What this topic covers
Acceleration describes how quickly an object's velocity changes. Most of this page is Supplement content for Extended candidates. Two ideas are Core and everyone needs them.
Defining acceleration (Supplement)
Acceleration is the change in velocity that happens in each unit of time. You must recall this equation:
Here is the change in velocity in m/s, found by taking the final velocity minus the starting velocity, and is the time the change takes in seconds. The unit of acceleration is metres per second squared, written m/s². An acceleration of 3 m/s² means the velocity grows by 3 m/s during every second.
Acceleration has a direction, so it is a vector, just like velocity.
Slowing down: negative acceleration (Supplement)
If the velocity gets smaller, the final velocity is less than the starting one, so comes out negative and so does . A deceleration is simply a negative acceleration. A car that "decelerates at 2.0 m/s²" has an acceleration of −2.0 m/s². In a calculation, keep the minus sign all the way through and then explain what it means in words.
Reading acceleration from a graph (Supplement)
On a speed–time graph, the gradient is the acceleration:
- a straight line sloping up shows a constant acceleration
- a steeper straight line shows a larger acceleration
- a curved line shows the acceleration is changing
- a line sloping down shows a deceleration, with a negative gradient
Core students should still be able to say, from the shape alone, when an object is speeding up and when it is slowing down.
Falling freely (Core)
Drop a stone and it speeds up as it falls. Near the Earth's surface, with air resistance too small to matter, every falling object gains speed at the same rate: about 9.8 m/s². That is the acceleration of free fall, given the symbol . It stays almost constant close to the ground. What happens when air resistance does matter, including terminal velocity, is covered in the free-fall topic.
Worked example 1: joining a motorway (Supplement)
A car on a German autobahn slip road speeds up from 12 m/s to 30 m/s in 7.5 s. Calculate its acceleration.
Given: starting velocity 12 m/s, final velocity 30 m/s, so m/s. Time s.
Equation and substitution:
Answer: m/s².
Worked example 2: a metro train braking (Supplement)
A metro train in Dubai slows from 22 m/s to rest in 11 s.
The minus sign shows the train is slowing down. Its deceleration is 2.0 m/s².
Worked example 3: a falling stone (Supplement)
A stone falls from rest for 1.5 s with negligible air resistance. Rearranging gives m/s, so its speed is about 15 m/s.
Try it in the simulation
In the simulation above, choose Custom, set a positive acceleration and press play. The acceleration–time graph stays flat at your value, while the velocity–time graph becomes a straight line. Measure its gradient: rise divided by run gives back the acceleration you chose.
Next, pick Braking. Watch the acceleration readout show a negative number while the velocity readout falls towards zero. When the car stops, the acceleration drops to zero too: brakes can bring a car to rest, but they cannot drive it in reverse.