Skip to content

Cambridge IGCSE Physics (0625) · Forces

Friction and drag

1.21.5.1

Friction acts between surfaces in contact. It can stop motion starting, slows moving objects and causes heating. Drag is friction on objects moving through liquids or gases, such as air resistance (all Core). Using F = ma with friction, and terminal velocity, are Supplement.

Loading simulation…

Symbols match your course. Open the full static and kinetic friction simulation for more presets and teacher tools.

What this topic covers

Friction acts whenever surfaces rub or an object moves through air or water.

Friction between solid surfaces (Core)

Where two solid surfaces touch, tiny bumps on each one catch on the other. This produces friction, a force along the surfaces that opposes sliding. On a sliding object it points backwards, against the motion.

Friction can stop motion before it starts. Push a heavy wardrobe gently and it stays put, because friction pushes back exactly as hard as you push and the resultant force is zero. Push harder and it eventually slides. Once something is moving, friction slows it down unless another force keeps it going.

Friction causes heating (Core)

When surfaces slide over each other, work is done against friction. Energy is transferred from the kinetic store of the moving object to the internal (thermal) store of the surfaces, which warm up. Rubbed hands feel warm, and a bike's brake blocks get hot after a hard stop from high speed. Oil in an engine reduces friction, so the moving parts waste less energy and wear more slowly.

Friction can also help: shoes and tyres need grip to push off, turn and brake.

Drag in liquids and gases (Core)

An object moving through a liquid or a gas must push it aside, and the liquid or gas pushes back. This friction force is called drag. In water it is often called water resistance; in air it is air resistance. It acts against the motion of swimmers, boats, hailstones and cyclists. Streamlined shapes reduce drag; a parachute is built to increase it.

Worked example 1: a steady cyclist (Core)

A cyclist in Copenhagen pedals along a flat road with a forward force of 180 N. Air resistance is 140 N, and friction in the tyres and bearings is 40 N. Find the resultant force.

Taking forwards as positive:

Fresultant=180−140−40=0 NF_{\text{resultant}} = 180 - 140 - 40 = 0\ \text{N}

Answer: zero, so the speed stays constant. If a headwind raises the air resistance to 165 N, then 180−165−40=−25180 - 165 - 40 = -25 N: a 25 N backward resultant, and the cyclist slows down.

Worked example 2: pulling a sledge (Supplement)

A child in Norway pulls a 25 kg sledge over level snow with a horizontal force of 60 N. Friction on the runners is 35 N. Find the acceleration.

Given: m=25m = 25 kg, a 60 N pull and 35 N of friction, so the resultant is F=60−35=25F = 60 - 35 = 25 N.

a=Fm=2525=1.0 m/s2a = \frac{F}{m} = \frac{25}{25} = 1.0\ \text{m/s}^2

Answer: 1.0 m/s² in the direction of the pull. Using the 60 N pull alone would wrongly give 2.4 m/s².

Drag grows with speed (Supplement)

Drag increases as an object moves faster. A falling skydiver's weight stays the same, but the air resistance rises with speed until the two are equal. With no resultant force left, the skydiver falls at a steady terminal velocity. Explore this with the falling-object simulation.

In the simulation above

The sim starts with a 2 kg block of wood on a wooden bench. The Normal contact force card reads 19.6 N and, with no pull, Friction shows 0.

  1. (Core) Drag the Applied force slider to 4.0 N. The block stays still: Friction reads 4.00 N (static, can reach 9.80 N) and the Resultant force is 0.
  2. (Core) Press Pull beside Play. The pull climbs by 2 N every second and friction keeps pace until the pull passes 9.80 N. The block slips, and friction drops to 5.88 N. A second press on Pull holds the force steady, yet the block keeps accelerating: the pull now beats friction.
  3. (Core) Press Ease. Once the pull falls below 5.88 N, the backward resultant force brings the block to a stop.
  4. (Core) Under Surfaces in contact, choose Steel block on ice and press Pull. The block slips at only 0.784 N and slides against just 0.392 N of friction.

The Friction against applied force graph shows a rising line, a sudden drop, then a flat line. The sim calculates friction from coefficients (μs\mu_s, μk\mu_k), a model detail that Cambridge does not ask you to use.

Common mistakes

  • Thinking friction only acts on moving objects. A crate that is pushed but does not move has friction on it, exactly balancing the push.
  • Drawing friction in the direction of motion. On a sliding object it points backwards, opposing the motion.
  • Forgetting that air resistance and water resistance are both kinds of friction, called drag. A question may use any of these names.
  • Assuming a moving object needs an unbalanced forward force to keep going. At constant speed, the driving force exactly balances friction and drag.
  • Saying friction destroys or uses up energy. The energy is transferred to the internal (thermal) store of the surfaces and the surroundings, and the total stays the same.
  • (Supplement) Dividing the driving force alone by the mass. In F = ma, F is the resultant force, so subtract friction and drag first.

Exam-style questions

Original questions written in the style of Cambridge IGCSE. Try each one before you reveal the answer.

  1. 1.A cyclist squeezes the brake levers to slow down. Rubber brake blocks press against the metal rims of the moving wheels.

    1. (a)Describe what is meant by friction.

      2 marks
      Show the answer

      Answer: Friction is a force that acts where two surfaces touch, and it opposes (tends to stop) one surface sliding over the other.

      Marking points

      • force between two surfaces in contact
      • opposes motion / sliding (may stop or slow it)
    2. (b)At the bottom of a long, steep hill, the brake blocks and rims are hot. Explain why.

      2 marks
      Show the answer

      Answer: Work is done against friction between the blocks and the rims. Going down the hill, this transfers energy from the gravitational potential (and kinetic) store of the bike and rider to the internal (thermal) store of the blocks and rims.

      Marking points

      • friction between blocks and rims / work done against friction
      • gravitational potential / kinetic energy transferred to internal (thermal) energy of blocks and rims
    3. (c)State one way in which friction is useful to the cyclist, apart from braking.

      1 mark
      Show the answer

      Answer: Grip between the tyres and the road lets the bike be driven forwards and turn corners without skidding (or grip of hands and feet on the handlebars and pedals).

      Marking points

      • any one valid use, e.g. tyre grip to move forwards / to turn without skidding, grip on handlebars or pedals
  2. 2.A motor boat crosses a lake. The forward force from its propeller is 2600 N. Water resistance on the hull is 1900 N and air resistance on the boat is 300 N.

    1. (a)Water resistance and air resistance are examples of the same type of force. Name this type of force.

      1 mark
      Show the answer

      Answer: Drag (a friction force).

      Marking points

      • drag / friction
    2. (b)Work out the resultant force acting on the boat, including its direction.

      2 marks
      Show the answer

      Answer: 2600 − 1900 − 300 = 400 N, forwards.

      Marking points

      • 400 N
      • forwards / in the direction of the propeller force
    3. (c)State how the speed of the boat changes.

      1 mark
      Show the answer

      Answer: It increases.

      Marking points

      • speed increases / boat accelerates
    4. (d)(Supplement) The propeller force stays at 2600 N. Explain why the boat eventually stops speeding up.

      2 marks
      Show the answer

      Answer: Water resistance and air resistance grow as the speed increases. When the backward forces add up to 2600 N, the resultant force is zero, so there is no acceleration.

      Marking points

      • drag (water / air resistance) increases with speed
      • backward forces reach 2600 N, so resultant force is zero / no acceleration
  3. 3.A warehouse worker pushes horizontally on a heavy crate that is resting on the floor. At first the crate does not move.

    1. (a)The push is 150 N. State the size and the direction of the friction force on the crate.

      2 marks
      Show the answer

      Answer: 150 N, in the opposite direction to the push.

      Marking points

      • 150 N
      • opposite to the push
    2. (b)Explain how you decided on the size of the friction force.

      1 mark
      Show the answer

      Answer: The crate stays at rest, so no resultant force acts and friction must balance the push.

      Marking points

      • crate at rest so resultant force is zero / forces are balanced
    3. (c)The worker pushes harder and the crate starts to slide. It then moves at a constant speed while the push is 210 N. State the friction force on the crate now.

      1 mark
      Show the answer

      Answer: 210 N (constant speed means the resultant force is zero).

      Marking points

      • 210 N
    4. (d)Suggest one way of making the crate easier to slide.

      1 mark
      Show the answer

      Answer: Any sensible way, such as putting it on rollers or a trolley, oiling or smoothing the floor, or taking some of the contents out.

      Marking points

      • any one valid method, e.g. rollers / wheels, lubricating the floor, making the crate lighter
  4. 4.A 1200 kg car travels along a straight, level road. The driving force is 3000 N. Friction and air resistance together come to 840 N.

    1. (a)(Supplement) Calculate the acceleration of the car.

      3 marks
      Show the answer

      Answer: Resultant force = 3000 − 840 = 2160 N; a = F ÷ m = 2160 ÷ 1200 = 1.8 m/s²

      Marking points

      • resultant force = 2160 N
      • a = F ÷ m used with the resultant force
      • 1.8 m/s²
    2. (b)(Supplement) As the car goes faster, the air resistance increases. The driving force does not change. Describe and explain what happens to the acceleration.

      2 marks
      Show the answer

      Answer: The acceleration decreases, because the resultant force gets smaller while the mass stays the same.

      Marking points

      • acceleration decreases
      • resultant force decreases
    3. (c)(Supplement) What is the total resistive force once the car reaches its top speed?

      1 mark
      Show the answer

      Answer: 3000 N, equal to the driving force.

      Marking points

      • 3000 N

Quick check

6 questions

  1. 1.Which statement about friction between two solid surfaces is correct?
  2. 2.A swimmer moves through water. What is the name of the force from the water that opposes the swimmer's motion?
  3. 3.A moving car brakes and stops. Into which energy store is most of its kinetic energy transferred?
  4. 4.A box is pushed across a level floor at a constant speed by a horizontal force of 45 N. What is the friction force on the box?
  5. 5.A cyclist rides at a steady speed. Which change would reduce the air resistance on the cyclist at that speed?
  6. 6.(Supplement) A 4.0 kg trolley is pulled with a force of 20 N while friction on it is 8.0 N. What is its acceleration?