Skip to content

GCSE Physics — AQA · Energy

Power

4.1.1.4

Power is the rate of energy transfer, or the rate of doing work: P = E/t and P = W/t, both to recall. It is measured in watts, and 1 W means 1 J transferred each second. Doing the same job in less time needs a greater power. Both tiers, GCSE Physics and Combined Science.

Loading simulation…

Symbols match your course. Open the full power and efficiency simulation for more presets and teacher tools.

What AQA asks for (spec 4.1.1.4)

Power is tested on both tiers, in GCSE Physics and in Combined Science. The exam's equation sheet leaves out both power equations, so keep them in your memory. You should be able to:

  • define power as a rate: the rate of transferring energy, or the rate of doing work
  • recall and apply P=EtP = \dfrac{E}{t} and P=WtP = \dfrac{W}{t}
  • connect the watt to joules and seconds
  • explain, with an everyday comparison, why finishing the same job sooner means a bigger power.

Power means how fast, not how much

Power tells you how quickly energy is transferred, not how much. A slow phone charger and a fast one can put the same energy into a battery; the fast one gets there sooner because its power is higher.

The two equations

P=EtP=WtP = \frac{E}{t} \qquad\qquad P = \frac{W}{t}

Here PP is the power in watts (W), EE is the energy transferred in joules (J), WW is the work done in joules (J) and tt is the time in seconds (s). Work done is energy transferred, so both equations say the same thing; use whichever matches the question's wording.

One watt means one joule transferred every second. A 5 W bike light transfers 5 J each second, and a 2 kW kettle transfers 2000 J each second. Remember 1 kW = 1000 W and 1 MW = 1 000 000 W.

Worked example 1: a builder's hoist. A hoist lifts a 120 kg crate of roof tiles straight up through 5.0 m in 12 s, at a steady speed. Take g=9.8g = 9.8 N/kg. Find the useful power of the hoist.

Given: m=120m = 120 kg, h=5.0h = 5.0 m, t=12t = 12 s. Equations: at a steady speed the lifting force equals the weight, so the work done is mghmgh; then P=WtP = \dfrac{W}{t}. Substitution: W=120×9.8×5.0=5880W = 120 \times 9.8 \times 5.0 = 5880 J, so P=588012P = \dfrac{5880}{12}. Answer: P=490P = 490 W.

Worked example 2: a fan heater. A 2.4 kW fan heater runs for 15 minutes. How much energy does it transfer?

Given: P=2.4P = 2.4 kW =2400= 2400 W, t=15×60=900t = 15 \times 60 = 900 s. Equation: rearrange to E=PtE = Pt. Substitution: E=2400×900E = 2400 \times 900. Answer: E=2 160 000E = 2\,160\,000 J, about 2.2 MJ (2 s.f.).

Comparing two motors

Examiners like to test power with two machines doing the same job. Motors A and B each raise a 40 kg load through 12 m, so both do 40×9.8×12=470440 \times 9.8 \times 12 = 4704 J of work.

MotorWork doneTime takenPower
A4704 J24 s196 W
B4704 J8 s588 W

B needs only a third of the time, so its power is three times as big. Equally, in the same time, the more powerful motor does more work.

Using the simulation

In the simulation above, the Power race loads first. Climber A and Climber B are both 50 kg and climb 10 m, but A takes 20 s and B takes 10 s. Predict both powers, then check the table: each gains 4900 J, so A develops 245 W and B 490 W. The Working panel divides B's power by A's and gets 2.00.

Press Play. Under Gradient tool measures, choose Climber B, then drag along B's line on the Energy transferred against time graph. The gradient reads 490 W while B climbs. Once B reaches the top at 10 s, the line goes flat: no more energy is being transferred.

Next, choose Two motors lift equal loads from the Set-up list: the comparison in the table above. The Power row shows 196 W for Motor A and 588 W for Motor B; the Working panel gives the full 4704 J, while the simulation's Energy transferred row rounds it to 4700 J (3 s.f.). Then pick Heavier climber, slower to the top: Climber B arrives last, yet its power is 441 W against 368 W for Climber A.

The Motor efficiency scene, with Total power in and Useful power out, belongs to efficiency (spec 4.1.2.2).

Equations

Common mistakes

  • Leaving the time in minutes or hours. Power in watts needs the time in seconds: multiply minutes by 60 and hours by 3600.
  • Ignoring prefixes. A 2.5 kW heater has a power of 2500 W, and 3 MJ is 3 000 000 J.
  • Describing power as an amount of energy. Power is a rate: the energy transferred, or work done, each second.
  • Multiplying when you should divide. Power = energy ÷ time; it is energy that equals power × time.
  • Confusing the two Ws. In P = W/t, W is work done in joules; written after a number, as in 60 W, it is the unit watt.
  • Assuming the first to finish has the greater power. A heavier climber who takes a little longer may still transfer more energy each second, so compare energy and time together.

Exam-style questions

Original questions written in the style of GCSE AQA. Try each one before you reveal the answer.

  1. 1.Two electric motors, X and Y, are tested in a workshop. Each motor lifts a 40 kg load vertically through 2.5 m at a steady speed. Motor X takes 7.0 s. Motor Y takes 4.0 s. Gravitational field strength = 9.8 N/kg.

    1. (a)Write down the equation that links power, time and work done.

      1 mark
      Show the answer

      Answer: power = work done ÷ time (P = W / t)

      Marking points

      • power = work done ÷ time
    2. (b)Calculate the work done by each motor on its load.

      2 marks
      Show the answer

      Answer: Lifting force = weight = 40 × 9.8 = 392 N. Work done = 392 × 2.5 = 980 J.

      Marking points

      • 40 × 9.8 × 2.5 (or 392 × 2.5)
      • = 980 J
    3. (c)Calculate the power of motor Y.

      2 marks
      Show the answer

      Answer: P = 980 ÷ 4.0 = 245 W

      Marking points

      • P = 980 ÷ 4.0 (allow their work done from the part above)
      • P = 245 W
    4. (d)Explain why motor Y has a greater power than motor X.

      2 marks
      Show the answer

      Answer: Both motors do the same work, 980 J, because the loads and heights are the same. Motor Y does it in less time, so it transfers energy at a greater rate (245 W compared with 140 W for X).

      Marking points

      • Both motors do the same work (transfer the same energy), because the load and the height are the same.
      • Motor Y takes less time, so it does more work each second (a greater rate of energy transfer).
  2. 2.A hairdryer has a power of 1.8 kW.

    1. (a)State what is meant by a power of 1.8 kW.

      1 mark
      Show the answer

      Answer: The hairdryer transfers 1800 J of energy every second.

      Marking points

      • 1800 J of energy is transferred each second (accept 1.8 kJ per second).
    2. (b)Calculate the energy transferred by the hairdryer in 4.0 minutes.

      3 marks
      Show the answer

      Answer: P = 1800 W, t = 4.0 × 60 = 240 s. E = P t = 1800 × 240 = 432 000 J.

      Marking points

      • Converting units: 1800 W and 240 s
      • E = 1800 × 240
      • E = 432 000 J (accept 432 kJ)
    3. (c)A travel hairdryer transfers 216 000 J in the same 4.0 minutes. Calculate its power.

      2 marks
      Show the answer

      Answer: P = E ÷ t = 216 000 ÷ 240 = 900 W

      Marking points

      • P = 216 000 ÷ 240
      • P = 900 W
  3. 3.A student wants to find their useful power by running up a flight of stairs. The student's mass is 60 kg, the vertical height of the stairs is 3.5 m and the run takes 4.2 s. Gravitational field strength = 9.8 N/kg.

    1. (a)Name a measuring instrument the student could use to measure each of: mass, vertical height and time.

      3 marks
      Show the answer

      Answer: Mass: bathroom scales (or a balance). Vertical height: a metre rule or tape measure. Time: a stopwatch.

      Marking points

      • Mass: (bathroom) scales
      • Vertical height: metre rule or tape measure
      • Time: stopwatch
    2. (b)Calculate the energy transferred to the student's gravitational potential energy store.

      2 marks
      Show the answer

      Answer: E_p = m g h = 60 × 9.8 × 3.5 = 2058 J

      Marking points

      • E_p = 60 × 9.8 × 3.5
      • E_p = 2058 J (accept 2100 J)
    3. (c)Calculate the student's useful power.

      2 marks
      Show the answer

      Answer: P = E ÷ t = 2058 ÷ 4.2 = 490 W

      Marking points

      • P = 2058 ÷ 4.2 (allow their energy from the part above)
      • P = 490 W
    4. (d)Energy leaves the chemical store in the student's muscles at a much greater rate than 490 W. Explain why.

      2 marks
      Show the answer

      Answer: Much of the energy transferred by the muscles is not useful: it is dissipated, mostly by heating the body and the surroundings. So the total rate of transfer from the chemical store is greater than the useful power.

      Marking points

      • Some energy is wasted / dissipated (e.g. heating the student's body and the surroundings, or as sound).
      • So the total rate of energy transfer is greater than the useful rate of transfer to the gravitational potential energy store.
  4. 4.A lift carries passengers upwards at a steady speed. The lift motor has a useful power output of 9.8 kW. The lift and passengers have a total mass of 1000 kg. Gravitational field strength = 9.8 N/kg.

    1. (a)Calculate the work done by the motor in 25 s.

      2 marks
      Show the answer

      Answer: W = P t = 9800 × 25 = 245 000 J

      Marking points

      • W = 9800 × 25
      • W = 245 000 J
    2. (b)Calculate how high the lift rises in this time.

      3 marks
      Show the answer

      Answer: Lifting force = weight = 1000 × 9.8 = 9800 N. Height = work done ÷ force = 245 000 ÷ 9800 = 25 m.

      Marking points

      • Weight = 1000 × 9.8 = 9800 N
      • Height = 245 000 ÷ 9800 (allow their work done from the part above)
      • Height = 25 m
    3. (c)A second lift carries the same load through the same height. Its motor has a useful power output of 7.0 kW. Calculate how long the second lift takes.

      2 marks
      Show the answer

      Answer: t = W ÷ P = 245 000 ÷ 7000 = 35 s

      Marking points

      • t = 245 000 ÷ 7000
      • t = 35 s

Quick check

6 questions

  1. 1.Which of these is the definition of power?
  2. 2.A motor transfers 1500 J of energy in 30 s. What is its power?
  3. 3.How much energy does a 40 W lamp transfer in 2.0 minutes?
  4. 4.Crane A lifts a crate through a certain height in 30 s. Crane B lifts an identical crate through the same height in 20 s. What is the power of crane B divided by the power of crane A?
  5. 5.Which of these means the same as a power of 3 kW?
  6. 6.A motor with a power of 750 W does 15 kJ of work. How long does this take?