Skip to content

GCSE Physics — AQA · Electricity

Energy transfers in appliances

4.2.4.2

Every appliance is built to move energy. A drill or a fan fills a kinetic store; a kettle fills a thermal store. The energy comes from a battery's chemical store or from the mains. Recall E = Pt and E = QV; a higher power rating changes the stores faster. Both tiers, Physics and Combined Science.

Loading simulation…

Symbols match your course. Open the full charge, current, energy and power simulation for more presets and teacher tools.

What you need for 4.2.4.2

This spec point is on both tiers, for GCSE Physics and for Combined Science. It is about what appliances are for: moving energy from a supply into the store where it is useful. Expect questions that ask you to:

  • say where an appliance gets its energy (a battery or the mains) and which store it fills, for motors and for heaters
  • find the energy transferred from the power and the running time, or from the charge and the p.d.
  • use power ratings to compare how quickly appliances change energy stores

Both equations must be recalled, because the equation sheet leaves them out.

Following the energy

A current flowing through an appliance means electrical work is being done: energy is moving from the supply into the appliance. It may start in the chemical store of a battery, or arrive from a power station through the a.c. mains.

ApplianceSupplyUseful store that increases
electric toothbrushrechargeable batterykinetic store of the motor and brush head
kettlemainsthermal store of the heating element, then of the water
hair dryermainskinetic store of the fan, and thermal store of the heater and the air blown out

No appliance puts all of its energy where we want it. Motors get warm and make a noise, and a kettle warms the kitchen as well as the water. This wasted energy is dissipated: the surroundings gain it as thermal energy.

Energy from power and time

E=PtE = Pt

Measure the energy EE in joules (J), the power PP in watts (W) and the time tt in seconds (s). Double the power, or the time, and the energy doubles.

Worked example 1. A 2.2 kW kettle is switched on for 3 minutes 30 seconds. How much energy does it transfer?

Given: P=2.2 kW=2200P = 2.2\ \text{kW} = 2200 W, t=3×60+30=210t = 3 \times 60 + 30 = 210 s

Equation: E=PtE = Pt

Substitution: E=2200×210E = 2200 \times 210

Answer: E=462 000E = 462\,000 J, about 460 kJ to 2 significant figures.

Energy from charge and p.d.

Each coulomb moving through a p.d. of VV volts transfers VV joules. For a charge flow QQ, in coulombs (C), the total is

E=QVE = QV

Worked example 2. A cordless drill runs from an 18 V battery. Its motor takes a steady current of 3.0 A for 5.0 minutes. Calculate the energy transferred.

Given: I=3.0I = 3.0 A, t=5.0×60=300t = 5.0 \times 60 = 300 s, V=18V = 18 V

Step 1, the charge: Q=It=3.0×300=900Q = It = 3.0 \times 300 = 900 C

Step 2, the energy: E=QV=900×18E = QV = 900 \times 18

Answer: E=16 200E = 16\,200 J, about 16 kJ to 2 significant figures.

As a check, P=VI=18×3.0=54P = VI = 18 \times 3.0 = 54 W, and E=Pt=54×300=16 200E = Pt = 54 \times 300 = 16\,200 J again.

Power ratings and stored energy

A power rating is the number of joules an appliance transfers each second in normal use, so a higher rating changes the energy stores faster. In the same hour, a 2 kW fan heater transfers 200 times as much energy as a 10 W LED lamp. If no energy were wasted, a 3.0 kW kettle would raise the thermal store of a litre of water by as much in 1 minute as a 1.5 kW travel kettle does in 2 minutes.

Explore it: following each joule

In the simulation above, press Play and let the stopwatch run until it stops at 30 s. Each 1 C bunch leaves the battery labelled 6 J and is down to 0 J after the lamp. The Energy transferred card ends at 360 J, which the Working box reaches by two routes: E=QVE = QV (60.0 C × 6 V) and E=PtE = Pt (12.0 W × 30.0 s).

Now choose Motor on 6 V from the Examples menu and read the note under the cards: most of the energy goes to the kinetic store of the fan, and a smaller part heats the coil. With 12 V, 36 W heater, the note says that all of it heats the heater and then the surroundings.

Finally, press Appliances, pick Kettle for 15 minutes (a typical 2.5 kW rating) from the Examples menu and press Play. Under its kWh value, the Energy card shows 2.25 MJ: check it with 2500 W × 900 s. The Working lines in this view are tagged "not in AQA GCSE", so treat the kWh and the cost as extra.

Equations

  • Power and energy transferred

    Learn this

    P=Et

    power = energy transferred ÷ time

    Open calculator →
  • Energy, charge and potential difference

    Learn this

    E=QV

    energy transferred = charge flow × potential difference

    Open calculator →

Common mistakes

  • Putting minutes or hours into E = Pt when the answer is wanted in joules. Convert the time to seconds first: 5 minutes is 300 s.
  • Forgetting the kilo: a 2.2 kW kettle has P = 2200 W, and 460 kJ is 460 000 J.
  • Writing about an 'electrical energy store'. A battery has a chemical store, the mains is a supply rather than a store, and the current transfers energy electrically, by doing work.
  • Putting a current into E = QV. When you know the current and how long it flows, work out the charge with Q = It first.
  • Saying a motor transfers all of its energy to the kinetic store. Some is always dissipated, by heating the motor and the surroundings and as sound.
  • Thinking a higher power rating means an appliance always transfers more energy. It transfers energy at a higher rate, but a low-power appliance left running for longer can still transfer more in total.

Exam-style questions

Original questions written in the style of GCSE AQA. Try each one before you reveal the answer.

  1. 1.A kitchen has an electric kettle with a power rating of 3.0 kW and a food mixer with a power rating of 0.40 kW. Both are plugged into the mains.

    1. (a)Calculate the energy transferred by the kettle in 2.0 minutes.

      2 marks
      Show the answer

      Answer: P = 3000 W and t = 120 s. E = Pt = 3000 × 120 = 360 000 J

      Marking points

      • E = 3000 × 120
      • E = 360 000 J
    2. (b)Describe and compare the energy transfers in the kettle and in the food mixer when each is used for 2.0 minutes. Refer to energy stores and to the power ratings in your answer.

      6 marks
      Show the answer

      Answer: In both appliances, energy is transferred electrically from the mains, because the current does work. In the kettle, the current heats the element, so the thermal store of the element increases and energy then passes by heating to the thermal store of the water. In the mixer, the motor turns the blades, so the energy goes mainly to the kinetic store of the motor and the blades. Neither transfer is perfect: the kettle also warms its own body and the air, and the mixer's motor heats up and makes sound, so some energy is dissipated to the surroundings. In 2.0 minutes the kettle transfers 360 000 J but the mixer only 400 × 120 = 48 000 J. The kettle's power rating is 7.5 times bigger, so in the same time it transfers 7.5 times as much energy. (This part is marked by levels of response: the examiner judges your answer overall and decides which level it fits, instead of giving one mark per point. A clear, linked answer that covers both appliances, their stores, the wasted energy and the effect of the power ratings, like this one, reaches the top level.)

      Marking points

      • Energy is transferred electrically from the mains (the current does work) in both appliances.
      • Kettle: the thermal store of the heating element increases, then the thermal store of the water.
      • Mixer: energy goes mainly to the kinetic store of the motor and blades.
      • Some energy is dissipated in both, e.g. heating the surroundings, or sound from the mixer.
      • In 2.0 minutes the mixer transfers 48 000 J, compared with 360 000 J for the kettle.
      • The kettle transfers more energy in the same time because its power rating is higher (7.5 times higher).
  2. 2.An electric shower has a power rating of 9.5 kW. A student takes a shower that lasts 6.0 minutes.

    1. (a)Give the equation that links energy transferred, power and time.

      1 mark
      Show the answer

      Answer: E = Pt (energy transferred = power × time)

      Marking points

      • E = Pt
    2. (b)Calculate the energy transferred during the shower.

      3 marks
      Show the answer

      Answer: P = 9500 W and t = 6.0 × 60 = 360 s. E = 9500 × 360 = 3 420 000 J

      Marking points

      • 9500 W and 360 s
      • E = 9500 × 360
      • E = 3 420 000 J (accept 3.4 MJ)
    3. (c)Which energy store of the water increases during the shower?

      1 mark
      Show the answer

      Answer: Its thermal store.

      Marking points

      • Thermal (energy) store of the water
    4. (d)The student cuts the shower to 4.0 minutes. Calculate how much less energy is transferred.

      2 marks
      Show the answer

      Answer: The shower is 2.0 minutes = 120 s shorter. Energy saved = 9500 × 120 = 1 140 000 J

      Marking points

      • 9500 × 120
      • 1 140 000 J (accept 1.1 MJ)
  3. 3.The motor of an electric scooter runs from a 36 V battery. On a short journey, the current in the motor is a steady 8.0 A for 10 minutes.

    1. (a)Calculate the charge that flows through the motor during the journey.

      3 marks
      Show the answer

      Answer: t = 10 × 60 = 600 s. Q = It = 8.0 × 600 = 4800 C

      Marking points

      • t = 600 s
      • Q = 8.0 × 600
      • Q = 4800 C
    2. (b)Calculate the energy transferred by this charge.

      2 marks
      Show the answer

      Answer: E = QV = 4800 × 36 = 172 800 J

      Marking points

      • E = 4800 × 36 (allow their charge from the part above)
      • E = 172 800 J (accept 170 kJ)
    3. (c)Not all of this energy ends up in the kinetic store of the scooter and rider. Describe what happens to the rest.

      2 marks
      Show the answer

      Answer: It is dissipated. The current heats the motor and the wires, so energy goes to the thermal store of the surroundings, and some is transferred away as sound.

      Marking points

      • Dissipated by heating the motor and wires (thermal store of the surroundings).
      • Some is transferred as sound (allow heating caused by friction).
  4. 4.Boiling the water in a kettle needs 336 kJ of energy to be transferred to the water.

    1. (a)A 2.8 kW kettle is used. Calculate the shortest time it could take to transfer 336 kJ.

      3 marks
      Show the answer

      Answer: E = 336 000 J and P = 2800 W. t = E ÷ P = 336 000 ÷ 2800 = 120 s

      Marking points

      • 336 000 J and 2800 W
      • t = 336 000 ÷ 2800
      • t = 120 s
    2. (b)A travel kettle has a power rating of 1.2 kW. Explain why it takes longer to boil the same water.

      2 marks
      Show the answer

      Answer: Its lower power means it transfers fewer joules each second. The same energy is still needed, so it takes longer: at least 336 000 ÷ 1200 = 280 s.

      Marking points

      • Lower power, so energy is transferred at a lower rate (fewer joules per second).
      • The same energy is needed, so it takes more time (allow 280 s).
    3. (c)In practice, the 2.8 kW kettle takes longer than the time you calculated. Suggest why.

      1 mark
      Show the answer

      Answer: Some energy is dissipated, warming the body of the kettle and the surrounding air, so more than 336 kJ must be transferred from the mains.

      Marking points

      • Some energy is wasted (dissipated) to the surroundings, e.g. heating the kettle and the air.

Quick check

6 questions

  1. 1.A 1.5 kW heater is switched on for 20 s. How much energy does it transfer?
  2. 2.A charge of 50 C flows through a p.d. of 12 V. How much energy is transferred?
  3. 3.An electric fan is switched on. Which store does most of the useful energy go to?
  4. 4.Appliance X has twice the power rating of appliance Y. Both are used for the same length of time. Which statement is true?
  5. 5.There is a p.d. of 9.0 V across a motor. What does this tell you?
  6. 6.A toy car's motor transfers 540 J in 3.0 minutes. What is its power?