branches together are exactly as wide as the input arrow.
Using the simulation
In the simulation above, the Electric kettle runs at 2000 W for 150 s. Press Play, or End to jump to the finish. The cards show Energy in 300 kJ, Useful 261 kJ (the internal (thermal) energy of the water), Waste 39.1 kJ and Efficiency 0.870 (87.0%). The Sankey diagram draws the same split.
- Scroll down to Check it with the equations, below the graphs. It works out the input from , takes away the useful energy to find the waste, then divides useful by input.
- Drag Power of the kettle to 1000 W and Time switched on to 300 s. The input is still 300 kJ, but the efficiency drops to 82.9%: a slower kettle loses more heat to the room.
- Choose Battery torch left on. With a Filament bulb, only 5.00% of the energy becomes light; choose LED and it rises to 25.0%.
- Choose Car braking to a stop and switch on Regenerative braking. The motor now stores part of the car's kinetic energy in the battery, giving 58.7%.
These efficiencies are example values from a simple model, but the calculation is exactly the one you use in the exam.