Skip to content

An original Labverse practice paper — not an official exam paper

Cambridge IGCSE Physics (0625)

Cambridge IGCSE Physics Paper 1 practice paper C

Written by Labverse from our own exam-style questions, to the same time and total marks as Cambridge International’s Paper 1 (0625/11, 0625/12, 0625/13), on the same topics. It is not set, checked or endorsed by Cambridge International.

Time allowed
45 minutes
Total marks
40
Questions
40
Level
Core

Instructions

  • Answer every question. Work in one sitting and stop when the time is up.
  • Each question has one correct answer. Choose A, B, C or D. Each question is worth 1 mark.

To print the answers too, open the mark scheme at the end first.

Marks by topic

  • Motion · 4 marks
  • Forces · 4 marks
  • Energy, work and power · 4 marks
  • Thermal physics · 3 marks
  • Transfer of thermal energy · 3 marks
  • Waves and sound · 4 marks
  • Light and the electromagnetic spectrum · 4 marks
  • Electrical quantities · 3 marks
  • Electric circuits and electrical safety · 3 marks
  • Magnetism and electromagnetic effects · 4 marks
  • Nuclear physics · 3 marks
  • Space physics · 1 mark

Questions

  1. Which of these is a speed rather than a velocity?

    1. A15 m/s north
    2. B15 m/s
    3. C15 m
    4. D15 m/s²
  2. Question 2Acceleration

    Near the surface of the Earth, the acceleration of a freely falling object is approximately

    1. A98 m/s²
    2. B9.8 m/s²
    3. C0.98 m/s²
    4. D1.6 m/s²
  3. Question 3Density

    A cube has sides of 3.0 cm and a mass of 54 g. What is its density?

    1. A0.50 g/cm³
    2. B18 g/cm³
    3. C2.0 g/cm³
    4. D6.0 g/cm³
  4. Question 4Density

    Fresh water has a density of 1000 kg/m³. Which of these objects floats in fresh water?

    1. AA glass marble, 2500 kg/m³
    2. BA brick, 1900 kg/m³
    3. CA rubber stopper, 1200 kg/m³
    4. DA candle, 900 kg/m³
  5. A mass of 300 g is hung on a spring. Taking g as 9.8 N/kg, what is the load on the spring?

    1. A2.94 N
    2. B300 N
    3. C2940 N
    4. D30.6 N
  6. Question 6Resultant force

    A cyclist rides along a straight, flat road at a constant speed. Which statement is correct?

    1. ANo forces act on the cyclist.
    2. BThe resultant force acts forwards.
    3. CThe forward force is greater than the backward force.
    4. DThe resultant force on the cyclist is zero.
  7. A box is tilted onto one edge and released. It falls back onto its base. What must have been true when it was released?

    1. AIts centre of gravity was outside the box.
    2. BThe vertical line through its centre of gravity passed through its base.
    3. CIts weight was zero.
    4. DThe vertical line through its centre of gravity passed outside its base.
  8. Question 8Pressure

    A gas cylinder of weight 360 N stands on a base of area 0.040 m². What pressure does it exert on the floor?

    1. A900 N/m²
    2. B9000 N/m²
    3. C0.000 11 N/m²
    4. D14.4 N/m²
  9. A pendulum bob swings to and fro. Ignoring air resistance, where is the energy in its kinetic store greatest?

    1. AHalfway between the lowest point and one end
    2. BIt is the same at every point
    3. CAt either end of the swing
    4. DAt the lowest point of the swing
  10. Question 10Work done

    Ignoring air resistance, a winch does 4.5 kJ of work lifting a load at a steady speed. How much energy is transferred to the load's gravitational potential store?

    1. AIt depends on how long the lift takes
    2. B0 kJ
    3. C45 kJ
    4. D4.5 kJ
  11. Question 11Power

    Which of these is the meaning of power?

    1. AThe work done per unit time
    2. BThe energy wasted by a machine
    3. CThe total energy that a machine can store
    4. DThe force multiplied by the distance moved
  12. Question 12Power

    A 2.0 kW heater is switched on for 15 s. How much energy does it transfer?

    1. A30 000 J
    2. B30 J
    3. C0.0075 J
    4. D133 J
  13. A gas is at a temperature of 150 K. What is this temperature in degrees Celsius?

    1. A−123 °C
    2. B423 °C
    3. C−423 °C
    4. D123 °C
  14. Which statement about the particles of a substance at absolute zero is correct?

    1. AThey move faster than at any other temperature.
    2. BThey have the same kinetic energy as at 0 °C.
    3. CThey have the least kinetic energy they can have.
    4. DThey have the most kinetic energy they can have.
  15. Which statement describes evaporation in terms of particles?

    1. AThe most energetic particles escape from the surface.
    2. BGas particles from the air join the liquid's surface.
    3. CThe slowest particles leave the surface of the liquid.
    4. DParticles all through the liquid form bubbles of gas.
  16. Question 16Conduction

    In a rods-and-wax experiment, why must every rod be the same length and thickness?

    1. ASo that the rods lose no energy to the air
    2. BSo that glass can conduct as well as metal
    3. CSo that every pin falls at the same moment
    4. DSo that the material is the only difference
  17. Question 17Convection

    In which pair of materials can convection currents form?

    1. AWater and air
    2. BWood and stone
    3. CCopper and steel
    4. DIce and glass
  18. Which type of electromagnetic radiation is thermal radiation?

    1. AMicrowave
    2. BUltraviolet
    3. CGamma
    4. DInfrared
  19. Ripples have a frequency of 5.0 Hz and a wavelength of 4.0 cm. What is their speed?

    1. A1.25 m/s
    2. B0.20 m/s
    3. C20 m/s
    4. D0.0080 m/s
  20. In a transverse wave, how does each particle of the medium move?

    1. AParallel to the direction the wave travels
    2. BIn a straight line towards the source
    3. CAt right angles to the direction the wave travels
    4. DAlong with the wave, away from the source
  21. Plane ripples cross from deep water onto a glass plate. Which quantity stays the same?

    1. ATheir frequency
    2. BThe water depth
    3. CTheir wavelength
    4. DTheir speed
  22. Question 22Ultrasound

    Which of these frequencies is ultrasound?

    1. A200 Hz
    2. B40 kHz
    3. C15 kHz
    4. D2 kHz
  23. Why can the image in a plane mirror not be caught on a screen?

    1. AMirrors absorb most of the light they receive
    2. BIt is upside down, so it cannot be focused
    3. CIt is too faint for a screen to show it
    4. DReflected light only appears to come from it
  24. When the angle of incidence equals the critical angle, what is the angle of refraction?

    1. A45°
    2. B90°
    3. C0°
    4. D180°
  25. Question 25Thin lenses

    A beam of rays parallel to the principal axis passes through a thin converging lens. Where do the rays meet?

    1. AAt twice the focal length from the lens
    2. BAt the centre of the lens
    3. CAt the principal focus on the near side
    4. DAt the principal focus on the far side
  26. Which region of the electromagnetic spectrum lies between ultraviolet and gamma rays?

    1. AInfrared
    2. BX-rays
    3. CRadio waves
    4. DMicrowaves
  27. Question 27Electric charge

    After being rubbed with silk, a glass rod is positive. Which statement explains this?

    1. AElectrons moved from the silk to the glass
    2. BElectrons moved from the glass to the silk
    3. CFriction made new positive charge on it
    4. DProtons moved from the silk to the glass
  28. Which statement describes the e.m.f. of a cell?

    1. Athe force that pushes electrons through a wire
    2. Bthe charge passing a point each second
    3. Cthe total energy stored in the cell
    4. Dthe work done by the cell in moving unit charge around a complete circuit
  29. Question 29Resistance

    Which change to a metal wire reduces its resistance?

    1. Amaking it longer
    2. Bwinding it into a coil without changing its length
    3. Cmaking it thinner
    4. Dmaking it thicker
  30. Which component has a resistance that decreases as its temperature rises?

    1. ALDR
    2. Bfuse
    3. CNTC thermistor
    4. Dfixed resistor
  31. A 10 Ω resistor and a 30 Ω resistor are connected in series. What is their combined resistance?

    1. A7.5 Ω
    2. B20 Ω
    3. C40 Ω
    4. D300 Ω
  32. Four 1.5 V cells are connected in series, all facing the same way. What is the combined e.m.f.?

    1. A6.0 V
    2. B1.5 V
    3. C3.0 V
    4. D0.375 V
  33. Which pair contains only magnetic materials?

    1. AAluminium and steel
    2. BBrass and nickel
    3. CCopper and iron
    4. DNickel and cobalt
  34. Question 34Magnetic fields

    What do iron filings sprinkled over a bar magnet show?

    1. AThe direction of the field only
    2. BThe shape of the field only
    3. CBoth the shape and the direction
    4. DA measured value of field strength
  35. A wire in a magnetic field is pushed to the right. The current and the field are both reversed. Which way is the wire pushed now?

    1. ANowhere, as there is no force
    2. BTo the right, as before
    3. CUpwards, out of the gap
    4. DTo the left, the other way
  36. Which change makes the force on a current-carrying rod in a magnetic field larger?

    1. ATurning the magnet round
    2. BUsing a plastic rod instead
    3. CReversing the current in it
    4. DUsing a larger current
  37. Question 37The nuclear atom

    Where are the electrons in the nuclear model of the atom?

    1. AMoving in orbits around the nucleus
    2. BHeld still at the centre of the atom
    3. CPacked tightly inside the nucleus
    4. DSpread evenly through a positive cloud
  38. Why do two isotopes of the same element react in the same way?

    1. ATheir atoms have the same number of electrons
    2. BTheir nuclei hold the same number of neutrons
    3. CTheir atoms are both radioactive
    4. DTheir nuclei have the same mass
  39. Question 39Half-life

    A sample's count rate drops from 512 to 64 counts/s in 18 hours. What is the half-life?

    1. A18 hours
    2. B9 hours
    3. C6 hours
    4. D2.25 hours
  40. Question 40The Solar System

    What keeps the planets in their orbits around the Sun?

    1. APressure from sunlight
    2. BThe Sun's gravitational pull
    3. CThe planets' own spin
    4. DThe Sun's magnetic field

End of practice paper · 40 marks in total

Mark schemeOpen it only after you have finished the paper.Show
  1. 1. B A speed has a size and a unit of m/s but no direction. Adding 'north' makes it a velocity; m/s² is an acceleration unit and m is a distance.

    Revise: Speed and velocity

  2. 2. B The acceleration of free fall near the Earth's surface is about 9.8 m/s². 1.6 m/s² is the value near the Moon's surface.

    Revise: Acceleration

  3. 3. C The volume is 3.0 × 3.0 × 3.0 = 27 cm³, so ρ = 54 ÷ 27 = 2.0 g/cm³. Dividing by 3.0 or by 9.0 uses a length or an area instead of the volume.

    Revise: Density

  4. 4. D Only the candle wax is less dense than water, so only the candle floats. The other three are denser than water and sink.

    Revise: Density

  5. 5. A Convert to kilograms first: 0.300 kg × 9.8 N/kg = 2.94 N. Using 300 instead of 0.300 gives 2940 N, and dividing by g gives 30.6.

    Revise: Springs and load–extension graphs

  6. 6. D Constant speed in a straight line means the velocity is not changing, so the forward and backward forces are equal and the resultant force is zero.

    Revise: Resultant force

  7. 7. B With the weight's line of action still over the base, the weight has a moment about the edge that turns the box back. Outside the base, the same moment would tip it over.

    Revise: Centre of gravity and stability

  8. 8. B p = F ÷ A = 360 ÷ 0.040 = 9000 N/m². Multiplying gives 14.4, dividing the area by the force gives 0.000 11, and 900 comes from misreading the area as 0.40 m².

    Revise: Pressure

  9. 9. D The bob is lowest there, so the most energy has left the gravitational potential store and reached the kinetic store. At each end the bob stops for an instant and its kinetic store is empty.

    Revise: Kinetic and gravitational potential energy

  10. 10. D Work done equals energy transferred. The speed is steady, so the kinetic store does not change, and all 4.5 kJ goes to the gravitational potential store. The time affects the power, not the energy.

    Revise: Work done

  11. 11. A Power is the work done (or energy transferred) per unit time. Force × distance is the work done itself, not the rate at which it is done.

    Revise: Power

  12. 12. A ΔE = Pt = 2000 × 15 = 30 000 J. Leaving the power in kW gives 30, and dividing instead of multiplying gives 133 J.

    Revise: Power

  13. 13. A θ = T − 273 = 150 − 273 = −123 °C. Adding 273 gives 423, but a Celsius number is always 273 smaller than the kelvin number.

    Revise: Absolute zero and the kelvin scale

  14. 14. C Absolute zero is the lowest possible temperature, so the particles' kinetic energy is as small as it can be. At 0 °C, which is 273 K, they still move quickly.

    Revise: Absolute zero and the kelvin scale

  15. 15. A Only particles near the surface with enough energy can break away. Bubbles forming all through the liquid describes boiling, and particles joining a liquid from the air describes condensation.

    Revise: Melting, boiling and evaporation

  16. 16. D Keeping the size the same makes it a fair test: any difference in when the pins fall must then be caused by the material. The pins fall at different times, the rods still lose energy to the air, and glass stays a poor conductor.

    Revise: Conduction

  17. 17. A Convection needs a fluid, a liquid or a gas, whose particles can move from place to place. Copper, steel, ice, glass, wood and stone are solids, so energy passes through them by conduction.

    Revise: Convection

  18. 18. D Thermal radiation is infrared. Every object emits it, and it is the radiation you feel as warmth from a fire or the Sun.

    Revise: Thermal radiation

  19. 19. B Convert first: 4.0 cm = 0.040 m, so v = fλ = 5.0 × 0.040 = 0.20 m/s. Forgetting to convert gives 20, which is really 20 cm/s. 1.25 is f ÷ λ in cm, and 0.0080 is λ ÷ f in m.

    Revise: General properties of waves

  20. 20. C In a transverse wave the vibration is across the direction of travel, like a rope shaken up and down. Each particle vibrates about its rest position and is not carried along.

    Revise: Transverse and longitudinal waves

  21. 21. A The vibrating bar sets the frequency, so it does not change. The water is shallower over the plate, so the speed falls and the wavelength falls with it.

    Revise: Reflection, refraction and diffraction

  22. 22. B Ultrasound is sound above 20 kHz. 40 kHz is above that limit; 200 Hz, 2 kHz and 15 kHz are all inside the range people can hear.

    Revise: Ultrasound

  23. 23. D The image is virtual. Traced backwards, the reflected rays seem to meet behind the mirror, but no light actually goes there, so a screen in that position receives none of it.

    Revise: Reflection of light

  24. 24. B At the critical angle the refracted ray runs along the boundary, which is at 90° to the normal.

    Revise: Critical angle and total internal reflection

  25. 25. D A converging lens bends parallel rays inwards so that they cross at the principal focus beyond the lens. The near-side principal focus is where rays must start in order to leave parallel.

    Revise: Thin lenses

  26. 26. B In order of rising frequency the regions run radio waves, microwaves, infrared, visible light, ultraviolet, X-rays, gamma rays. X-rays sit between ultraviolet and gamma rays; the other three options are at the low-frequency end.

    Revise: Electromagnetic spectrum

  27. 27. B The glass lost electrons to the silk, so it has more protons than electrons and is positive. The silk is left negative by the same amount.

    Revise: Electric charge

  28. 28. D E.m.f. is work done per unit charge by the source as it drives charge round the whole circuit. It is not a force.

    Revise: E.m.f. and potential difference

  29. 29. D A thicker wire has a larger cross-sectional area, so its resistance is smaller. Coiling the wire does not change its length or area.

    Revise: Resistance

  30. 30. C An NTC thermistor's resistance falls as it gets warmer. An LDR responds to light, not temperature.

    Revise: Circuit diagrams and components

  31. 31. C In series, resistances add: 10 + 30 = 40 Ω. 7.5 Ω is what they would give in parallel.

    Revise: Series and parallel circuits

  32. 32. A E.m.f.s of cells in series facing the same way add: 4 × 1.5 = 6.0 V.

    Revise: Series and parallel circuits

  33. 33. D Nickel and cobalt are both magnetic, like iron and steel. Copper, aluminium and brass are non-magnetic, so every other pair contains one of them.

    Revise: Magnets and magnetic materials

  34. 34. B The filings line up to show the pattern of the lines, but a filing has no marked N end, so they cannot show which way the field points. They give no measured value of strength either.

    Revise: Magnetic fields

  35. 35. B Reversing the current alone would send the wire left, and reversing the field alone would too. Doing both reverses the force twice, so it points to the right again.

    Revise: Force on a current-carrying conductor

  36. 36. D A larger current gives a bigger push. Reversing the current or the magnet changes only the direction, and a plastic rod would carry no current, so there would be no force.

    Revise: Force on a current-carrying conductor

  37. 37. A The nucleus is at the centre and the electrons orbit it. A model with electrons dotted through a spread-out positive cloud was replaced after the alpha-scattering experiment.

    Revise: The nuclear atom

  38. 38. A Chemical reactions depend on the electrons. Neutral atoms of two isotopes have equal numbers of electrons, even though their nuclei have different masses.

    Revise: The nucleus and isotopes

  39. 39. C 512 → 256 → 128 → 64 is three halvings in 18 hours, so one half-life is 18 ÷ 3 = 6 hours.

    Revise: Half-life

  40. 40. B The Sun has most of the Solar System's mass, and its gravitational attraction is the force that holds the planets in orbit.

    Revise: The Solar System