What AQA asks for (spec 4.1.2.1)
Spec point 4.1.2.1 is for both tiers, whether you take GCSE Physics or Combined Science. No equation comes with it. You should be able to:
- use the rule that energy is never created or destroyed, especially for closed systems
- give examples showing that every real change dissipates some energy
- explain how lubrication and thermal insulation reduce unwanted energy transfers
- describe how wall thickness and thermal conductivity affect how fast a building cools.
Required practical 2, comparing thermal insulators, is for GCSE Physics only. You never need to define thermal conductivity.
Energy is conserved
No process can make energy out of nothing or make it disappear. After any change, every joule is still somewhere: in a useful store, in its old store, or spread into the surroundings. Physicists call this the principle of conservation of energy.
A closed system is one where no energy enters or leaves. Inside it, energy can move between stores in any way, but the total stays exactly the same.
Worked example: a sledge run. A child and sledge, 30 kg in total, start from rest and slide down a slope that drops 8.0 m vertically. At the bottom they are moving at 9.0 m/s. Take N/kg. How much energy is dissipated on the way down?
Given: kg, m, m/s. Equations: and . Substitution: gravitational potential energy lost J; kinetic energy gained J. Answer: dissipated energy J, about 1100 J (2 s.f.). Friction and air resistance warmed the runners, snow and air. Check: 1215 J + 1137 J = 2352 J.
Dissipation: still there, but less useful
In every real change, some energy ends up where nobody wanted it, usually in thermal stores of the surroundings: friction warms moving parts, a current warms wires, and even sound fades into slightly warmer air. This energy is dissipated. It is now so spread out that putting it back to work is almost impossible. People often call it wasted, but it has not vanished.
Cutting unwanted energy transfers
- Lubrication. Oil or grease between rubbing surfaces reduces friction, so less energy is transferred by heating. That is why bicycle chains and engine parts are oiled.
- Thermal insulation. Materials that let energy pass through only slowly reduce heating of the surroundings: foam lagging on a hot-water tank, wool in a loft, a padded winter coat.
Walls, thickness and thermal conductivity
Copper has a high thermal conductivity, so energy is conducted through it quickly. Foam has a low thermal conductivity, so energy creeps through it slowly. A house loses energy through its walls more slowly, and so cools more slowly, when the walls:
- are made from materials with a lower thermal conductivity, such as foam in the cavity between brick layers
- are thicker, so the energy has further to travel.
In double glazing, the gas between the panes has a low thermal conductivity.
Required practical 2 (GCSE Physics only)
Pour equal volumes of hot water, all at the same starting temperature, into identical beakers. Wrap each in a different material of the same thickness, then record the temperature regularly for a fixed time, such as 10 minutes. The material with the smallest temperature drop is the best insulator. Another version changes the number of layers of one material. Take care with hot water to avoid scalds.
Using the simulation
In the simulation above, set the Scenario to Car braking to a stop. Under the cards it reads "Total right now: 135 kJ. At the start: 135 kJ." Press Play: the total holds steady, since car, brakes, road and air form a closed system. In Energy at key moments, press Show under Half the starting speed. The Kinetic store of the car holds 33.8 kJ, a quarter of its starting value; the Thermal store of the brakes has 98.9 kJ. By the end all 135 kJ is dissipated, so Useful shows 0 kJ. Switch on Regenerative braking, and 79.3 kJ ends up in the Chemical store of the battery instead.
Next choose Ball thrown straight up. Air resistance is already on: 1.16 J of the ball's 6.53 J is dissipated before it reaches the top. Switch it off and nothing is dissipated, which no real ball manages.