Skip to content

Cambridge International · Cambridge IGCSE

Cambridge IGCSE Physics Specimen (for exams from 2023) Paper 6 (0625/06)

Set by Cambridge International for Cambridge IGCSE Physics, Specimen (for exams from 2023): 1 hour and 40 marks, on Energy, work and power, Thermal physics, Transfer of thermal energy, Light and the electromagnetic spectrum, Electrical quantities, Electric circuits and electrical safety. The paper itself is on Cambridge International’s website; this page adds what it covers, how to use it and original practice questions on the same topics.

Paper facts

Series
Specimen (for exams from 2023)
Paper
Paper 6
Code
0625/06
Tier
Not tiered
Time
1 hour
Marks
40
Calculator
Allowed
Syllabus
0625 (2023–2025 syllabus)
Links checked
17 November 2026

Official files

These files belong to Cambridge International. Labverse links to them and never hosts or copies them. Labverse is not affiliated with Cambridge International.

What this paper covers

6 topic groups from our map of Cambridge IGCSE Physics (0625). Revise each one with its topic pages and simulations before you sit the paper.

How to use this paper

  1. 1. Time it. Set 1 hour for 40 marks: about 90 seconds a mark. At 30 minutes you should be roughly halfway through the marks; if you’re well behind, speed up on the short questions.
  2. 2. Sit it in one go. Open the question paper on Cambridge International’s website (the link above) and work on paper, with no notes.
  3. 3. Mark it with the official scheme. Give a mark only when your answer matches a marking point. Be strict with yourself: it’s the gaps you find that improve your grade.
  4. 4. Learn from the marks you lost. For every lost mark, note whether it was knowledge, method, reading the question or time.
  5. 5. Log mistakes by topic. Keep one line per topic group (Energy, work and power, Thermal physics, Transfer of thermal energy, Light and the electromagnetic spectrum, Electrical quantities, Electric circuits and electrical safety) and add a tally each time a mark goes there.
  6. 6. Revisit, then redo. Work through the weakest group’s topic pages and simulations, try the questions below, and come back to the paper in a week.

Practise the same topics

6 original exam-style questions on this paper’s topics, written in the style of Cambridge IGCSE (not taken from the paper). Try each one before you reveal the answer.

  1. 1.A to-scale Sankey diagram is drawn for a petrol engine. The input arrow is 50 mm wide and represents 2000 kJ of energy from the fuel. The useful arrow, for the work done turning the wheels, is 12.5 mm wide.

    From the topic: Efficiency

    1. (a)(Supplement) Calculate the energy represented by the useful arrow.

      2 marks
      Show the answer

      Answer: 12.5 ÷ 50 = 0.25, and 0.25 × 2000 = 500 kJ

      Marking points

      • 12.5 ÷ 50 or 0.25 seen
      • 500 kJ
    2. (b)(Supplement) Calculate the efficiency of the engine.

      1 mark
      Show the answer

      Answer: 500 ÷ 2000 × 100% = 25%

      Marking points

      • 25% (0.25)
    3. (c)(Supplement) The rest of the input is shown by a single wasted arrow. State its width and the energy it represents.

      2 marks
      Show the answer

      Answer: 50 − 12.5 = 37.5 mm, representing 2000 − 500 = 1500 kJ.

      Marking points

      • 37.5 mm
      • 1500 kJ
  2. 2.A student heats 0.200 kg of cooking oil in an insulated cup. A joulemeter shows that 12 000 J is supplied, and the temperature of the oil rises from 20.0 °C to 50.0 °C.

    From the topic: Specific heat capacity

    1. (a)(Supplement) Calculate the specific heat capacity of the cooking oil.

      3 marks
      Show the answer

      Answer: Δθ = 30.0 °C, so c = 12 000 ÷ (0.200 × 30.0) = 2000 J/(kg °C)

      Marking points

      • Δθ = 30.0 °C
      • 12 000 ÷ (0.200 × 30.0) seen
      • 2000 J/(kg °C)
    2. (b)(Supplement) State why the student stirs the oil during the experiment.

      1 mark
      Show the answer

      Answer: So that the oil is at the same temperature throughout and the thermometer reading is representative.

      Marking points

      • to keep the temperature even throughout the oil
    3. (c)(Supplement) The same energy is supplied to 0.200 kg of water, of specific heat capacity 4200 J/(kg °C). Calculate the temperature rise of the water.

      2 marks
      Show the answer

      Answer: Δθ = ΔE ÷ (mc) = 12 000 ÷ (0.200 × 4200) = 14.3 °C

      Marking points

      • 12 000 ÷ (0.200 × 4200) seen
      • 14.3 °C
  3. 3.After crossing about 150 million km of space, where there are almost no particles, energy from the Sun arrives at the Earth.

    From the topic: Thermal radiation

    1. (a)Name the part of the electromagnetic spectrum that transfers thermal energy by radiation.

      1 mark
      Show the answer

      Answer: Infrared

      Marking points

      • infrared
    2. (b)Explain why this energy cannot reach the Earth by conduction or by convection.

      2 marks
      Show the answer

      Answer: Space is almost a vacuum, with hardly any particles. Conduction and convection both need particles (a medium), but radiation does not.

      Marking points

      • space is (almost) a vacuum / has (almost) no particles
      • conduction and convection need a medium (particles); radiation does not
    3. (c)Name two things that can happen to infrared radiation when it reaches the surface of an object.

      2 marks
      Show the answer

      Answer: It can be absorbed, and it can be reflected.

      Marking points

      • one from: absorbed; reflected; transmitted (passes through)
      • a second, different one from the same list
    4. (d)State the effect on a surface of absorbing infrared radiation.

      1 mark
      Show the answer

      Answer: The temperature of the surface rises.

      Marking points

      • it warms up / its temperature increases
  4. 4.An optician's consulting room in Lahore is 3.5 m long. A letter chart is fixed to the back wall, behind and above the patient's head, and a plane mirror covers part of the front wall. The patient's eyes are 1.0 m in front of the back wall and look into the mirror. Ignore any difference in height.

    From the topic: Reflection of light

    1. (a)(Supplement) Calculate how far the patient's eyes are from the image of the chart.

      3 marks
      Show the answer

      Answer: The chart's image is 3.5 m behind the mirror. The eyes are 3.5 − 1.0 = 2.5 m from the mirror. Distance = 2.5 m + 3.5 m = 6.0 m.

      Marking points

      • image of the chart is 3.5 m behind the mirror
      • eyes are 2.5 m from the mirror
      • 6.0 m
    2. (b)Suggest why the optician uses a mirror instead of fixing the chart to the front wall.

      1 mark
      Show the answer

      Answer: The image of the chart is further from the patient than the length of the room, so a small room can be used for a test that needs a long viewing distance.

      Marking points

      • chart appears further away than the room is long / gives a longer viewing distance in a small room
    3. (c)The patient leans slightly to one side. State whether the image of the chart moves, and explain your answer.

      2 marks
      Show the answer

      Answer: It does not move. The image's position is set by the chart and the mirror alone; moving the eyes only changes which reflected rays enter them.

      Marking points

      • the image does not move
      • its position depends only on the chart (object) and mirror / the eye only changes which reflected rays it receives
  5. 5.A student in Hanoi tests four materials: a copper wire, a polythene strip, a graphite pencil lead and a rubber band.

    From the topic: Electric charge

    1. (a)Describe an experiment to find out which of the materials are electrical conductors.

      3 marks
      Show the answer

      Answer: Connect a cell and a lamp (or an ammeter) in series with two leads, leaving a gap between the ends of the leads. Connect each material across the gap in turn. If the lamp lights or the ammeter shows a current, the material is a conductor; if not, it is an insulator.

      Marking points

      • series circuit containing a cell and a lamp (or ammeter), with a gap
      • each material connected across the gap in turn
      • lamp lights / current shown: conductor; no light / no current: insulator
    2. (b)State which two of the materials are conductors.

      2 marks
      Show the answer

      Answer: The copper wire and the graphite pencil lead.

      Marking points

      • copper
      • graphite
    3. (c)Explain, in terms of electrons, why copper conducts but polythene does not.

      2 marks
      Show the answer

      Answer: Copper contains free electrons that can move through it, so charge flows. In polythene each electron is held in its own atom, so no charge can flow.

      Marking points

      • copper has free electrons that can move (drift) through it
      • in polythene the electrons are held in their atoms / are not free to move
  6. 6.A student holds a copper rod in one hand and rubs it with a dry cloth. Tests show that the rod has not become charged.

    From the topic: Electric charge

    1. (a)Explain why the copper rod does not stay charged.

      2 marks
      Show the answer

      Answer: Copper is a conductor, so electrons can move through it. Charge flows through the rod and the student's body, which also conducts, to the ground instead of staying on the rod.

      Marking points

      • copper is a conductor (has free electrons)
      • charge (electrons) flows away through the rod and the student's hand/body (to the ground)
    2. (b)Suggest how the student could charge the copper rod by rubbing.

      1 mark
      Show the answer

      Answer: Hold it by an insulating handle, for example a plastic one, so that the charge cannot flow away through the hand.

      Marking points

      • hold it by an insulating (plastic) handle / do not touch the metal