What this simulation shows
An object sits in the middle of the picture: a crate, a box on a table, a rope, a plane, a skydiver or a puck on ice. Each arrow that starts at its centre is one force acting on it. Arrow length is proportional to force, and the grid behind the arrows sets the scale, printed in the top corner, for example "1 square = 5 N". Count squares along an arrow and you have measured that force, exactly as you would on a scale drawing.
You can have up to five forces. Drag the round handle at the tip of an arrow to change its size and direction, or drag outwards from the object to create a new force. Every drag has a slider, a number box and keyboard keys as an alternative, so you can also type exact values such as 233.1°.
How the resultant is found
The red striped arrow is the resultant force: the one force that would have the same effect as all of them together. The simulation finds it by adding the forces as vectors.
- Forces along one line. Add those pointing one way and subtract those pointing the other way. A 12 N push against 8 N of friction leaves 4 N in the direction of the push.
- Two forces at right angles. Drawn tip to tail they make a right-angled triangle, so Pythagoras gives the size, , and trigonometry gives the direction, , so .
- Any set of forces. Each force is split into a horizontal part, , and a vertical part, . Adding all the horizontal parts gives and adding all the vertical parts gives . Pythagoras then combines the two totals. Turn on the components to see them as dashed arrows forming a right-angled triangle with the resultant.
Directions are measured anticlockwise from the direction pointing right, from 0° up to 360°. So 90° is straight up, 180° is to the left and 270° is straight down.
Balanced forces
When the resultant is zero, the green Balanced badge appears and the object glows. Zero here means zero to three significant figures, which is the precision every force is displayed to.
Balanced does not mean that nothing is happening. A box resting on a table and a plane cruising through the sky both have balanced forces on them. When the resultant force is zero the velocity cannot change, so a resting object remains at rest while a moving one keeps going with unchanged speed and direction. That idea is Newton's first law.
The vector diagram
Switch the view to the vector diagram to see the same forces drawn tip to tail. The first arrow starts at a point, and each new arrow begins where the previous one ended. The resultant joins the starting point to the final tip. If the forces balance, the final tip lands back on the start. Forces that do not all lie along one line then close into a triangle or another polygon. Scale-drawing questions use this method: you measure the closing side with a ruler and its angle with a protractor.
What happens next
Press What next? to let the forces act for three seconds. The simulation applies using the mass you choose, so the acceleration always points along the resultant. A faint copy of the object is left every half second. Equal gaps mean a constant velocity, while growing gaps show the object speeding up. Give it a starting speed to check that balanced forces keep a moving object moving.
The ready-made situations use round numbers to keep the arithmetic simple. Any weight is calculated from with the value of g used by your course.