Skip to content

Punjab Board Class 9 Physics · Kinematics

Speed and velocity

Section 2.5

Speed is the distance covered in unit time and is a scalar; velocity is the net displacement in unit time and is a vector. Both are measured in m s⁻¹. Average speed = total distance covered ÷ total time taken.

Loading simulation…

Symbols match your course. Open the full motion graphs simulation for more presets and teacher tools.

Speed: how fast, whichever way

Speed tells you how much distance a body covers in unit time. It says nothing about the direction of travel, so speed is a scalar quantity. If a body covers a distance SS in time tt, its speed vv is

v=StorS=vtv = \frac{S}{t} \qquad \text{or} \qquad S = vt

The SI unit of speed is metre per second, written m s−1\text{m s}^{-1}. On Pakistani roads and in the news you will mostly see kilometres per hour, km h−1\text{km h}^{-1}. To change km h−1\text{km h}^{-1} into m s−1\text{m s}^{-1}, multiply by 1000 and divide by 3600. That is the same as multiplying by 518\tfrac{5}{18}, so 36 km h−1=10 m s−136\ \text{km h}^{-1} = 10\ \text{m s}^{-1}.

Instantaneous speed and average speed

Sit in a rickshaw crossing Lahore at rush hour and keep an eye on its speedometer. The needle climbs, falls to zero at a signal, then rises again. The reading at one particular moment is the instantaneous speed.

For a complete trip we usually quote the average speed:

vav=total distance coveredtotal time takenv_{av} = \frac{\text{total distance covered}}{\text{total time taken}}

Every second of the trip goes into the total time, including the minutes spent standing still in a jam.

Worked numerical

A rickshaw covers 6 km in 15 minutes. It is then stuck in traffic for 9 minutes, and finally covers another 3 km in 6 minutes. Find its average speed in m s−1\text{m s}^{-1}.

Data: total distance S=6+3=9 km=9000 mS = 6 + 3 = 9\ \text{km} = 9000\ \text{m}, total time t=15+9+6=30 min=1800 st = 15 + 9 + 6 = 30\ \text{min} = 1800\ \text{s}

Formula: vav=Stv_{av} = \dfrac{S}{t}

Substitution: vav=9000 m1800 sv_{av} = \dfrac{9000\ \text{m}}{1800\ \text{s}}

Answer: vav=5 m s−1v_{av} = 5\ \text{m s}^{-1}, which is 18 km h−118\ \text{km h}^{-1}

The two moving stretches had speeds of 24 km h−124\ \text{km h}^{-1} and 30 km h−130\ \text{km h}^{-1}. Taking the mean of those two numbers gives 27, which is wrong. It ignores the waiting time, and the two stretches lasted for different lengths of time.

Velocity: speed in a stated direction

Velocity is the net displacement of a body per unit time, that is, the rate of change of displacement. Displacement has a direction, so velocity is a vector quantity. Its SI unit is also m s−1\text{m s}^{-1}.

vav=dtv_{av} = \frac{d}{t}

Here dd is the displacement: the straight-line distance from the starting position to the final position, together with its direction. A coach moving due north along a straight road at 100 km h−1100\ \text{km h}^{-1} has a speed of 100 km h−1100\ \text{km h}^{-1}. Its velocity is 100 km h−1100\ \text{km h}^{-1} due north.

The two quantities can give very different answers. An athlete who runs one complete lap of a 400 m track in 80 s has an average speed of 5 m s−15\ \text{m s}^{-1}. The lap ends at the starting line, so the displacement is zero and the average velocity is zero too.

Uniform and non-uniform velocity

A body moves with uniform velocity when neither its speed nor its direction changes. It then covers equal displacements in equal intervals of time, however short those intervals are. A goods train running along a long straight section of track at a steady speed is close to this.

If the speed changes, or the direction changes, or both change, the velocity is non-uniform, also called variable velocity. A rickshaw circling a roundabout at a steady speed still has a changing velocity, because the direction of motion keeps turning.

Try it in the simulation

The simulation above uses the same symbols as your textbook: SS for distance, tt for time and viv_i for the starting velocity. Choose Steady. The car moves at 8 m s−18\ \text{m s}^{-1}, and the position dots are evenly spaced because equal distances are covered in equal times. Pause at any moment after the start and divide the SS reading by the tt reading. You should get 8, or very close to it, every time.

Now choose Speeding up and watch the gaps between the dots widen. The velocity is no longer uniform. Because the car only travels forwards along a straight road, its distance covered equals the size of its displacement, and its speed equals the size of its velocity.

Equations

Common mistakes

  • Finding average speed by taking the mean of the speeds of separate parts of a trip, instead of dividing the total distance by the total time.
  • Leaving out the time spent stopped (at a signal or a station) when adding up the total time.
  • Converting km h⁻¹ to m s⁻¹ by multiplying by 3.6. To go from km h⁻¹ to m s⁻¹, multiply by 5/18 (divide by 3.6).
  • Giving a velocity as a number and unit only, with no direction, or calling speed a vector.
  • Assuming that constant speed always means uniform velocity. If the direction changes, as on a curved road, the velocity changes too.
  • Using the total distance instead of the displacement when asked for average velocity.

Exam-style questions

Original questions written in the style of Punjab board exams. Try each one before you reveal the answer.

  1. 1.Speed and velocity are both measured in m s⁻¹, but they are different physical quantities.

    1. (a)Define speed and state whether it is a scalar or a vector quantity.

      2 marks
      Show the answer

      Answer: Speed is the distance covered by a body in unit time (v = S/t). It is a scalar quantity.

      Marking points

      • Distance covered per unit time (or v = S/t)
      • Scalar quantity
    2. (b)Define velocity.

      1 mark
      Show the answer

      Answer: Velocity is the net displacement of a body in unit time (the rate of change of displacement).

      Marking points

      • Net displacement per unit time, or rate of change of displacement
    3. (c)Differentiate between uniform velocity and non-uniform velocity.

      2 marks
      Show the answer

      Answer: Uniform velocity: both the speed and the direction of the body stay the same. Non-uniform (variable) velocity: the speed changes, or the direction changes, or both change.

      Marking points

      • Uniform: speed and direction both constant
      • Non-uniform: speed or direction (or both) changes
  2. 2.A passenger train covers 324 km between two cities in 3 hours.

    1. (a)Calculate the average speed of the train in km h⁻¹.

      2 marks
      Show the answer

      Answer: Average speed = total distance ÷ total time = 324 km ÷ 3 h = 108 km h⁻¹

      Marking points

      • Uses average speed = total distance ÷ total time
      • 108 km h⁻¹
    2. (b)Express this average speed in m s⁻¹.

      2 marks
      Show the answer

      Answer: 108 × 1000 m ÷ 3600 s = 30 m s⁻¹

      Marking points

      • Converts km to m and h to s (× 1000 ÷ 3600, or × 5/18)
      • 30 m s⁻¹
    3. (c)At some moments the train's speedometer shows a reading greater than this average. Explain why.

      2 marks
      Show the answer

      Answer: The speedometer shows instantaneous speed. The train goes slowly or stops at times (for example at stations), so at other times it must move faster than its average speed.

      Marking points

      • Speedometer shows instantaneous speed (the speed at that moment)
      • The train is slower or stopped at some times, so at other times its speed is above the average
  3. 3.A cyclist rides 900 m due east in 150 s, then turns round and rides 300 m due west in 90 s.

    1. (a)Calculate the average speed of the cyclist for the whole ride.

      3 marks
      Show the answer

      Answer: Total distance = 900 + 300 = 1200 m. Total time = 150 + 90 = 240 s. Average speed = 1200 ÷ 240 = 5 m s⁻¹

      Marking points

      • Total distance = 1200 m
      • Total time = 240 s
      • Average speed = 5 m s⁻¹
    2. (b)Calculate the average velocity of the cyclist for the whole ride.

      3 marks
      Show the answer

      Answer: Displacement = 900 − 300 = 600 m due east. Average velocity = 600 m ÷ 240 s = 2.5 m s⁻¹ due east

      Marking points

      • Displacement = 600 m
      • Average velocity = 600 ÷ 240 = 2.5 m s⁻¹
      • Direction given as due east
  4. 4.An aeroplane flies in a straight line due south at a steady 720 km h⁻¹ for 2 minutes.

    1. (a)State the speed and the velocity of the aeroplane.

      2 marks
      Show the answer

      Answer: Speed = 720 km h⁻¹. Velocity = 720 km h⁻¹ due south.

      Marking points

      • Speed = 720 km h⁻¹ (no direction needed)
      • Velocity = 720 km h⁻¹ with direction due south
    2. (b)Calculate the distance the aeroplane covers in the 2 minutes, in metres.

      2 marks
      Show the answer

      Answer: v = 720 × 5/18 = 200 m s⁻¹; t = 120 s; S = vt = 200 × 120 = 24 000 m

      Marking points

      • Converts to 200 m s⁻¹ and 120 s
      • S = vt = 24 000 m
    3. (c)Is the velocity of the aeroplane uniform? Give a reason.

      1 mark
      Show the answer

      Answer: Yes, because both its speed and its direction stay the same.

      Marking points

      • Yes: speed and direction both constant

Quick check

6 questions

  1. 1.The SI unit of velocity is:
  2. 2.A car is moving at 126 km h⁻¹. Its speed in m s⁻¹ is:
  3. 3.The reading on a vehicle's speedometer at any moment gives its:
  4. 4.An athlete runs exactly one lap of a 400 m track in 50 s and finishes at the starting line. The athlete's average velocity is:
  5. 5.A body is said to have uniform velocity when:
  6. 6.Which one of these is a vector quantity?