Skip to content

Cambridge International · Cambridge IGCSE

Cambridge IGCSE Physics Specimen (for exams from 2023) Paper 1 Core (0625/01)

Set by Cambridge International for Cambridge IGCSE Physics, Specimen (for exams from 2023): 45 minutes and 40 marks, on Motion, Forces, Energy, work and power, Thermal physics, Transfer of thermal energy, Waves and sound, Light and the electromagnetic spectrum, Electrical quantities, Electric circuits and electrical safety, Magnetism and electromagnetic effects, Nuclear physics, Space physics. The paper itself is on Cambridge International’s website; this page adds what it covers, how to use it and original practice questions on the same topics.

Paper facts

Series
Specimen (for exams from 2023)
Paper
Paper 1 Core
Code
0625/01
Tier
Core
Time
45 minutes
Marks
40
Calculator
Allowed
Syllabus
0625 (2023–2025 syllabus)
Links checked
17 November 2026

Official files

These files belong to Cambridge International. Labverse links to them and never hosts or copies them. Labverse is not affiliated with Cambridge International.

What this paper covers

12 topic groups from our map of Cambridge IGCSE Physics (0625). Revise each one with its topic pages and simulations before you sit the paper.

How to use this paper

  1. 1. Time it. Set 45 minutes for 40 marks: about 68 seconds a mark. At 23 minutes you should be roughly halfway through the marks; if you’re well behind, speed up on the short questions.
  2. 2. Sit it in one go. Open the question paper on Cambridge International’s website (the link above) and work on paper, with no notes.
  3. 3. Mark it with the official scheme. Give a mark only when your answer matches a marking point. Be strict with yourself: it’s the gaps you find that improve your grade.
  4. 4. Learn from the marks you lost. For every lost mark, note whether it was knowledge, method, reading the question or time.
  5. 5. Log mistakes by topic. Keep one line per topic group (Motion, Forces, Energy, work and power, Thermal physics, Transfer of thermal energy, Waves and sound, Light and the electromagnetic spectrum, Electrical quantities, Electric circuits and electrical safety, Magnetism and electromagnetic effects, Nuclear physics, Space physics) and add a tally each time a mark goes there.
  6. 6. Revisit, then redo. Work through the weakest group’s topic pages and simulations, try the questions below, and come back to the paper in a week.

Practise the same topics

8 original exam-style questions on this paper’s topics, written in the style of Cambridge IGCSE (not taken from the paper). Try each one before you reveal the answer.

  1. 1.A bus in Lagos travels between two stops on a busy road.

    From the topic: Speed and velocity

    1. (a)Define speed.

      1 mark
      Show the answer

      Answer: The distance moved in one unit of time (distance ÷ time).

      Marking points

      • distance travelled per unit time / distance divided by time taken
    2. (b)The bus covers 3.6 km in 6.0 minutes. Calculate its average speed in m/s.

      3 marks
      Show the answer

      Answer: 3600 m ÷ 360 s = 10 m/s

      Marking points

      • converts to 3600 m and 360 s
      • average speed = total distance ÷ total time, or 3600 ÷ 360
      • 10 m/s
    3. (c)Suggest why the highest speed of the bus during this trip is greater than its average speed.

      2 marks
      Show the answer

      Answer: The bus slows down or stops at junctions and stops, so at other times it must go faster than the average to cover the distance in the time.

      Marking points

      • bus slows down or is stationary for part of the time
      • so it must move faster than 10 m/s at other times to cover the same distance
  2. 2.To see how a steel spring's extension depends on its load, a student uses a clamp stand, the spring, a metre rule and a hanger with 100 g slotted masses.

    From the topic: Springs and load–extension graphs

    1. (a)Describe how the student obtains the readings needed to plot a load–extension graph.

      4 marks
      Show the answer

      Answer: Hang the spring from the clamp with the metre rule upright beside it. Measure the length (or pointer reading) with no load. Add the masses one at a time and measure the new length each time. Work out each extension as new length − original length, and each load as the weight of the masses.

      Marking points

      • measure the original (unloaded) length / initial pointer reading
      • add masses one at a time (increase the load in steps)
      • measure the new length / pointer reading after each addition
      • extension = new length − original length
    2. (b)Suggest one way to make the length readings more accurate.

      1 mark
      Show the answer

      Answer: Read the rule with the eye level with the pointer (to avoid parallax), or wait until the spring stops moving before reading.

      Marking points

      • eye level with the pointer / avoid parallax / wait until the spring is still / keep the rule vertical
    3. (c)State one safety precaution for this experiment.

      1 mark
      Show the answer

      Answer: Wear eye protection, or place a tray or soft mat under the masses.

      Marking points

      • eye protection / tray or mat under the masses / clamp the stand so it cannot topple
    4. (d)With no load, the spring is 3.6 cm long. With a load of 2.0 N, it is 8.6 cm long. Calculate the extension.

      1 mark
      Show the answer

      Answer: 8.6 − 3.6 = 5.0 cm

      Marking points

      • 5.0 cm
  3. 3.A goods lift raises a load of mass 480 kg through a vertical height of 35 m in 40 s, at a steady speed. Consider only the load. Take g as 9.8 N/kg.

    From the topic: Power

    1. (a)Calculate the load’s weight.

      2 marks
      Show the answer

      Answer: weight = mg = 480 × 9.8 = 4704 N

      Marking points

      • 480 × 9.8 seen
      • 4704 N
    2. (b)Calculate the work done on the load.

      2 marks
      Show the answer

      Answer: W = Fd = 4704 × 35 = 164 640 J (≈ 165 kJ)

      Marking points

      • 4704 × 35 seen
      • 164 640 J (165 kJ)
    3. (c)Calculate the useful power output of the lift motor.

      2 marks
      Show the answer

      Answer: P = W ÷ t = 164 640 ÷ 40 = 4116 W ≈ 4.12 kW

      Marking points

      • 164 640 ÷ 40 seen
      • 4116 W (4.12 kW)
  4. 4.A student blocks the nozzle of a syringe containing air and pushes the plunger in slowly. The air stays at room temperature throughout.

    From the topic: Gas pressure and volume

    1. (a)State what happens to the pressure of the air in the syringe.

      1 mark
      Show the answer

      Answer: The pressure increases.

      Marking points

      • increases
    2. (b)State what happens to the average speed of the air particles.

      1 mark
      Show the answer

      Answer: It stays the same, because the temperature does not change.

      Marking points

      • stays the same (unchanged)
    3. (c)Explain, in terms of particles, why the pressure changes.

      2 marks
      Show the answer

      Answer: The same particles now have a smaller space to move in, so they hit the walls of the syringe more often. There are more collisions with each part of the wall every second, so the pressure is greater.

      Marking points

      • smaller volume / particles have less space to move in
      • particles hit the walls more often (more collisions per second)
    4. (d)The student lets go and the plunger moves back out. State what happens to the pressure of the air.

      1 mark
      Show the answer

      Answer: It decreases.

      Marking points

      • decreases
  5. 5.A student uses a ripple tank. A vibrating straight bar sends plane waves towards a straight metal barrier, which is placed at an angle to the wavefronts.

    From the topic: Reflection, refraction and diffraction

    1. (a)State the name given to the construction line at 90° to the barrier where a wave meets it.

      1 mark
      Show the answer

      Answer: The normal.

      Marking points

      • normal
    2. (b)The waves arrive with an angle of incidence of 35°. State the angle of reflection.

      1 mark
      Show the answer

      Answer: 35°

      Marking points

      • 35°
    3. (c)State how the speed and the wavelength of the reflected waves compare with those of the incident waves.

      2 marks
      Show the answer

      Answer: Both are the same as for the incident waves.

      Marking points

      • speed unchanged
      • wavelength unchanged
    4. (d)The sides of the tank slope and are lined with foam. Suggest why.

      2 marks
      Show the answer

      Answer: The foam absorbs waves reaching the sides, so they do not reflect back across the tank and confuse the pattern.

      Marking points

      • absorbs the waves at the sides
      • so there are no reflections from the sides (which would spoil the pattern)
  6. 6.A radio station in Nairobi broadcasts at a frequency of 9.6 × 10⁷ Hz. Electromagnetic waves travel through air at 3.0 × 10⁸ m/s.

    From the topic: Electromagnetic spectrum

    1. (a)Calculate the wavelength used by this station.

      3 marks
      Show the answer

      Answer: λ = v ÷ f = 3.0 × 10⁸ ÷ 9.6 × 10⁷ = 3.1 m

      Marking points

      • λ = v ÷ f (or v = fλ) seen
      • 3.0 × 10⁸ ÷ 9.6 × 10⁷ seen
      • 3.1 m (accept 3.13 m)
    2. (b)A microwave oven uses microwaves of wavelength 0.12 m. State whether their frequency is higher or lower than that of the radio waves. Explain your answer.

      2 marks
      Show the answer

      Answer: Higher. Both waves travel at the same speed, and the microwaves have the shorter wavelength, so f = v ÷ λ is larger.

      Marking points

      • higher
      • same speed but shorter wavelength (so f = v ÷ λ is larger)
    3. (c)State the harmful effect on people of too much exposure to microwaves.

      1 mark
      Show the answer

      Answer: Body cells are heated from the inside.

      Marking points

      • cells heated inside the body
    4. (d)State two uses of microwaves other than cooking.

      2 marks
      Show the answer

      Answer: Satellite television and mobile phones.

      Marking points

      • one from: satellite television (or other links with satellites); mobile (cell) phones; wireless internet (Wi-Fi)
      • a second, different use from that list
  7. 7.A student builds a circuit containing a cell, a switch, a lamp and an ammeter.

    From the topic: Electric current

    1. (a)State how the ammeter must be connected in the circuit.

      1 mark
      Show the answer

      Answer: In series with the lamp.

      Marking points

      • in series
    2. (b)The ammeter has two ranges, 0–1 A and 0–10 A. The current is about 0.3 A. State which range the student should use and explain why.

      2 marks
      Show the answer

      Answer: 0–1 A, because the reading still fits on this scale and it gives a larger deflection, so it can be read more precisely.

      Marking points

      • 0–1 A range
      • reading stays on scale and can be read more precisely (larger deflection / smaller divisions)
    3. (c)Describe how charge flows through the metal wires of the circuit.

      2 marks
      Show the answer

      Answer: Free electrons in the metal move (drift) through the wire, carrying the charge round the circuit.

      Marking points

      • free electrons carry the charge
      • they move/drift through the wire, round the circuit
  8. 8.A hydroelectric power station sends electrical power to a distant city along overhead transmission cables. Transformers are used at both ends of the cables.

    From the topic: Transformers

    1. (a)State where a step-up transformer is used and where a step-down transformer is used in this system.

      2 marks
      Show the answer

      Answer: Step-up: at the power station, between the generator and the transmission cables. Step-down: near the city, between the cables and the consumers.

      Marking points

      • step-up at the power station (before the transmission cables)
      • step-down near the city / the consumers (after the transmission cables)
    2. (b)State two advantages of transmitting electrical power at a very high voltage.

      2 marks
      Show the answer

      Answer: Less power is lost as heat in the cables. The current is smaller, so thinner and cheaper cables can be used.

      Marking points

      • less power (energy) lost, as thermal energy, in the cables
      • smaller current, so thinner (lighter / cheaper) cables can be used