Skip to content

Punjab Board Class 9 Physics · Turning effects of force

Equilibrium and its conditions

Section 4.8Section 4.9

A body in equilibrium has no acceleration, so it is at rest (static equilibrium) or moving with uniform velocity (dynamic equilibrium). First condition: the vector sum of all forces is zero, ΣFx = 0 and ΣFy = 0. Second condition: the sum of all torques is zero, Στ = 0.

Loading simulation…

Symbols match your course. Open the full free-body diagrams and resultant force simulation for more presets and teacher tools.

When is a body in equilibrium?

A body is in equilibrium when it has no acceleration. Its velocity does not change at all: not in size and not in direction. By Newton's second law, zero acceleration means the resultant of all the forces on the body is zero. By the first law, such a body is either at rest or moving with uniform velocity.

Your textbook names the two possibilities:

  • Static equilibrium: the body is at rest. A water tank standing on a rooftop, a framed photograph hanging on a nail and a lantern hanging from a hook are all in static equilibrium.
  • Dynamic equilibrium: the body moves with uniform velocity. A car cruising at a steady speed on a straight stretch of the motorway, a lift rising at a constant speed and a raindrop falling at terminal velocity are all in dynamic equilibrium.

Both kinds have forces acting on them. The forces simply cancel.

First condition of equilibrium

Put a=0a = 0 into F=maF = ma and the net force must be zero:

ΣF=0\Sigma F = 0

First condition of equilibrium: the external forces acting on a body must have a vector sum of zero. A body that meets it is in translational equilibrium: it does not speed up, slow down or change direction.

When the forces lie at angles, resolve each one into rectangular components and add the components separately. The first condition then becomes two equations:

ΣFx=0ΣFy=0\Sigma F_x = 0 \qquad \Sigma F_y = 0

Second condition of equilibrium

A zero resultant force does not stop a body from turning. Lay a metre rule flat on a table. Push one end away from you and pull the other end towards you, with equal forces at right angles to the rule. The forces cancel, so the first condition holds, yet the rule spins. The two forces act along different lines, and together they form a couple.

So a second condition is needed for rotational equilibrium: the torques on the body must cancel, so that their sum about any point is zero, Στ=0\Sigma \tau = 0. A body is in complete equilibrium only when both conditions hold. Torque is covered in section 4.3 and the principle of moments in section 4.6.

Worked numerical 1: dynamic equilibrium

A box of mass 30 kg is pulled across a level floor at a constant velocity by a horizontal rope. The friction on it is 90 N. Find the tension in the rope and the normal force. Take g=10 N kg−1g = 10\ \text{N kg}^{-1}.

The velocity is constant, so the box is in dynamic equilibrium and ΣFx=0\Sigma F_x = 0, ΣFy=0\Sigma F_y = 0.

Horizontal: T−90=0T - 90 = 0, so T=90 NT = 90\ \text{N}.

Vertical: the weight is w=mg=30×10=300 Nw = mg = 30 \times 10 = 300\ \text{N}. The normal force must cancel it, so the normal force is 300 N upwards.

Worked numerical 2: forces at angles

Three ropes pull on a ring, each with a force of 6 N. One pulls straight up (90°). The others pull at 210° and 330°, measured anticlockwise from the right. Show that the ring is in equilibrium. Use cos⁡30∘=0.866\cos 30^\circ = 0.866 and sin⁡30∘=0.5\sin 30^\circ = 0.5.

Forcex-component (N)y-component (N)
6 N at 90°0+6
6 N at 210°−6 cos 30° = −5.20−6 sin 30° = −3
6 N at 330°+6 cos 30° = +5.20−6 sin 30° = −3
ΣFx=0−5.20+5.20=0ΣFy=6−3−3=0\Sigma F_x = 0 - 5.20 + 5.20 = 0 \qquad \Sigma F_y = 6 - 3 - 3 = 0

Both sums are zero, so the first condition is met.

Exploring equilibrium in the simulation

In the simulation above, every arrow starts at the centre of the object, so all the forces act through one point. Forces like these cannot turn the object, which means the simulation tests the first condition only.

Choose Three ropes in balance to see worked numerical 2. Tap each Tension chip under Forces in turn. The line Components of this force gives that rope's x- and y-components, while the Horizontal total and Vertical total readouts both stay at 0.

Box on a table shows static equilibrium. Skydiver at terminal velocity shows dynamic equilibrium: the panel still reads Balanced forces, and What next? gives Constant velocity.

Finally, choose Tug of war: unbalanced and press Balance. The simulation adds the one force that restores equilibrium: 30.0 N, pointing opposite to the resultant.

Common mistakes

  • Saying a body in equilibrium must be at rest. A body moving with uniform velocity is also in equilibrium (dynamic equilibrium).
  • Saying no forces act on a body in equilibrium. Forces do act; their vector sum is zero.
  • Adding the sizes of forces at angles directly. Resolve each force into x- and y-components and make each sum zero separately.
  • Thinking the first condition alone guarantees equilibrium. Equal and opposite forces along different lines (a couple) give zero resultant force but still turn the body; the second condition, Στ = 0, is needed too.
  • Calling a body moving at constant speed around a curve 'in equilibrium'. Its direction changes, so it is accelerating and a net force acts on it.
  • Forgetting the minus signs on components that point left or down when applying ΣFx = 0 and ΣFy = 0.

Exam-style questions

Original questions written in the style of Punjab board exams. Try each one before you reveal the answer.

  1. 1.Bodies can be in static or dynamic equilibrium.

    1. (a)When is a body said to be in equilibrium?

      1 mark
      Show the answer

      Answer: When it has no acceleration (the resultant force on it is zero), so it is at rest or moves with uniform velocity.

      Marking points

      • It has no acceleration (resultant force zero)
    2. (b)Distinguish between static and dynamic equilibrium, giving one example of each.

      2 marks
      Show the answer

      Answer: Static equilibrium: the body is at rest, e.g. a book lying on a table. Dynamic equilibrium: the body moves with uniform velocity, e.g. a car moving at constant speed along a straight road.

      Marking points

      • Static: at rest, with a correct example
      • Dynamic: moving with uniform velocity, with a correct example
  2. 2.Two conditions must be satisfied for a body to be in complete equilibrium.

    1. (a)State the first condition of equilibrium and write it in terms of components.

      2 marks
      Show the answer

      Answer: The vector sum of all the external forces acting on the body must be zero (ΣF = 0). In components: ΣFx = 0 and ΣFy = 0.

      Marking points

      • Vector sum of all external forces is zero (ΣF = 0)
      • ΣFx = 0 and ΣFy = 0
    2. (b)State the second condition of equilibrium. Explain why it is needed.

      2 marks
      Show the answer

      Answer: The sum of all the torques acting on the body about any point must be zero (Στ = 0). It is needed because two equal and opposite forces acting along different lines (a couple) give zero resultant force but still rotate the body.

      Marking points

      • Sum of all torques about any point is zero (Στ = 0)
      • Zero resultant force can still produce rotation (e.g. a couple)
  3. 3.A lift of mass 600 kg is pulled upwards by its cable at a steady speed of 1.5 m s⁻¹. Ignore friction and air resistance. Take g = 10 N kg⁻¹.

    1. (a)State the acceleration of the lift and the type of equilibrium it is in.

      2 marks
      Show the answer

      Answer: Zero acceleration, because its velocity is constant. It is in dynamic equilibrium.

      Marking points

      • Acceleration is zero
      • Dynamic equilibrium
    2. (b)Calculate the tension in the cable.

      2 marks
      Show the answer

      Answer: By the first condition, T − w = 0, so T = w = mg = 600 × 10 = 6000 N.

      Marking points

      • T = w = mg (ΣFy = 0)
      • 6000 N
  4. 4.Two forces act on a small ring: 20 N towards the east and 15 N towards the north. A third force F keeps the ring in equilibrium.

    1. (a)Write down the x- and y-components of F, taking east and north as positive.

      2 marks
      Show the answer

      Answer: ΣFx = 0 gives 20 + Fx = 0, so Fx = −20 N. ΣFy = 0 gives 15 + Fy = 0, so Fy = −15 N.

      Marking points

      • Fx = −20 N
      • Fy = −15 N
    2. (b)Calculate the size of F and describe its direction.

      3 marks
      Show the answer

      Answer: F = √(20² + 15²) = √625 = 25 N. tan θ = 15 ÷ 20, so θ = 36.9°. F points 36.9° south of west (opposite to the resultant of the two given forces).

      Marking points

      • F = √(20² + 15²)
      • 25 N
      • Direction 36.9° south of west

Quick check

6 questions

  1. 1.A body is in equilibrium when its:
  2. 2.A car moves along a straight road at a constant velocity. It is in:
  3. 3.The first condition of equilibrium is:
  4. 4.The second condition of equilibrium ensures that a body has no:
  5. 5.Two equal and opposite forces act on a metre rule along different lines. The rule:
  6. 6.A 5 kg lamp hangs at rest from a single chain. Taking g = 10 N kg⁻¹, the tension in the chain is: