Skip to content

GCSE Physics — AQA · Forces

Moments, levers and gears

4.5.4Physics only

A moment is the turning effect of a force: M = Fd, where d is the perpendicular distance from the pivot (recall it). When an object balances, its clockwise moments add up to the same total as its anticlockwise moments. Levers and gears pass turning effects on. GCSE Physics only, on both tiers.

Loading simulation…

Symbols match your course. Open the full principle of moments simulation for more presets and teacher tools.

What AQA asks for (spec 4.5.4)

This whole topic is GCSE Physics only (not Combined Science) and appears on both tiers. You should be able to:

  • describe examples of forces making things turn
  • recall and use M=FdM = Fd
  • use the principle of moments to find a force or distance on a balanced object
  • explain how levers and gears pass a turning effect on.

M=FdM = Fd is not on the equation sheet, so you must remember it.

Forces that make things turn

Push a heavy door near its handle and it swings open; push equally hard beside the hinges and it hardly moves. The hinges are the pivot. The size of a force's turning effect about a pivot is its moment.

M=FdM = Fd

MM is the moment in newton-metres (N m) and FF is the force in newtons (N). dd is the perpendicular distance in metres from the pivot to the line of action of the force: the line the force acts along, extended if necessary. A larger force, or a force further from the pivot, gives a larger moment.

Worked example 1: a stiff wheel nut. A driver changing a tyre pushes at right angles on a wheel brace with 120 N, 35 cm from the centre of the nut.

Given: F=120F = 120 N, d=35d = 35 cm =0.35= 0.35 m. Equation: M=FdM = Fd. Substitution: M=120×0.35M = 120 \times 0.35. Answer: M=42M = 42 N m.

The principle of moments

For a balanced object:

total clockwise moment = total anticlockwise moment

Take both totals about the same pivot, adding every moment on each side.

Worked example 2: a playground see-saw. The plank is uniform and rests on its middle, so its own weight has no moment. A child of weight 320 N sits 1.5 m left of the pivot. How far to the right must a friend of weight 400 N sit for the see-saw to balance?

Given: anticlockwise, 320 N at 1.5 m; clockwise, 400 N at distance dd. Equation: total clockwise moment = total anticlockwise moment, with M=FdM = Fd for each child. Substitution: 400×d=320×1.5=480400 \times d = 320 \times 1.5 = 480, so d=480400d = \dfrac{480}{400}. Answer: d=1.2d = 1.2 m right of the pivot.

Levers

A lever is a rigid bar that turns about a pivot. To make a small effort lift a large load, the effort is applied far from the pivot and the load sits close to it. The bar passes the effort's moment on to the load. The load's distance is short, so an equal moment means a large force.

A paving slab presses on a builder's bar with 600 N, 0.10 m from the pivot, and the builder pushes 1.5 m from it. The effort needed is only 600×0.10÷1.5=40600 \times 0.10 \div 1.5 = 40 N, but the builder's hand moves 15 times as far as the slab rises. Wheelbarrows and bottle openers work the same way.

Gears

Gears are toothed wheels that lock together. The driving gear's teeth push on the driven gear's teeth, and the two push on each other with equal-sized forces. The moment on each gear is that force multiplied by its own radius.

  • A larger driven gear receives a bigger moment but turns more slowly.
  • A smaller driven gear receives a smaller moment and spins faster.
  • Gears in mesh turn in opposite directions.

A 12-tooth gear driving a 36-tooth gear with same-sized teeth gives the big gear three times the radius, so three times the moment and one turn for every three of the small gear. A bicycle's low gear uses a big rear sprocket this way for climbing hills. (A bicycle's sprockets are linked by a chain, so they turn the same way; two gears whose teeth mesh directly turn opposite ways.)

Using the simulation

In the simulation above, Two weights in balance is loaded first, with the metre rule pivoted at 50 cm and held level on pegs. The readouts show A: 3 N × 0.20 m = 0.600 N m anticlockwise and B: 2 N × 0.30 m = 0.600 N m clockwise. Press Release, below the stage: the rule stays level and the status says Balanced. Drag B to the 85 cm mark and the clockwise total becomes 0.700 N m, so the right end tips down. Level holds the rule again.

Next choose See-saw with two children, predict which end drops and press Release. With g = 9.8 N/kg, child A gives 274.4 N × 1.5 m = 411.6 N m, beating child B's 343 N × 1.0 m = 343.0 N m, so the lighter child goes down. Select B and slide it to 3.2 m along the plank, which is 1.2 m right of the pivot, and the see-saw balances.

Finally, in Find an unknown weight, slide the 3 N weight until the status reads Balanced, find the weight marked ?, then press Reveal to compare.

Equations

  • Moment of a force

    Learn this · Physics only

    M=Fd

    moment of a force = force × perpendicular distance from the pivot

    Open calculator →

Common mistakes

  • Using the distance along a bar when the force pushes at an angle. The distance in M = Fd is the perpendicular distance from the pivot to the line of action of the force.
  • Leaving distances in centimetres. Change them to metres so that the moment comes out in N m.
  • Giving N/m or J as the unit. Moments are measured in newton-metres (N m).
  • Putting a mass into M = Fd as if it were a force. Find the weight first with W = mg, using g = 9.8 N/kg.
  • With several forces on one side of a pivot, comparing single moments. Add up every clockwise moment and every anticlockwise moment, then set the two totals equal.
  • Saying that a big gear turned by a small gear spins faster. It turns more slowly, but the moment on it is bigger.

Exam-style questions

Original questions written in the style of GCSE AQA. Try each one before you reveal the answer.

  1. 1.A student opens a heavy fire door by pushing on it at right angles to its surface. The hinges of the door act as a pivot.

    1. (a)State what is meant by the moment of a force.

      1 mark
      Show the answer

      Answer: The turning effect of the force (about a pivot).

      Marking points

      • The turning effect of a force about a pivot.
    2. (b)The student pushes with a force of 25 N, 0.80 m from the hinges. Calculate the moment of this force about the hinges. Give the unit.

      3 marks
      Show the answer

      Answer: M = 25 × 0.80 = 20 N m

      Marking points

      • M = 25 × 0.80
      • 20
      • N m (newton-metres)
    3. (c)A second student pushes the door at right angles, but only 0.40 m from the hinges. Explain why this student must push harder to produce the same moment.

      2 marks
      Show the answer

      Answer: The perpendicular distance from the pivot is smaller (half as much), so the force must be bigger (twice as big, 50 N) to give the same moment.

      Marking points

      • The perpendicular distance from the pivot (hinges) is smaller.
      • Moment = force × distance, so a larger force (50 N) is needed for a moment of 20 N m.
  2. 2.A uniform metre rule is balanced on a pivot at its 50 cm mark, with its 0 cm end on the left. A 4.0 N weight hangs from the 10 cm mark and a 2.0 N weight hangs from the 30 cm mark. A third weight, W, hangs from the 75 cm mark so that the rule stays balanced.

    1. (a)Calculate the sum of the anticlockwise moments about the pivot.

      3 marks
      Show the answer

      Answer: 4.0 × 0.40 = 1.6 N m; 2.0 × 0.20 = 0.40 N m; total = 2.0 N m

      Marking points

      • Distances from the pivot of 0.40 m and 0.20 m used.
      • Moments of 1.6 N m and 0.40 N m.
      • Total anticlockwise moment = 2.0 N m
    2. (b)Use the principle of moments to calculate the weight W.

      3 marks
      Show the answer

      Answer: Clockwise moment = anticlockwise moment, so W × 0.25 = 2.0 and W = 8.0 N.

      Marking points

      • W × 0.25 = 2.0 (total clockwise moment = total anticlockwise moment).
      • W = 2.0 ÷ 0.25
      • W = 8.0 N
    3. (c)Explain why the weight of the metre rule was not included in your calculations.

      2 marks
      Show the answer

      Answer: The rule is uniform, so its weight acts at its centre of mass, the 50 cm mark. That is at the pivot, so the perpendicular distance is zero and the weight has no moment.

      Marking points

      • The weight of the rule acts at its centre of mass (the 50 cm mark), which is at the pivot.
      • So its perpendicular distance from the pivot is zero and its moment is zero.
  3. 3.A builder uses a long steel bar as a lever to lift the edge of a heavy stone. The bar rests on a brick, which acts as the pivot. The stone pushes down on the short end of the bar with a force of 960 N, 0.15 m from the pivot. The builder pushes down on the long end, 1.20 m from the pivot. Ignore the weight of the bar.

    1. (a)Calculate the force the builder must apply at right angles to the bar to balance the force from the stone.

      3 marks
      Show the answer

      Answer: Moment of stone = 960 × 0.15 = 144 N m; F × 1.20 = 144, so F = 120 N.

      Marking points

      • Moment from the stone = 960 × 0.15 = 144 N m
      • F × 1.20 = 144 (clockwise moment = anticlockwise moment)
      • F = 120 N
    2. (b)Explain how the lever lets the builder lift the stone with a much smaller force than the force from the stone.

      2 marks
      Show the answer

      Answer: The builder pushes much further from the pivot than the stone is, so a small force produces a moment as large as the stone's moment.

      Marking points

      • The effort acts much further from the pivot than the load.
      • So a smaller force produces an equal moment (moment = force × distance).
    3. (c)The builder now pushes on the same point but at an angle to the bar instead of at right angles. Explain why a larger force is needed.

      2 marks
      Show the answer

      Answer: The perpendicular distance from the pivot to the line of action of the force is now less than 1.20 m, so a larger force is needed to give the same moment of 144 N m.

      Marking points

      • The perpendicular distance from the pivot to the line of action of the force is smaller.
      • So a larger force is needed to produce the same moment.
  4. 4.In a model crane, an electric motor turns a small gear with 12 teeth and a radius of 1.0 cm. The small gear meshes with a large gear that has 48 teeth and a radius of 4.0 cm. The large gear turns the drum that winds in the cable.

    1. (a)The small gear turns clockwise. State the direction in which the large gear turns.

      1 mark
      Show the answer

      Answer: Anticlockwise.

      Marking points

      • Anticlockwise (the opposite direction to the small gear).
    2. (b)The motor produces a moment of 0.30 N m on the small gear. Calculate the force between the teeth of the two gears.

      2 marks
      Show the answer

      Answer: F = M ÷ d = 0.30 ÷ 0.010 = 30 N

      Marking points

      • F = 0.30 ÷ 0.010 (radius changed to 0.010 m)
      • F = 30 N
    3. (c)Calculate the moment on the large gear.

      2 marks
      Show the answer

      Answer: M = 30 × 0.040 = 1.2 N m

      Marking points

      • M = 30 × 0.040
      • M = 1.2 N m
    4. (d)Explain why the moment on the large gear is bigger than the moment on the small gear.

      3 marks
      Show the answer

      Answer: Where the teeth meet, the two gears push on each other with forces of equal size. The moment on each gear is this force × its radius, and the large gear has the bigger radius, so its moment is bigger.

      Marking points

      • The forces between the teeth of the two gears are equal in size.
      • The moment on each gear is this force × its radius (perpendicular distance from its axle).
      • The large gear has a bigger radius, so the moment on it is bigger.

Quick check

6 questions

  1. 1.A force of 15 N acts at right angles to a bar, 0.40 m from the pivot. What is the moment of the force?
  2. 2.Which distance is used when calculating the moment of a force?
  3. 3.A beam on a pivot is balanced. Which statement must be true?
  4. 4.A person of weight 600 N sits 0.90 m from the pivot of a see-saw. A second person sits 1.20 m from the pivot on the other side, and the see-saw balances. What is the weight of the second person?
  5. 5.A small gear drives a larger gear that meshes with it. Compared with the small gear, how does the larger gear turn?
  6. 6.Why is a tight nut easier to undo with a long spanner than with a short one?