What this topic covers
A pan of water on a stove in Colombo stops warming at 100 °C, yet a wet floor nearby dries without getting hot.
Melting and boiling (Core)
Heat a solid steadily and its temperature rises to the melting point, then stops. Energy still goes in, but it breaks the particles out of their fixed pattern rather than speeding them up, so the reading holds until all the solid has melted. At the boiling point, the energy pulls the liquid's particles far apart into a gas. Each change of state is a flat part of a temperature–time graph.
At standard atmospheric pressure (about 101 kPa), pure water melts at 0 °C and boils at 100 °C. The boiling point changes a lot with pressure: lower pressure, as up a mountain, means a lower boiling point.
Condensing and solidifying (Core)
Both changes give out energy. As a gas condenses, its particles lose energy and are pulled close together into a liquid. When steam mists a cold window, the water particles also slow down as they cool on the glass. As a liquid solidifies (freezes), its particles lose energy and settle into fixed positions in a regular pattern, only vibrating. A pure substance freezes at its melting point.
Evaporation (Core)
Particles in a liquid have a range of speeds. Some of the most energetic ones near the surface break away into the air: this is evaporation. It happens at any temperature: a puddle in Lagos dries on a 30 °C day. Because the fastest particles leave, those that stay move more slowly on average, and the liquid cools.
Boiling compared with evaporation (Supplement)
| Feature | Evaporation | Boiling |
|---|---|---|
| Where | Surface only | Throughout the liquid; vapour bubbles form inside it |
| Temperature | Any | Only at the boiling point |
| Effect on the liquid | What remains cools | Constant temperature while energy is supplied |
Speeding up evaporation (Supplement)
- A warmer liquid: more particles have enough energy to escape.
- A larger surface area: more particles sit at the surface.
- Air moving across the surface: it carries escaped particles away before they return.
Worked example 1: reading a heating curve (Core)
Crushed ice is heated steadily and stirred in a beaker in Karachi.
| Time / min | Temperature / °C |
|---|---|
| 0 | −10 |
| 1 | 0 |
| 2 | 0 |
| 3 | 0 |
| 4 | 0 |
| 5 | 15 |
| 7 | 55 |
| 9 | 95 |
| 10 | 100 |
| 11 | 100 |
(a) The reading stays at 0 °C from 1 to 4 min, so the melting point is 0 °C; at 3 min the beaker holds ice and water.
(b) How fast the water warms from 5 to 9 min:
(c) At 10 and 11 min the water is boiling: the energy turns water into steam, and the reading stays at 100 °C.
Worked example 2: why sweating cools you (Supplement)
- The most energetic particles of sweat escape from its surface.
- The rest have less kinetic energy on average, so the sweat becomes colder than the skin.
- Energy is conducted from the skin into the sweat and carried off by escaping particles, so the skin cools.
A clay matka, common in India and Pakistan, cools drinking water this way: water seeps through its wall and evaporates.
Simulation tasks
In the simulation above, the Heating curve defaults are Mass of ice 0.5 kg, −20 °C, Lagged, and a 500 W heater already on (Heater on).
- (Core) Press Play, then watch while Stage says Ice melts. Temperature sits at 0.0 °C while Energy supplied climbs and Changed state counts the melted ice.
- (Core) In Particles (model), the Average kinetic energy bar (Average KE on small screens) stops growing on each flat part, yet Internal energy gained keeps growing.
- (Core) Let the run finish. Readings rows from 840 s to 3000 s all show 100.0 and Water boils.
- (Core) Choose Cooling curve and press Play. The reading holds at 69.0 °C while Stage says Freezes and the particles show Pattern forming, yet Energy given out keeps rising.
- (Extra, beyond the syllabus) Set Mass of stearic acid to 40 g and press Play: the flat part lasts about 816 s, not 408 s.
The simulation does not model evaporation.