Skip to content

Motion simulation

Distance and Displacement Simulation

An illustrated park, a 400 m running track and a school corridor. Build a route, watch a walker follow it, and compare the tape-measure distance with the bold displacement arrow, its direction, its sign along a line and the two averages.

Loading simulation…
Show symbols for

Predict first

Question 1 of 4

A student walks 30 m east, then turns and walks 40 m north. At the end, how do the distance travelled and the size of the displacement compare?

Try this

  1. 1Press Walk to replay the L-shaped walk. Along the first leg the distance and displacement bars under the readouts stay level, then they split at the corner. What are the two values at the finish, and why can the displacement never catch up?
  2. 2Turn on East and north parts and check that √(30² + 40²) gives the value on the Displacement card. Then flip Direction as between Bearing and Angle from E–W: how do the two ways of describing the same arrow differ?
  3. 3Choose Round the running track (400 m) from the Example list. As the runner goes round, the orange arrow stretches, swings and finally vanishes on the finish line. Roughly where in the lap is the displacement at its largest?
  4. 4Press Line under the stage to switch to the corridor, then press Walk. Read the average speed and the average velocity when the walker is back at the stairs. Now set Stop at each turn to 10 s and walk again: which of the two values changes?
  5. 5Press Map, then Clear, and build your own route by tapping the map or with Next leg and Add this leg. Can you make a walk of at least 100 m that finishes with a displacement of exactly zero?

Two ways to measure one journey

Every walk in this simulation is measured twice. The yellow tape measure in the corner pays out tape for every metre the walker covers, so it records the distance travelled: the full length of the route, bends and all. The bold orange arrow ignores the route completely. It always points from the start to wherever the walker is standing now, and its length and direction together make up the displacement. Distance is a scalar, so one number with a unit says everything about it. Displacement is a vector, so it needs a direction as well.

Why the arrow can never beat the tape

Along the first straight leg the arrow and the tape grow at the same rate, and the two bars under the readouts stay level. The moment the path turns, the tape keeps climbing while the arrow cuts the corner, so the bars split apart. A straight line is the shortest route between two points, which is why the size of the displacement can match the distance but never exceed it. A match needs one straight run with no doubling back. Finish where you began, as on the running track, and the arrow shrinks to nothing even though the tape reads 400 m.

Giving a direction

On the map, a direction can be written in several ways, and the Direction as switch moves between them. A three-figure bearing is measured clockwise from north, so 090° is due east and 323° points roughly north-west. An angle can instead be measured from the east–west line towards north or south, such as 53.1° north of east, or from the north–south line towards east or west, such as 36.9° east of north, which is how the Punjab book gives map directions. All three describe the same arrow; what matters is saying which line the angle starts from. Turn on East and north parts to see the arrow split into two dashed sides of a right-angled triangle. For the L-shaped walk these are 30 m and 40 m, so

302+402=50 m\sqrt{30^2 + 40^2} = 50\ \text{m}

Signs along a corridor

In straight-line mode the walker paces up and down a school corridor that runs from west to east. With east counted as positive, a displacement of −8 m means 8 m west of the stairs. Each leg is drawn on its own row above the corridor, so every turn is easy to spot, and the graph puts both quantities on one set of axes. The distance line can level off while the walker waits, but it never slopes downwards. The displacement line rises, falls and can dip below zero.

Speed, velocity and stops

The walker keeps a steady pace, using typical values of 1.5 m/s on foot, 3 m/s for a jog and 6 m/s on a bicycle. Two averages are worked out live:

average speed=distance travelledtime takenaverage velocity=displacementtime taken\text{average speed} = \frac{\text{distance travelled}}{\text{time taken}} \qquad \text{average velocity} = \frac{\text{displacement}}{\text{time taken}}

On a round trip the first equals the pace and the second is zero. A stop at each turn adds time without adding distance, so the average speed falls. The average velocity falls too, unless it is already zero. Long journeys play as a time-lapse, but the clock always shows the real journey time, so the averages stay correct.

AQA and Cambridge both ask for average speed from the total distance and the total time. The Punjab Class 9 book also defines average velocity as displacement divided by time. To combine displacements at any angle, try the vector addition simulation, and for gradients and areas on motion graphs, open the motion graphs simulation.

Equations

Check your understanding

8 questions

  1. 1.A runner completes exactly two laps of a 400 m track and finishes on the line where they started. What is the runner's displacement?
  2. 2.Which pair is made up of one scalar quantity and one vector quantity?
  3. 3.A cyclist rides 120 m west and then 50 m south. How far is the cyclist from the starting point, measured in a straight line?
  4. 4.Taking north as positive, a dog runs 18 m north and then 25 m south. What is the dog's displacement?
  5. 5.A student walks 600 m to a shop in 400 s and 600 m home again in 500 s. What is the average speed for the whole trip?
  6. 6.What does a horizontal section of a distance–time graph show?
  7. 7.Which statement about the size of a displacement is always true?
  8. 8.A walker goes 40 m east and then 30 m west, taking 50 s altogether. What is the walker's average velocity?

For teachers

Embed it in your site or open it full-screen for the projector.

Read more