Skip to content

Cambridge IGCSE Physics (0625) · Electric circuits and electrical safety

Circuit diagrams and components

4.3.1

Circuit diagrams use standard symbols for components such as cells, switches, resistors, LDRs, NTC thermistors, fuses and relays. You need to draw and read them and know how each part behaves; diodes and LEDs are Supplement.

Loading simulation…

Symbols match your course. Open the full circuit builder simulation for more presets and teacher tools.

Why we draw circuit diagrams

A photo of a circuit is hard to follow. A circuit diagram replaces every part with a standard symbol and every wire with a straight line, so an engineer in Lagos and a student in Lahore read it the same way. Cambridge IGCSE asks you to draw these diagrams, read them, and say how each component behaves in the circuit. Most of the list is Core; diodes and LEDs are Supplement.

Rules for a clear diagram (Core)

  • Use a ruler for straight wires with square corners.
  • Put a solid dot wherever wires join at a junction.
  • Leave no gaps in a wire unless you mean an open switch.
  • Show ammeters in series and voltmeters in parallel with the part they measure.

Common symbols and what the parts do (Core)

ComponentHow the symbol looksWhat it does in a circuit
CellTwo parallel lines, one long and one short (the short one is often drawn thicker); the long one is the positive terminalProvides an e.m.f. that drives charge round the circuit
BatteryTwo or more cell symbols joined in a rowGives a bigger e.m.f. than a single cell
SwitchA break in the wire with a short line hinged at one sideOpen: no current. Closed: completes the circuit
Fixed resistorAn empty rectangleLimits the current; its resistance does not change
Variable resistorA rectangle crossed by a slanting arrowIts resistance can be adjusted, for example to dim a lamp
LampA circle with a cross insideGlows when current flows through its filament
Ammeter, voltmeterA circle containing A, or a circle containing VMeasure current (in series) and p.d. (in parallel)
Motor, generatorA circle containing M, or a square containing GA motor turns when current flows; a generator produces an e.m.f. when it is turned
FuseA small rectangle with a line running along its lengthIts thin wire melts and breaks the circuit if the current exceeds its rating
LDRA resistor rectangle with two arrows pointing towards itResistance falls as the light on it gets brighter
Thermistor (NTC)A resistor rectangle crossed by a diagonal line with a short flat endResistance falls as its temperature rises

You also need to recognise and use these parts:

  • A power supply can provide d.c. or a.c., and its symbol shows which.
  • A heater is a resistor designed to transfer energy to its surroundings by heating.
  • A potential divider gives out an adjustable share of the supply p.d. Its symbol is a resistor with an arrow touching its side, a sliding contact.
  • A magnetising coil, drawn as a row of loops, becomes an electromagnet when current flows.
  • A transformer, drawn as two coils with a straight line for the iron core between them, changes the size of an alternating p.d.
  • A relay uses a small current in its coil to work a switch in a second circuit, so a low-current circuit can control a high-current one.
  • An electric bell rings while current passes through it.

Worked example: an LDR in a circuit (Core)

An LDR is connected in series with an ammeter and a 6.0 V battery. In dim light the LDR has a resistance of 2000 Ω; in bright sunlight its resistance falls to 300 Ω. Find the current in each case. Treat the ammeter, wires and battery as having no resistance.

Equation: I=V/RI = V / R

Dim light:

I=6.02000=0.0030 A=3.0 mAI = \frac{6.0}{2000} = 0.0030\ \text{A} = 3.0\ \text{mA}

Bright light:

I=6.0300=0.020 A=20 mAI = \frac{6.0}{300} = 0.020\ \text{A} = 20\ \text{mA}

Answer: brighter light lowers the resistance, so the current rises from 3.0 mA to 20 mA. Many automatic street lamps use this behaviour to switch themselves on at dusk.

Explore the components in the simulation

In the simulation above, choose the LDR divider starting circuit and move the light level slider. The voltmeter across the LDR responds as its resistance changes: dimmer light, larger resistance, bigger share of the p.d. Then load the Diode circuit and turn the diode round: the current stops.

Common mistakes

  • Drawing the cell symbol with the long and short lines swapped. The long line is the positive terminal.
  • Leaving gaps at corners or forgetting the dot at a junction, so the examiner cannot tell which wires are joined.
  • Saying an LDR's resistance increases in bright light. It decreases as the light gets brighter.
  • Saying an NTC thermistor's resistance increases with temperature. For the NTC type in the syllabus it decreases.
  • Confusing a variable resistor (arrow through the rectangle) with an LDR (arrows pointing at the rectangle).
  • (Supplement) Thinking a diode works either way round. It only conducts in the direction the triangle points.

Exam-style questions

Original questions written in the style of Cambridge IGCSE. Try each one before you reveal the answer.

  1. 1.A student draws a circuit diagram for a torch. It has two cells, a switch and a lamp, all in series.

    1. (a)Describe the circuit symbol for a cell and state which side is the positive terminal.

      2 marks
      Show the answer

      Answer: A long line next to a shorter line, parallel to each other. The long line is the positive terminal.

      Marking points

      • long line and short line (parallel to each other)
      • long line is positive
    2. (b)The student adds an ammeter to measure the current in the lamp and a voltmeter to measure the p.d. across it. State how each meter is connected.

      2 marks
      Show the answer

      Answer: Ammeter: in series with the lamp. Voltmeter: in parallel, across the lamp.

      Marking points

      • ammeter in series
      • voltmeter in parallel (across the lamp)
  2. 2.A light-dependent resistor (LDR) is used in a circuit that switches on a street lamp.

    1. (a)State how the resistance of an LDR changes when the light falling on it becomes brighter.

      1 mark
      Show the answer

      Answer: It decreases.

      Marking points

      • resistance decreases
    2. (b)The LDR is connected in series with a 9.0 V battery and an ammeter. In darkness its resistance is 6000 Ω. Calculate the current.

      3 marks
      Show the answer

      Answer: I = V ÷ R = 9.0 ÷ 6000 = 0.0015 A (1.5 mA)

      Marking points

      • I = V/R
      • 9.0 ÷ 6000
      • 0.0015 A or 1.5 mA
    3. (c)Suggest what happens to the ammeter reading as the Sun rises.

      1 mark
      Show the answer

      Answer: It increases.

      Marking points

      • reading increases (resistance falls)
  3. 3.An NTC thermistor is part of a fire alarm circuit. The circuit also contains a relay, a fuse and an electric bell.

    1. (a)State what happens to the resistance of the NTC thermistor as its temperature rises.

      1 mark
      Show the answer

      Answer: It decreases.

      Marking points

      • resistance decreases
    2. (b)Describe what the relay does in this circuit.

      2 marks
      Show the answer

      Answer: A small current in the relay coil operates a switch, which turns on a separate circuit carrying a larger current to the bell.

      Marking points

      • a (small) current in the coil operates/closes a switch
      • switching a separate circuit (with a larger current) for the bell
    3. (c)State the purpose of the fuse.

      2 marks
      Show the answer

      Answer: It melts and breaks the circuit if the current becomes larger than its rating, protecting the wiring and components.

      Marking points

      • melts / breaks the circuit
      • when the current exceeds its rating
  4. 4.A student connects a light-emitting diode (LED), a resistor and a battery in series. The LED lights up.

    1. (a)(Supplement) The student turns the LED round in the circuit. State and explain what happens.

      2 marks
      Show the answer

      Answer: The LED goes out because there is no current. A diode only lets current pass in one direction.

      Marking points

      • LED does not light / no current
      • a diode conducts in one direction only
    2. (b)(Supplement) Describe the circuit symbol for an LED.

      2 marks
      Show the answer

      Answer: A diode symbol (a triangle with a bar across its point) with two arrows pointing away from it.

      Marking points

      • triangle with a bar (diode symbol)
      • two arrows pointing outwards

Quick check

6 questions

  1. 1.Which component has a resistance that decreases as its temperature rises?
  2. 2.What does a circle with a cross inside it represent on a circuit diagram?
  3. 3.Which component changes the size of an alternating p.d.?
  4. 4.How is a variable resistor drawn in a circuit diagram?
  5. 5.(Supplement) What is the main property of a diode?
  6. 6.Which component would you use to dim a lamp gradually?