Skip to content

How to Calculate Acceleration: Formula, Units, Deceleration and Graphs

Learn the acceleration equation in your course's symbols, what m/s² means, why slowing down gives a negative answer, how to read acceleration from the gradient of a velocity–time graph, and how to use a = F/m when you know the resultant force and the mass.

Published · 7 min read

On this page

To calculate acceleration, divide the change in velocity by the time taken for that change:

a=Δvt=v−uta = \frac{\Delta v}{t} = \frac{v - u}{t}

Here u is the velocity at the start and v is the velocity at the end, both in metres per second (m/s). The time t is in seconds (s), so the acceleration a comes out in metres per second squared (m/s²). Always find the change as final minus initial. If an object moving forwards is slowing down, the answer is negative, and we call it a deceleration.

There are two other common routes. On a velocity–time graph, the acceleration is the gradient of the line. And if you know the resultant force and the mass, you can use a=F/ma = F/m.

What does acceleration mean?

Acceleration tells you how quickly velocity changes. If an object's acceleration is 3 m/s², its velocity goes up by 3 m/s in each second. A scooter starting from rest at 3 m/s² is moving at 3 m/s after 1 s, 6 m/s after 2 s and 9 m/s after 3 s.

Velocity includes a direction, so acceleration does too. An object accelerates when its speed changes, when its direction changes, or both. This guide sticks to motion in a straight line, where only the speed changes, and takes the direction of motion as positive.

Which symbols does your course use?

The physics is the same in every course, but the letters differ:

  • AQA GCSE: a=Δvta = \dfrac{\Delta v}{t}. Initial velocity is u and final velocity is v.
  • Cambridge IGCSE: a=ΔvΔta = \dfrac{\Delta v}{\Delta t}. The Δ in front of t simply means "the time interval".
  • Punjab Class 9: a=vf−vita = \dfrac{v_f - v_i}{t}, with viv_i for the initial velocity and vfv_f for the final velocity. The book writes the unit as m s⁻², which means exactly the same as m/s².

In exams, write the equation the way your own course does. The rest of this guide uses u and v.

Why is the unit m/s²?

Divide a velocity by a time: (m/s) ÷ s = m/s². Say it as "metres per second, per second". The number tells you how many metres per second are gained, or lost, in each second. Never give m/s as the unit of acceleration. That is the unit of velocity.

How do you calculate acceleration step by step?

  1. Write down u, v and t. If a speed is given in km/h, divide it by 3.6 to get m/s.
  2. Work out Δv = v − u, and keep its sign.
  3. Divide Δv by the time.
  4. Give the unit, m/s², and say whether it is a deceleration.

Worked example 1: a car from 0 to 100 km/h

Car makers often quote how long a car takes to reach 100 km/h from rest. A family car in Johannesburg takes 10 s. Find its average acceleration.

Convert: v=100÷3.6=27.8v = 100 \div 3.6 = 27.8 m/s, and u=0u = 0 because the car starts from rest.

Change in velocity: Δv=27.8−0=27.8\Delta v = 27.8 - 0 = 27.8 m/s

Acceleration: a=27.810=2.78a = \dfrac{27.8}{10} = 2.78 m/s²

Answer: about 2.8 m/s². This is a sensible size for an ordinary car pulling away quickly. Free fall, at about 9.8 m/s², is about three and a half times as large.

Worked example 2: a cyclist braking

A cyclist in Amsterdam slows from 6.0 m/s to 1.5 m/s in 3.0 s as they approach a junction. Find the acceleration.

Change in velocity: Δv=v−u=1.5−6.0=−4.5\Delta v = v - u = 1.5 - 6.0 = -4.5 m/s

Acceleration: a=−4.53.0=−1.5a = \dfrac{-4.5}{3.0} = -1.5 m/s²

Answer: a=−1.5a = -1.5 m/s². The negative sign tells you the cyclist is slowing down, so this is a deceleration of 1.5 m/s².

You can write "an acceleration of −1.5 m/s²" or "a deceleration of 1.5 m/s²". Avoid "a deceleration of −1.5 m/s²": the word and the sign both mean slowing down, so the reader cannot tell which one you intended.

Rearranging the equation

The same equation can find a time or a change in velocity: Δv=at\Delta v = a t and t=Δvat = \dfrac{\Delta v}{a}. For example, a metro train in Delhi pulls away from rest at 0.80 m/s². To reach 24 m/s it needs t=24÷0.80=30t = 24 \div 0.80 = 30 s.

How do you find acceleration from a velocity–time graph?

The acceleration equals the gradient of a velocity–time graph. That is because the gradient is the change in velocity (up the graph) divided by the change in time (along the graph). Choose two points on a straight section, as far apart as you can, and divide the rise by the run.

  • Line sloping up: positive acceleration.
  • Flat line: zero acceleration, so a steady velocity.
  • Line sloping down: negative acceleration. For an object moving forwards, this is a deceleration.
  • Steeper line: a bigger acceleration, whichever way it slopes.

Worked example 3: a bus between two stops

A bus in Nairobi moves along a straight road. Its velocity–time graph is made of straight lines joining these points.

Time (s)010305057
Velocity (m/s)0414140

Find the acceleration from 10 s to 30 s, from 30 s to 50 s, and from 50 s to 57 s.

10 s to 30 s: gradient =14−430−10=1020=0.50= \dfrac{14 - 4}{30 - 10} = \dfrac{10}{20} = 0.50 m/s²

30 s to 50 s: the velocity stays at 14 m/s, so the acceleration is 0.

50 s to 57 s: gradient =0−1457−50=−147=−2.0= \dfrac{0 - 14}{57 - 50} = \dfrac{-14}{7} = -2.0 m/s²

Answer: 0.50 m/s² while it speeds up, zero while it cruises, and −2.0 m/s² as it brakes. The braking line is the steepest, so that acceleration has the biggest size. Notice that 14÷3014 \div 30 would be wrong for the first answer: use the change in velocity, not the velocity at one point.

How can you use a = F/m?

Newton's second law links the acceleration to the resultant force F, in newtons (N), and the mass m, in kilograms (kg):

F=masoa=FmF = m a \quad \text{so} \quad a = \frac{F}{m}

The acceleration and the resultant force always act in the same direction. Be careful to use the resultant force: the forward force minus any friction or air resistance.

Worked example 4: a delivery motorbike

A delivery motorbike and its rider in Dhaka have a total mass of 250 kg. The driving force is 700 N, and friction and air resistance add up to 200 N. Find the acceleration.

Resultant force: F=700−200=500F = 700 - 200 = 500 N

Acceleration: a=Fm=500250=2.0a = \dfrac{F}{m} = \dfrac{500}{250} = 2.0 m/s²

Answer: 2.0 m/s², forwards.

To see deceleration on a graph, open the motion graphs simulation and choose Braking under Motion. The car starts at 20 m/s with an acceleration of −4 m/s², so its velocity–time line slopes down and reaches zero after 5 s. In the force, mass and acceleration simulation, light gates time a card on a trolley, and you can compare the acceleration they give with resultant force ÷ mass. When a question also involves distance, the SUVAT equations simulation can help.

Common mistakes

  • Taking the velocities in the wrong order. Always do final velocity minus initial velocity, v − u.
  • Mixing km/h with seconds. Convert to m/s first, or the answer will not be in m/s².
  • Giving the unit as m/s. Acceleration is in m/s².
  • Losing the minus sign. A slowing object has a negative acceleration.
  • Dividing a single reading by a single time on a graph. The gradient needs a change in velocity over a change in time.
  • Using the driving force in a = F/m. Use the resultant force, after taking away friction and drag.

Key points

  • To find acceleration, divide the change in velocity by the time it takes: a=Δv/ta = \Delta v/t.
  • Its unit is m/s² (written m s⁻² in some books).
  • Work out the change as final minus initial. A negative answer means a deceleration.
  • The gradient of a velocity–time graph gives the acceleration.
  • If you know the resultant force and the mass, a=F/ma = F/m.