What this topic covers
Pushing, pulling and lifting all move energy from one store to another. Work done tells you how much energy has moved, in joules.
When is work done? (Core)
Mechanical work is done whenever a force makes something move along the direction in which that force acts. A tug towing a barge does work.
An electric current can do work too. When a battery drives a current through a fan motor, it does electrical work, and energy leaves the battery's chemical store.
Both kinds follow one rule: work done equals energy transferred. Doing 500 J of work shifts exactly 500 J between stores.
The equation (Core)
- : work done, in joules (J)
- : force, in newtons (N)
- : distance moved in the direction of the force, in metres (m)
- : energy transferred, in joules (J)
You need to remember this equation. A 1 N force that shifts its load 1 m in its own direction transfers 1 J, which is why 1 J = 1 N m. Bigger jobs use kilojoules (1 kJ = 1000 J) and megajoules (1 MJ = 1 000 000 J).
Watch the letters. Cambridge also uses for weight, in . When one answer needs both, write the word "weight".
Forces that do no work (Core)
The distance must be along the force, so two familiar cases give zero:
- Nothing moves. A weightlifter holding a barbell steady overhead does no work on it, because .
- The motion is at right angles to the force. A waiter's hand pushes up on a tray that is carried level through a restaurant. The tray rises by 0 m, so the upward force does no work on it.
Aching arms are not a sign of work done on the object: the muscles draw on the body's chemical store and warm the body.
When work is done, ask where the energy went. Work against friction adds energy to the internal (thermal) stores of the rubbing surfaces, lifting adds energy to a gravitational potential store, and speeding up adds energy to a kinetic store.
Worked example 1: a market handcart (Core)
A trader in Nairobi pushes a handcart 25 m along a level road with a steady 120 N force in the direction of motion, at constant speed. Find the work done and say where the energy goes.
Answer: 3000 J, or 3.0 kJ. The speed never changes, so the kinetic store gains nothing. The energy warms the wheel bearings, the tyres and the air, ending up in their internal (thermal) stores.
Worked example 2: a winch on a building site (Core)
On a building site in Hanoi, a winch does 22 050 J of work raising a 150 kg bucket of cement at a steady speed. How high does the bucket rise? Take N/kg.
At a steady speed the cable pulls up with a force equal to the bucket's weight:
Answer: 15 m. The 22 050 J is now in the bucket's gravitational potential store. Supplement candidates can confirm it with J.
Simulation tasks
In the simulation above, the crate is pushed with 150 N over 4 m (Push on the crate, Distance moved). The Work done card shows the whole run's total, 600 J, before anything moves.
- (Core) Press Play. When the crate stops, all 600 J is in the internal (thermal) store of crate and floor, and Where the energy goes says the kinetic store is unchanged.
- (Core) Drag Push on the crate to 300 N. The work done doubles to 1200 J.
- (Core) Choose Lift a box with a crane. The Force card gives the 20 kg box's weight, 196 N, and lifting it 4 m takes 784 J. Predict the work for 5 m, then set Height lifted to check: 980 J.
- (Core) Choose Carry a bag across a floor. The upward force is 78.4 N, yet Work done reads 0 J: the bag moves at 90° to that force.
- (Core) Choose Push against a wall, drag Push on the wall to 400 N and press Play. The work done stays at 0 J.
Leave Rope at an angle (advanced), in the sledge situation, switched off: it is beyond Cambridge IGCSE.