Work in physics
In everyday speech, "work" means almost any effort, even standing in a queue. Physics is stricter. A force does work only when it acts on a body and the body moves in the direction of that force.
Work is the product of a force and the distance through which it moves a body in its own direction:
Here is the force in newtons and is the distance moved along the force, in metres. Your book usually writes weight as a small ; on this page, capital always means work.
Unit of work
The SI unit of work is the joule (J). A force of one newton that moves a body one metre along its own direction does one joule of work:
Bigger amounts are given in kilojoules () and megajoules ().
Work is a scalar quantity. It has size only. The same force moving a body the same distance does the same work whichever way the body travels, so work has no direction. A force that does work on a body transfers energy to it, and the work done equals the energy transferred.
A force at an angle
A rope tied to a cart usually slopes upwards, so only part of the pull acts along the road. If the force makes an angle with the direction of motion, resolve it into along the motion and at right angles to it. Only the component along the motion does work:
- At , and : the most work that force can do over that distance.
- At , and .
When is no work done?
- The body does not move (). People push hard on a truck stuck in mud, but it does not move at all, so they do no work on it.
- There is no force (). A space probe coasting at steady velocity far from any planet needs no force, so no work is done on it.
- The force acts at 90° to the motion. A porter walks along a level railway platform with a suitcase balanced on their head. The supporting force is upward, but the case travels sideways and never rises, so that force does no work on it.
Feeling tired is the muscles using chemical energy, not work done on the load.
Work from a force–distance graph
Put distance on the horizontal axis and the force along the motion on the vertical axis. A constant force plots as a horizontal line; the rectangle beneath it measures . So the area under a force–distance graph is the work done. If the force changes in steps, add the area of each strip.
Worked numerical 1: pulling a handcart
A fruit seller pulls a loaded handcart 25 m along a level road. The rope is at 60° to the road and the pull in it is 80 N. Find the work done by the pull.
Data: , , ,
Worked numerical 2: loading a truck
A labourer lifts a 25 kg bag of cement at a steady speed from the ground onto a truck bed 1.2 m high. Find the work done. Take .
The bag rises steadily, so the upward force on it equals its weight, and force and motion are both upwards ():
Exploring the simulation: crate, sledge, crane
In the simulation above, the first situation is Push a crate across a floor, with a 150 N push over 4 m. Press Play, or press End to see the finished run at once. The Work done card reads 600 J, which the working confirms as , and the shaded area under the Force–distance graph is also 600 J.
- From Situation, choose Pull a sledge with a rope, then switch on Rope at an angle. The rope starts at 30°, so only 130 N of the 150 N pull acts along the snow and the work done drops to 520 J. Drag Rope angle above the ground to 60°: the work falls to 300 J because .
- Pick Lift a box with a crane. With g = 10 N/kg, the 20 kg box needs a 200 N cable force, so raising it 4 m takes 800 J.
- Now try Carry a bag across a floor: the hand pushes up with 80.0 N at 90° to the motion, and the work done is 0 J. Push against a wall gives 0 J too, since the wall never moves.