What this topic covers
A force can turn an object as well as move it.
Turning effects (Core)
The moment of a force measures how strongly it turns an object about a pivot, the fixed point it rotates around. Door handles sit far from the hinges, long spanners loosen stiff nuts, and children tip a see-saw. A bigger force, or the same force further from the pivot, turns more strongly.
Calculating a moment (Core)
Cambridge provides no equation sheet, so learn this:
Newtons times metres gives newton metres (N m). Measure the distance at right angles to the force's line of action, so a force whose line passes through the pivot has zero moment. Every moment is either clockwise or anticlockwise.
Worked example 1: a stiff nut (Core)
A plumber in Lima pushes on a spanner with 150 N, at right angles, 0.30 m from the centre of a nut. Find the moment, and the force giving the same moment on a 0.20 m spanner.
Given: N, m.
Answer: 45 N m; the shorter spanner needs 225 N.
The principle of moments (Core)
For a balanced object, the total clockwise moment about the pivot equals the total anticlockwise moment about it. With one force each side, .
Worked example 2: a see-saw (Core)
On a see-saw in Manila, the uniform plank is pivoted at its middle, so its weight has no moment. A 270 N child sits 1.6 m left of the pivot. Where should a 480 N child sit?
Answer: 0.90 m right of the pivot, nearer the middle than the lighter child.
Equilibrium (Core)
An object is in equilibrium when there is no resultant force and no resultant moment on it. Both are needed. On the balanced see-saw, the pivot pushes up as hard as everything pulls down: with a 250 N plank, N.
More forces on one side (Supplement)
Add all the clockwise moments, add all the anticlockwise moments, and set the totals equal, giving each force its own distance. A uniform beam's weight acts at its centre, so it is one more force whenever the pivot is elsewhere.
Worked example 3. A uniform metre rule is supported at its centre. Weights of 2.0 N and 3.0 N hang 0.40 m and 0.20 m left of the pivot. What weight , 0.35 m to the right, balances it?
The balancing experiment (Supplement)
Pivot a metre rule where it balances empty, so its weight has no moment. Hang slotted masses on both sides, two or more on one side, and slide one until the rule is level. Read each distance from the pivot, convert masses to weights with , and compare the totals: they should agree within experimental error. Repeat with other arrangements.
In the simulation above
The sim opens on Two weights in balance: pegs hold a metre rule level on a central pivot, with A (3 N) 20 cm left and B (2 N) 30 cm right. Each side totals 0.600 N m.
- (Core) Press Release under the stage. The rule stays level and shows Balanced; Upward force from the pivot reads 6 N, the 1 N rule plus both weights.
- (Core) Drag B to the 85 cm mark, or select B and set its Position on the scale slider to 85 cm. Its moment grows to 0.700 N m and, once the pegs let go, the right end drops. Level holds it again.
- (Core) Choose Find an unknown weight, press Release and slide the 3 N weight until the rule balances. Calculate the weight marked ?, then press Reveal.
- (Supplement) Choose Two weights against one and check that 1 × 0.40 + 2 × 0.15 = 3.5 × 0.20. Press Add to hang 1 N at the 90 cm mark, then find where B must go to rebalance.