Skip to content

Motion simulation

Motion Graphs Simulation

Drive a car along a straight road and watch its distance–time, velocity–time and acceleration–time graphs draw themselves. Use the tangent tool and the shaded area to see what gradients and areas really mean.

Loading simulation…
Show symbols for

Predict first

Question 1 of 4

A car brakes steadily from 20 m/s. What will its velocity–time graph do after the car has stopped?

Try this

  1. 1Choose Steady. Predict the shape of each graph before you press play, then check.
  2. 2Choose Braking. Watch the velocity–time line reach zero and stay there. Why doesn't it go below the axis?
  3. 3Drag across the distance–time graph to draw a tangent. Compare its gradient with the velocity readout at the same time.
  4. 4Choose Custom, set the starting velocity to 10 m/s and change the acceleration while the car is moving. Watch the gradient of the velocity–time graph change at the same moment.
  5. 5Turn on the position dots. Find a part of the journey where the gaps between dots stay the same, and explain what that tells you.

What this simulation shows

A car moves along a straight road. As it moves, three graphs draw themselves in real time: distance against time, velocity against time and acceleration against time. Because the graphs and the car move together, you can connect every bend in a line to something you can see the car doing.

The car only drives forwards in this simulation, so its distance travelled and its displacement are the same. That keeps the graphs simple while you learn to read them.

Reading the three graphs

Each graph answers a different question about the same journey.

  • The distance–time graph tells you where the car is. A steeper line means the car is covering ground faster.
  • The velocity–time graph tells you how fast the car is going at each moment. A line sloping upwards means the car is speeding up.
  • The acceleration–time graph tells you how quickly the velocity is changing. In this simulation the acceleration only changes in sudden steps, so this graph is made of flat sections.

Choose the Journey motion and play it. The car speeds up, cruises, then brakes. Watch how the same three stages appear on every graph in a different shape.

Gradients and areas

Two ideas unlock almost every motion graph question.

The gradient of one graph gives you the quantity on the graph below it. The gradient of the distance–time graph is the velocity. The gradient of the velocity–time graph is the acceleration. Drag your finger or mouse across a graph to draw a tangent and read off its gradient. Then compare the value with the readouts under the road.

The area under one graph gives you the change in the quantity above it. The area under the velocity–time graph is the distance travelled. Turn on the shading and watch the area grow as the car moves. The number under the graphs is the shaded area, and it always matches the distance readout.

Why the braking car stops at zero

When a car brakes, the acceleration acts against the motion. If the brakes stayed on and nothing else changed, the maths would say the car speeds up backwards. Real brakes cannot push a car backwards, so the simulation stops the car when its velocity reaches zero. On the velocity–time graph the line meets the time axis and stays on it, and on the acceleration–time graph the acceleration drops to zero at the same moment.

The position dots

The orange dots mark where the car was every half second, like the dots on a ticker tape. Even spacing means a constant speed. Gaps that grow mean the car is speeding up. Gaps that shrink mean it is slowing down. This is a quick way to describe a motion before you even look at a graph.

Symbols in your course

Different syllabuses use different letters for the same quantities. Use the switch under the simulation to show the symbols from your course. For example, some write the starting velocity as uu, others as v0v_0 or viv_i. The physics, and the graphs, stay exactly the same.

Equations

  • Speed, distance and time

    s=vt

    distance travelled = speed × time

    Open calculator →
  • Acceleration

    a=Δvt

    acceleration = change in velocity ÷ time taken

    Open calculator →
  • Uniform acceleration (v² − u² = 2as)

    v=u2+2as

    (final velocity)² − (initial velocity)² = 2 × acceleration × distance

    Open calculator →
  • Final velocity (v = u + at)

    v=u+at

    final velocity = initial velocity + acceleration × time

    Open calculator →
  • Distance under uniform acceleration (s = ut + ½at²)

    s=ut+12at2

    distance = initial velocity × time + 0.5 × acceleration × (time)²

    Open calculator →

Check your understanding

8 questions

  1. 1.What does the gradient of a distance–time graph show?
  2. 2.A velocity–time graph is a horizontal line above the time axis. What is the car doing?
  3. 3.On a velocity–time graph the line rises steadily from 0 to 12 m/s in 4 s. What is the acceleration?
  4. 4.What does the area under a velocity–time graph represent?
  5. 5.A car moves at a steady 10 m/s for 6 s. How far does it travel?
  6. 6.A distance–time graph is a curve that gets steeper. What is happening?
  7. 7.A car braking at 4 m/s² slows from 20 m/s to rest. How long does it take to stop?
  8. 8.In the simulation the dots mark the car's position every 0.5 s. The gaps between the dots get smaller. What is the car doing?

For teachers

Embed it in your site or open it full-screen for the projector.

Read more