What this simulation shows
A car is cruising along a straight road when the driver spots an obstacle ahead. Press play and watch the stop happen in two stages. First the car carries on at full speed while the driver reacts, across the stretch marked as the thinking section. Then the brake lights come on and the car slows steadily until it is at rest, across the braking section. Together the two sections make up the stopping distance, and the readouts under the road give each length.
Thinking distance: speed × reaction time
Nothing slows the car until the driver's foot reaches the pedal, so for the whole reaction time it keeps a constant speed. That makes the thinking distance simply the speed multiplied by the reaction time. Change the driver from Alert to Tired, Distracted or After alcohol and only the thinking section stretches. The preset times are example values picked for the model: real people differ, and one person can be quicker or slower from day to day.
Braking distance: speed squared over twice the deceleration
Once the brakes act, the simulation treats the deceleration as constant. Setting the final speed to zero in gives
where is the speed when braking begins and is the size of the deceleration. The speed is squared, so braking distance grows far faster than thinking distance as the car goes quicker. The graph under the road shows this: the thinking line is straight, while the braking curve bends upwards. The Double the speed table further down doubles your current speed so you can check the factor of two and the factor of four yourself.
Each road surface sets a typical deceleration: roughly 7 m/s² when dry, 4.5 m/s² when wet and 1.5 m/s² on ice. These are rounded values for the model, not measurements of any particular car. Choose Custom to enter the deceleration from an exam question instead.
Force, mass and energy
Switch the braking to Force and mass to see where the deceleration comes from. Newton's second law says , so a heavier car with the same braking force slows more gently and needs further to stop. The energy check shows the same idea another way: the work done by the brakes, force times braking distance, always matches the starting kinetic energy, . If the deceleration goes above the model's dry-road value, a warning appears, because a real car might not have enough grip and could skid.
Does the car stop in time?
The obstacle is already on the road when the simulation opens. Slide it nearer or further away. The verdict appears in the readouts before you press play, so make a prediction first and then watch. If the car cannot stop, the simulation works out how fast it is still going when it reaches the obstacle. Small increases in speed have startling effects here, because the extra speed lengthens both sections at once. The graph also marks the fastest speed that would still stop short.
Measure your own reaction time
The reaction-time test times five goes and puts the average into the reaction-time slider. Presses before the light changes do not count. Expect a shorter time than a driver would manage on a real road, where the danger has to be noticed first and the foot then moved across to the brake.
Symbols in your course
The switch under the simulation shows the symbols your syllabus uses, for example , or for the starting speed. The numbers stay the same.