What this topic covers
From the supply to the surroundings (Core)
A cell or battery holds energy in its chemical store, and the mains brings energy from a power station. The current does electrical work, passing energy to each component, and from there it spreads out:
- a lamp gives out light and also warms the air around it
- a heater or kettle element raises the internal (thermal) energy of itself and of the air or water around it
- a motor gives its moving parts kinetic energy and warms up a little
In the end, nearly all of it becomes internal energy of the surroundings, which get very slightly warmer.
Power and energy (Core)
Power is measured in watts (W), current in amperes (A), potential difference in volts (V), energy in joules (J) and time in seconds (s). One watt means one joule transferred per second. Because is the power, is power multiplied by time, matching from topic 1.7.4.
(Supplement) Why works: by , a coulomb moving through the component transfers joules, and by , coulombs pass through it each second.
Worked example 1 (Core): an electric iron
An iron connected to a 230 V supply takes a current of 4.0 A for 15 minutes. Calculate (a) its power and (b) the energy it transfers.
Given: A, V, s
(a) W
(b) J
Answer: 920 W, and J to 2 significant figures.
The kilowatt-hour (Core)
Measured in joules, the energy a home uses is enormous, so electricity meters count kilowatt-hours. One kilowatt-hour (1 kWh) is the energy transferred when an appliance with a power of 1 kW runs for 1 hour:
For energy in kWh, use the power in kilowatts and the time in hours. To find a cost, multiply the number of kWh by the price of one kWh.
Worked example 2 (Core): a water heater
A 3.0 kW water heater runs for 40 minutes every day. Electricity costs Rs 50 for each kWh, a round price chosen for practice. Find the cost of running the heater for a 30-day month.
Given: kW; total time minutes h
Energy: kWh
Cost:
Answer: Rs 3000. In joules the same energy is J, which shows why bills use kWh.
Explore it: from joules to cost
In the simulation above, pick Torch lamp on 3 V from the Examples menu: a 12 Ω lamp on a 3 V battery, with the stopwatch set to stop at 60 s. The Current and Power cards read 0.250 A and 0.750 W. Predict the energy after 60 s, then press Play. When the stopwatch stops, Energy transferred shows 45.0 J, and the Working box confirms it with , tagged recall. The battery's e.m.f. and the energy both use the symbol , as the syllabus does.
Now press Appliances. A 2 kW fan heater is set to run for 3 hours, at a price of 0.30 per kWh in neutral units of money. Work out the energy and the cost, then press Play to run the time-lapse. The Energy card finishes at 6.00 kWh (21.6 MJ) and the Cost card at 1.80. Drag Price of 1 kWh down to 0.15 and the cost halves to 0.90. In the list Every appliance for 3 hours, the 2.5 kW kettle uses 7.50 kWh, 250 times the 0.0300 kWh of the LED lamp. The powers are typical values, and the prices are illustrations, not real tariffs.