Clockwise and anticlockwise moments
Any force that can turn a body about an axis has a moment, or torque, . Here , the moment arm, is how far the force's line of action lies from the axis, measured at right angles. Each moment has a sense of turning:
- a clockwise moment tends to turn the body the same way as the hands of a clock;
- an anticlockwise moment tends to turn it the opposite way.
Your textbook takes anticlockwise torque as positive and clockwise torque as negative. For balance problems it is easier to list the two kinds in separate columns and compare the column totals.
The principle of moments
Principle of moments: if a body is in equilibrium (balanced), then about any point you choose, the sum of the anticlockwise moments equals the sum of the clockwise moments.
For one weight on each side of a pivot this becomes
With several weights, add up each side first:
This is the second condition of equilibrium, , in a form that is easy to use: with the textbook's signs, the positive and negative torques cancel. Punjab board papers come without an equation list, so memorise and practise rearranging it for any one quantity.
Checking the principle with a metre rule
- Rest a uniform metre rule on a wedge and slide it until it balances. The wedge is now under its centre of gravity, the 50 cm mark. The rule's own weight passes through the pivot, so it has no moment.
- Hang slotted masses from loops of thread, some on each side. Move one loop until the rule is level again.
- Read every distance from the wedge, not from the zero end of the scale, and convert it to metres. Change each mass to a weight using with .
- Work out each moment, then total the clockwise and the anticlockwise columns. The totals agree, apart from small reading errors.
Worked numerical 1: three weights on a metre rule
A uniform metre rule balances on a wedge at its 50 cm mark. A 5 N weight hangs at the 20 cm mark and a 2 N weight at the 35 cm mark. Find the weight that must hang at the 90 cm mark to keep it level.
Data: , ; , ; ;
Both known weights are left of the wedge, so their moments are anticlockwise. The unknown weight gives the only clockwise moment.
Worked numerical 2: a tower crane
A tower crane on a building site in Islamabad holds a 2000 kg bundle of steel bars 15 m from its tower. A concrete counterweight sits 5 m from the tower on the opposite side. Ignoring the weight of the crane's arm, find the mass of counterweight needed for balance. Take .
The counterweight must be three times as heavy as the steel because its moment arm is one third as long.
Using the simulation
In the simulation above, the rule starts in Two weights in balance, held level on its pegs, and the stage shows Held level. Under the stage, the readouts put each moment in its own column: A gives 3 N × 0.20 m = 0.600 N m anticlockwise and B gives 2 N × 0.30 m = 0.600 N m clockwise. The rule's own 1 N weight acts through the pivot, so it adds nothing to either column. Press Release. The rule stays level and the badge changes to Balanced.
Next choose Two weights against one. Two weights now share the anticlockwise column. Check that 0.400 N m + 0.300 N m matches the single 0.700 N m on the clockwise side.
Then test yourself with Find an unknown weight. Press Release and watch the left end drop. Move B with the B: Position on the scale slider, or drag it, until the badge says Balanced. B's moment now equals the hidden weight's moment. Divide it by the hidden weight's distance from the pivot, then press Reveal to check your answer.