Skip to content

Cambridge IGCSE Physics (0625) · Thermal physics

Specific heat capacity

2.2.2

Core: a rise in an object's temperature means its internal energy has increased. Supplement: the particle explanation, the definition of specific heat capacity, the equation c = ΔE/(mΔθ) to recall and use, and experiments to measure c for a solid and a liquid.

Loading simulation…

Symbols match your course. Open the full specific heat capacity simulation for more presets and teacher tools.

What this topic covers

Give equal masses of water and cooking oil the same amount of energy, and the oil's temperature rises roughly twice as much. Specific heat capacity explains why.

Temperature and internal energy (Core)

Heating an object transfers energy to it. When its temperature rises, its internal energy, the energy of all its particles, has increased. A pot of rice at 90 °C has more internal energy than the same pot at 30 °C.

Temperature and particles (Supplement)

Particles are always moving, at a range of speeds. A rise in temperature means that the average kinetic energy of all the particles has increased. In a solid they vibrate more vigorously; in a liquid or a gas they move around faster.

Specific heat capacity (Supplement)

Specific heat capacity, cc, is the energy needed per unit mass per unit rise in temperature: the joules that warm 1 kg of a material by 1 °C. Learn the equation:

c=ΔEm ΔθsoΔE=mc Δθc = \frac{\Delta E}{m\,\Delta\theta} \qquad\text{so}\qquad \Delta E = mc\,\Delta\theta

Here ΔE\Delta E is the energy transferred in J, mm the mass in kg and Δθ\Delta\theta the temperature change in °C, so cc is in J/(kg °C) (or J/(g °C)).

Water's value, about 4200 J/(kg °C), is unusually high; aluminium's is about 900 and copper's about 390. With equal energy, 1 kg of copper heats up more than ten times as much as 1 kg of water. Storing so much energy per kilogram per degree makes water ideal for central heating and hot-water bottles.

Worked example 1: a water heater (Supplement)

An electric hot-water tank in a flat in Amman warms 90 kg of water from 12 °C to 57 °C. Find the energy gained, using cc = 4200 J/(kg °C).

ΔE=mc Δθ=90×4200×(57−12)=17 010 000 J\Delta E = mc\,\Delta\theta = 90 \times 4200 \times (57 - 12) = 17\,010\,000\ \text{J}

Answer: about 1.7×1071.7 \times 10^7 J (17 MJ).

Worked example 2: a lab result (Supplement)

A 40 W heater warms a 1.00 kg aluminium block for 600 s, and the thermometer rises from 21.0 °C to a peak of 46.0 °C.

ΔE=Pt=40×600=24 000 Jc=ΔEm Δθ=24 0001.00×25.0=960 J/(kg °C)\Delta E = Pt = 40 \times 600 = 24\,000\ \text{J} \qquad c = \frac{\Delta E}{m\,\Delta\theta} = \frac{24\,000}{1.00 \times 25.0} = 960\ \text{J/(kg °C)}

Answer: 960 J/(kg °C), above the usual 900 J/(kg °C). Some energy escaped to the surroundings instead of warming the block, so Δθ\Delta\theta came out too small and cc too large.

Measuring specific heat capacity (Supplement)

A solid. Weigh a metal block that has two holes. Fit an immersion heater into one and a thermometer into the other, with a few drops of oil around the bulb for good thermal contact, and wrap the block in insulation. Note the starting temperature and switch on. Measure the energy with a joulemeter, or with a voltmeter, an ammeter and a stopwatch using E=IVtE = IVt. After a few minutes switch off, but go on reading the thermometer until it stops rising, and note the peak.

A liquid. Find its mass by weighing an insulated container, such as a polystyrene cup, empty and then filled. Keep the heater fully covered, stir gently throughout, and take the same readings.

Insulation, a lid and stirring all improve the result.

Simulation tasks

In the simulation above, the sample is a 1.00 kg Aluminium block, Lagged, with a 50 W heater and the Heater timer at 10 min. The heater is already on (Heater on), and Results gains a reading every minute.

  1. (Core) Press Play. As the temperature climbs, so does the Internal (thermal) energy of the aluminium block.
  2. (Supplement) At 600 s the timer cuts the heater after 30000 J, yet the temperature creeps up a little more. When the run ends, the box headed From the first reading and the highest temperature uses the peak of 52.2 °C to give 932 J/(kg °C), 3.5% above the accepted 900.
  3. (Supplement) Set Heat a second sample beside it to Water and press Play again. With equal energy, by switch-off the aluminium has warmed by about 32 °C, the water by only about 7 °C.
  4. (Supplement) Set Insulation to None and run again: that box now shows 1030 J/(kg °C). The ideal No losses setting gives 901.

Equations

  • Specific heat capacity

    Learn this · Supplement

    ΔE=mcΔθ

    change in thermal energy = mass × specific heat capacity × temperature change

    Open calculator →

Common mistakes

  • Treating temperature and internal energy as the same thing. A full bath of warm water has far more internal energy than a cup of boiling water, because it contains so many more particles.
  • (Supplement) Using a final temperature instead of the temperature change. Water heated from 20 °C to 70 °C has Δθ = 50 °C, not 70 °C.
  • (Supplement) Leaving the mass in grams. With c in J/(kg °C), 250 g must be written as 0.250 kg.
  • (Supplement) Forgetting to change kJ into J. A heater that supplies 12 kJ has given 12 000 J.
  • (Supplement) Saying that energy losses make a measured specific heat capacity too small. The losses make the temperature rise smaller, so the calculated value of c comes out too large.
  • (Supplement) Reading the final temperature at the moment the heater is switched off. The thermometer keeps rising for a while, so record the highest reading.

Exam-style questions

Original questions written in the style of Cambridge IGCSE. Try each one before you reveal the answer.

  1. 1.A pan of soup is heated on a stove. Its temperature rises from 20 °C to 70 °C.

    1. (a)State what happens to the internal energy of the soup.

      1 mark
      Show the answer

      Answer: It increases.

      Marking points

      • increases
    2. (b)(Supplement) Describe what happens to the particles of the soup as its temperature rises.

      2 marks
      Show the answer

      Answer: The average kinetic energy of the particles increases, so on average they move faster.

      Marking points

      • average kinetic energy (of the particles) increases
      • (all the) particles move faster on average
    3. (c)(Supplement) Define specific heat capacity.

      2 marks
      Show the answer

      Answer: The energy needed per unit mass per unit rise in temperature: the energy that warms 1 kg of it by 1 °C.

      Marking points

      • energy (needed) per unit mass / per kg
      • per unit (1 °C) rise in temperature
  2. 2.A hot-water bottle contains 1.2 kg of water at 65 °C. Overnight, the water cools to 25 °C. Water has a specific heat capacity of 4200 J/(kg °C).

    1. (a)(Supplement) Calculate the energy transferred from the water as it cools.

      3 marks
      Show the answer

      Answer: Δθ = 65 − 25 = 40 °C, so ΔE = mcΔθ = 1.2 × 4200 × 40 = 201 600 J ≈ 2.0 × 10⁵ J

      Marking points

      • Δθ = 40 °C
      • 1.2 × 4200 × 40 seen
      • 201 600 J / 2.0 × 10⁵ J
    2. (b)(Supplement) Suggest why water is a good liquid to use in a hot-water bottle.

      1 mark
      Show the answer

      Answer: Water has a high specific heat capacity, so each kilogram releases a lot of energy for every degree it cools.

      Marking points

      • high specific heat capacity, so it stores / gives out a lot of energy per kg per °C
  3. 3.A student measures the specific heat capacity of copper using a 1.00 kg copper block with two holes in it, an electric immersion heater, a thermometer and a joulemeter.

    1. (a)(Supplement) Describe how the student carries out the experiment.

      4 marks
      Show the answer

      Answer: Insert the heater and the thermometer into the two holes and insulate the block. Note the starting temperature. Switch on and use the joulemeter to measure the energy supplied. Switch off after a few minutes and note the highest temperature that the thermometer reaches.

      Marking points

      • heater and thermometer placed in the holes (block insulated)
      • starting temperature recorded
      • energy supplied measured with the joulemeter
      • highest (final) temperature recorded after switching off
    2. (b)(Supplement) The heater has a power of 36 W and is switched on for 300 s. Calculate the energy it supplies.

      2 marks
      Show the answer

      Answer: ΔE = Pt = 36 × 300 = 10 800 J

      Marking points

      • 36 × 300 seen
      • 10 800 J
    3. (c)(Supplement) The temperature rises from 19.5 °C to 46.5 °C. Calculate the specific heat capacity of copper from these results.

      2 marks
      Show the answer

      Answer: c = ΔE ÷ (mΔθ) = 10 800 ÷ (1.00 × 27.0) = 400 J/(kg °C)

      Marking points

      • 10 800 ÷ (1.00 × 27.0) seen
      • 400 J/(kg °C)
    4. (d)(Supplement) The accepted value for copper is about 390 J/(kg °C). Explain why the student's value is higher.

      2 marks
      Show the answer

      Answer: Some energy from the heater is lost to the surroundings, so the temperature rise is smaller than it would be with no losses. Dividing by a smaller Δθ gives a larger value of c.

      Marking points

      • energy lost to the surroundings (by heating)
      • temperature rise smaller (than expected), so calculated c larger
  4. 4.A student heats 0.200 kg of cooking oil in an insulated cup. A joulemeter shows that 12 000 J is supplied, and the temperature of the oil rises from 20.0 °C to 50.0 °C.

    1. (a)(Supplement) Calculate the specific heat capacity of the cooking oil.

      3 marks
      Show the answer

      Answer: Δθ = 30.0 °C, so c = 12 000 ÷ (0.200 × 30.0) = 2000 J/(kg °C)

      Marking points

      • Δθ = 30.0 °C
      • 12 000 ÷ (0.200 × 30.0) seen
      • 2000 J/(kg °C)
    2. (b)(Supplement) State why the student stirs the oil during the experiment.

      1 mark
      Show the answer

      Answer: So that the oil is at the same temperature throughout and the thermometer reading is representative.

      Marking points

      • to keep the temperature even throughout the oil
    3. (c)(Supplement) The same energy is supplied to 0.200 kg of water, of specific heat capacity 4200 J/(kg °C). Calculate the temperature rise of the water.

      2 marks
      Show the answer

      Answer: Δθ = ΔE ÷ (mc) = 12 000 ÷ (0.200 × 4200) = 14.3 °C

      Marking points

      • 12 000 ÷ (0.200 × 4200) seen
      • 14.3 °C

Quick check

6 questions

  1. 1.The temperature of a metal block rises. What happens to its internal energy?
  2. 2.(Supplement) Which of these is a unit of specific heat capacity?
  3. 3.(Supplement) The specific heat capacity of water is 4200 J/(kg °C). How much energy raises the temperature of 2.0 kg of water by 5.0 °C?
  4. 4.(Supplement) Blocks of equal mass are each given the same amount of energy. Which block has the largest rise in temperature?
  5. 5.(Supplement) A student's measured specific heat capacity is higher than the accepted value. What is the most likely reason?
  6. 6.(Supplement) Which statement describes what happens to the particles of a solid when its temperature rises?