Skip to content

GCSE Physics — AQA · Forces

Work done and energy transfer

4.5.2

A force does work when it moves an object along the force's line of action: W = Fs (recall it), in joules, where 1 J = 1 N m. Work done is energy transferred between stores, and work done against friction raises the temperature of the surfaces. Both tiers, GCSE Physics and Combined Science.

Loading simulation…

Symbols match your course. Open the full work done simulation for more presets and teacher tools.

What AQA asks for (spec 4.5.2)

Spec point 4.5.2 sits on both tiers, in GCSE Physics and in Combined Science. You need to:

  • recall and use W=FsW = Fs, which is missing from the equation sheet, so learn it by heart
  • treat work done as energy transferred, and name the stores that change
  • switch between newton-metres and joules
  • explain why sliding against friction makes things warmer.

A force pulling at an angle to the motion is not AQA GCSE content.

When does a force do work?

A force does work on an object when the object moves along the line the force acts in. If the object does not move along that line, the force does no work, however big it is. The work done tells you how many joules have moved from one store to another.

The equation

W=FsW = Fs

Here WW is the work done in joules (J), FF is the force in newtons (N) and ss is the distance moved along the line of action of the force, in metres (m). AQA also uses WW for weight in W=mgW = mg, so check which one a question means.

Worked example 1: pushing a car. Two friends push a broken-down car 25 m along a level street, with a steady combined force of 480 N in the direction the car moves.

Given: F=480F = 480 N, s=25s = 25 m. Equation: W=FsW = Fs. Substitution: W=480×25W = 480 \times 25. Answer: W=12 000W = 12\,000 J, which is 12 kJ.

Worked example 2: rearranging. A winch hauls a dinghy up a slipway with a force of 1.5 kN along the slope, doing 3.6 kJ of work. How far does the dinghy move?

Given: F=1.5F = 1.5 kN =1500= 1500 N, W=3.6W = 3.6 kJ =3600= 3600 J. Equation: rearrange to s=WFs = \dfrac{W}{F}. Substitution: s=36001500s = \dfrac{3600}{1500}. Answer: s=2.4s = 2.4 m.

Joules and newton-metres

A force of 1 N moving an object 1 m along its own line does 1 J of work. So 1 J = 1 N m, and 350 N m is simply 350 J. Watch the prefixes: kilonewtons multiplied by metres give kilojoules, and centimetres must become metres first. A 0.75 kN push through 40 cm does 750×0.40=300750 \times 0.40 = 300 J.

Where the energy goes

  • Lifting at a steady speed. The upward force equals the weight, so the work done is weight × height. It fills the gravitational potential store, matching Ep=mghE_p = mgh.
  • Speeding something up on a smooth surface fills its kinetic store.
  • Sliding against friction at a steady speed. Nothing rises or speeds up, so the energy ends up in the thermal stores of both rubbing surfaces, and their temperature rises.

Bicycle brakes rely on this: friction between the pads and the wheel does work, the kinetic store of the rider and bike empties, and the pads get hot.

No movement, no work

Someone straining against a brick wall does no work on it, because the wall moves 0 m. A waiter carrying a tray at a constant height does no work on it with the upward force: the tray travels sideways, so it moves 0 m along that force's line. Arms still ache, as muscles transfer energy from their chemical store and warm up, but none reaches the wall or the tray.

Using the simulation

In the simulation above, Push a crate across a floor loads first, with Push on the crate at 150 N and Distance moved at 4 m. The Work done card reads 600 J. Press Play, or End beside it, and the energy bar fills until all 600 J sits in the thermal store of the crate and the floor. Choose the Area under the graph tool and drag across the first 2 m of the force–distance graph: it reads close to 300 J, half the total. That rectangle just pictures F×sF \times s; the AQA specification does not ask for this graph method.

Pick Lift a box with a crane from the Situation list. The Force card shows 196 N, the weight of the 20 kg box, and with Height lifted at 4 m the work done is 784 J. Predict the value for 8 m, then move the slider: the card shows 1570 J, which is 1568 J rounded to 3 s.f.

Finally, Push against a wall and Carry a bag across a floor both give 0 J. The sledge's Rope at an angle (advanced) option goes beyond AQA, as its note says.

Equations

  • Work done

    Learn this

    W=Fs

    work done = force × distance (along the line of action of the force)

    Open calculator →

Common mistakes

  • Multiplying the mass by the height when a load is lifted. W = Fs needs a force in newtons, so find the weight first (mass × g) and multiply that by the height.
  • Leaving kN, kJ or cm unconverted. Turn 2.5 kN into 2500 N and 60 cm into 0.60 m before substituting, or say clearly that kN × m gives kJ.
  • Saying work is done on a wall that someone pushes, or on a box held still. If the object moves no distance along the force, the work done on it is zero.
  • Using the whole distance walked when a load is carried at a constant height. The upward force is at right angles to the motion, so it does no work on the load.
  • Mixing up the two meanings of W. In W = mg it is weight, in newtons; in W = Fs it is work done, in joules.
  • Writing that friction 'uses up' or 'destroys' energy. Work done against friction transfers energy to the thermal stores of the surfaces, so their temperature rises.

Exam-style questions

Original questions written in the style of GCSE AQA. Try each one before you reveal the answer.

  1. 1.A removal worker pushes a wardrobe 3.5 m across a carpeted floor at a steady speed. The worker's push is horizontal and has a size of 220 N.

    1. (a)Write down the equation that links distance, force and work done.

      1 mark
      Show the answer

      Answer: work done = force × distance (W = F s)

      Marking points

      • work done = force × distance (moved along the line of action of the force)
    2. (b)Calculate the work done by the worker.

      2 marks
      Show the answer

      Answer: W = 220 × 3.5 = 770 J

      Marking points

      • W = 220 × 3.5
      • W = 770 J
    3. (c)Describe what happens to the energy transferred by the worker as the wardrobe slides.

      2 marks
      Show the answer

      Answer: Work is done against friction between the wardrobe and the carpet. Energy goes to the thermal stores of the wardrobe and carpet, so their temperature rises slightly.

      Marking points

      • Work is done against friction (between the wardrobe and the carpet).
      • The thermal store of the wardrobe and carpet increases, so their temperature rises (energy is dissipated to the surroundings).
    4. (d)The wardrobe then jams against a wall. The worker pushes on it with a force of 300 N but it does not move. State the work done on the wardrobe. Give a reason for your answer.

      2 marks
      Show the answer

      Answer: 0 J, because the wardrobe does not move, so the distance moved along the line of the force is zero.

      Marking points

      • 0 J
      • The wardrobe moves no distance (in the direction of the force), so W = 300 × 0.
  2. 2.A tractor drags a fallen tree trunk in a straight line across a field. The chain pulls on the trunk with a force of 4.5 kN, in the direction the trunk moves. The tractor does 54 kJ of work on the trunk.

    1. (a)Calculate the distance the trunk moves.

      3 marks
      Show the answer

      Answer: s = W ÷ F = 54 000 ÷ 4500 = 12 m

      Marking points

      • Converting units: 54 000 J and 4500 N (or using kJ ÷ kN throughout)
      • s = 54 000 ÷ 4500
      • s = 12 m
    2. (b)Give the work done on the trunk in newton-metres.

      1 mark
      Show the answer

      Answer: 54 000 N m

      Marking points

      • 54 000 N m (accept 54 kN m)
    3. (c)Afterwards, the farmer notices that the underside of the trunk feels warm. Explain why.

      2 marks
      Show the answer

      Answer: Work is done against friction between the trunk and the ground. This transfers energy to the thermal store of the trunk, so its temperature rises.

      Marking points

      • Work is done against friction between the trunk and the ground.
      • Energy is transferred to the thermal store of the trunk, so its temperature increases.
  3. 3.A warehouse robot lifts a parcel of mass 5.0 kg straight up through 1.6 m at a steady speed. Gravitational field strength = 9.8 N/kg.

    1. (a)Calculate the weight of the parcel.

      2 marks
      Show the answer

      Answer: W = m g = 5.0 × 9.8 = 49 N

      Marking points

      • W = 5.0 × 9.8
      • W = 49 N
    2. (b)Calculate the work done by the robot on the parcel during the lift.

      2 marks
      Show the answer

      Answer: work done = force × distance = 49 × 1.6 = 78.4 J

      Marking points

      • work done = 49 × 1.6 (allow their weight from the part above)
      • = 78.4 J (accept 78 J)
    3. (c)Name the energy store of the parcel that increases during the lift.

      1 mark
      Show the answer

      Answer: Gravitational potential energy store

      Marking points

      • Gravitational potential (energy store)
    4. (d)The robot then carries the parcel 15 m across the level floor, keeping it at the same height. A student says that the robot's upward force on the parcel does 49 × 15 = 735 J of work. Explain why the student is wrong.

      2 marks
      Show the answer

      Answer: The upward force acts at right angles to the motion: the parcel moves sideways and does not rise. It moves no distance along the line of action of the upward force, so the upward force does no work (0 J).

      Marking points

      • The parcel moves at right angles to the upward force (its height does not change), so it moves zero distance along the line of action of that force.
      • So the work done by the upward force is zero.
  4. 4.A cyclist is riding along a level road. The kinetic energy of the cyclist and bicycle is 2400 J. The cyclist brakes and comes to a stop in a distance of 12 m. Assume that all of the kinetic energy is transferred by the work done by the braking force.

    1. (a)Calculate the average braking force.

      3 marks
      Show the answer

      Answer: Work done = 2400 J. F = W ÷ s = 2400 ÷ 12 = 200 N.

      Marking points

      • Work done by the braking force = 2400 J
      • F = 2400 ÷ 12
      • F = 200 N
    2. (b)Explain why the brakes become hot.

      2 marks
      Show the answer

      Answer: Friction between the brake pads and the wheel does work. This transfers energy from the kinetic store to the thermal store of the brakes, so their temperature increases.

      Marking points

      • Work is done by friction between the brake pads and the wheel.
      • Energy is transferred to the thermal store of the brakes, so their temperature increases.
    3. (c)On another day the cyclist brakes from the same speed with an average braking force of 300 N. Calculate the new stopping distance.

      2 marks
      Show the answer

      Answer: s = W ÷ F = 2400 ÷ 300 = 8.0 m

      Marking points

      • s = 2400 ÷ 300
      • s = 8.0 m

Quick check

6 questions

  1. 1.A force of 1 N pushes an object 1 m along the line of the force. How much work is done?
  2. 2.A forklift drags a pallet 6.0 m with a force of 2.5 kN along the direction of motion. How much work does it do?
  3. 3.In which of these is no work done on the object named?
  4. 4.A force of 40 N does 300 J of work on a box. How far does the box move along the line of the force?
  5. 5.A block of wood is sanded quickly. The wood and the sandpaper get warm. Which statement explains this?
  6. 6.In the equation W = Fs, what does s stand for?