Current means moving charge (Core)
An electric current is a flow of electric charge. When you switch on a torch, charge moves around the loop formed by the battery, the wires and the lamp. The more charge that passes each second, the bigger the current. Current is measured in amperes (A), often shortened to amps. Charge is measured in coulombs (C).
Small currents are often given in milliamperes: 1 mA = 0.001 A, so 250 mA is 0.25 A.
How metals conduct (Core)
In a metal, some electrons are not tied to any single atom. These free electrons wander through the metal all the time. When a cell is connected across a wire, they drift together along it. That drift is the current in the wire. (Supplement: the electrons drift from the negative terminal of the cell, through the circuit, to the positive terminal, which is the opposite way to the conventional current.)
Insulators such as plastic and rubber have almost no free electrons, so charge cannot flow through them. That is why wires are coated in plastic.
Measuring current with an ammeter (Core)
An ammeter measures current. It goes in series, so that all of the current you want to measure passes through it. A good ammeter has a very small resistance, so adding it barely changes the current.
Cambridge expects you to describe both kinds of meter:
- An analogue ammeter has a needle moving over a scale. Before using it, check that the needle sits on zero. Read it with your eye directly in front of the needle to avoid parallax.
- A digital ammeter shows a number. Note how many decimal places it displays, because that limits how precise the reading can be.
Many ammeters have different ranges, for example 0–100 mA, 0–1 A and 0–10 A. If you do not know the size of the current, start on the largest range so the meter is not overloaded. Then switch down to the smallest range that still keeps the reading on the scale. A smaller range spreads the reading over more of the dial, so you can read it more precisely.
Direct and alternating current (Core)
Direct current (d.c.) flows in one direction only. Cells, batteries and solar cells supply d.c.
Alternating current (a.c.) keeps reversing its direction, many times each second. Mains electricity is a.c. It goes through 50 complete cycles each second (a frequency of 50 Hz) in Pakistan, India and the UK, and 60 cycles each second (60 Hz) in the USA.
Worked example (Supplement)
A tablet charger delivers 1.8 A for 25 minutes. Calculate the charge that flows into the tablet battery.
Given: A, s.
Equation: rearrange to give .
Substitution:
Answer: 2700 C, or C.
Going the other way: if 720 C passes a point in 4.0 minutes, then A. Always change minutes into seconds first.
Watch the charge move in the simulation
In the simulation above, build a single loop with a cell, a lamp and an ammeter, then close the gaps with wire. The moving dots show the current. Place the ammeter on the other side of the lamp: its reading does not change, because the same charge flows through every part of a single loop.
Now, under Show, switch between Current (+ to −), which is conventional current, and Electrons. The dots reverse direction, but the ammeter reading stays exactly the same. Both pictures describe one current.