What AQA asks for (spec 4.5.1.4)
- Both tiers: know what a resultant force is, and calculate the resultant of two forces along the same straight line.
- Higher tier only: describe the forces on an isolated object or system, use free-body diagrams (including balanced cases), resolve a force into two components at right angles, and use vector diagrams for resultants, resolution and equilibrium. These are scale drawings only; trigonometry is not expected.
There is no equation to learn for this spec point.
One force in place of many
Usually several forces act on an object at once. You can replace all of them with one force that would do exactly the same job. That one force is the resultant force. When it is zero, the forces are balanced.
Forces in a straight line (both tiers)
Call one direction positive. Forces that point along it count as plus, forces pointing back count as minus, and then you add them all together. The sign of the answer tells you which way the resultant acts.
Worked example 1: a delivery cyclist. Pedalling produces a forward driving force of 140 N. Air resistance of 55 N and friction of 15 N act backwards.
Given: forward 140 N; backward 55 N and 15 N. Equation (in words): resultant force = total forward force − total backward force. Substitution: . Answer: a resultant of 70 N forwards.
Higher tier: free-body diagrams
A free-body diagram shows one object on its own, with an arrow for every force acting on it. Forces the object exerts on other things are left off. Label each arrow with its name and, if known, its size. A lift speeding up on its way up has a tension arrow longer than its weight arrow, so the resultant points up.
You can also treat several objects as one system. For a lorry towing a trailer, the coupling forces act inside that system, so they vanish from its diagram.
Higher tier: splitting a force into components
Any single force can be replaced by two forces at right angles that together have the same effect. Someone pulls a wheeled suitcase with 50 N along its handle, at 30° above the horizontal. At a scale of 1 cm to 10 N, draw a 5.0 cm line at 30°, then complete a rectangle with horizontal and vertical sides. They measure about 4.3 cm and 2.5 cm, so the components are about 43 N forwards and 25 N upwards. Only the 43 N part drags the case along.
Higher tier: adding forces at an angle
Draw the forces tip to tail to scale, starting each new arrow where the previous one ended. The resultant is the arrow from your starting point to the final tip. Its length gives the size; a protractor gives the direction.
Worked example 2: two tugboats. One tug pulls a ship east with 60 kN and another pulls north with 80 kN.
Given: 60 kN east, 80 kN north. Scale: 1 cm to 10 kN, so the arrows are 6.0 cm and 8.0 cm long. Drawing: the closing side measures 10.0 cm, at 53° from the east line. Answer: a resultant of 100 kN, about 53° north of east.
As a check, the forces are at right angles, so Pythagoras gives kN.
When the arrows drawn tip to tail finish exactly where they began, they make a closed shape. The resultant is zero and the object is in equilibrium.
Using the simulation
In the simulation above, choose Tug of war: unbalanced. Two tensions pull on the rope, 180 N to the left and 150 N to the right. Work out the resultant, then compare with the readouts: 30.0 N at 180°. Angles go anticlockwise from the right, so 180° means left. Press Balance: a 30 N force to the right is added and the Balanced badge appears.
For the Higher-tier ideas, pick Two forces at right angles, then switch View to Vector diagram. The 3 N and 4 N arrows join tip to tail, and the 5 N resultant closes the triangle at 53.1°. Three ropes in balance shows three equal 6 N pulls making a closed triangle.
To test the suitcase example, select the empty situation, then press Add and type 50 in Size (N) and 30 in Direction (°). The Horizontal total and Vertical total readouts give the components: 43.3 N and 25.0 N.