Acceleration in the AQA specification
Spec point 4.5.6.1.5 brings in acceleration. Everything on this page is on both tiers. There are two equations, and they have different status, so learn which is which:
- : you must remember this one.
- : this is given on the equation sheet, but you must be able to choose it and use it.
What acceleration means
Acceleration tells you how quickly the velocity is changing. An acceleration of 2 m/s² means the velocity goes up by 2 m/s every second. After 3 s from rest, the object is moving at 6 m/s.
When an object slows down, it is decelerating. Its change in velocity is negative, so the calculated acceleration has a minus sign. A deceleration of 4 m/s² is the same as an acceleration of −4 m/s².
The unit is metres per second squared, m/s². It comes from dividing a velocity in m/s by a time in s.
Equation 1: you must remember this
Here is the acceleration in m/s², is the change in velocity in m/s, and is the time taken in s. Work out as final velocity minus initial velocity, in that order.
Worked example 1: a train leaving a station. A train in Mumbai speeds up from 5.0 m/s to 25 m/s in 40 s. Find its acceleration.
Given: ,
Equation:
Substitution:
Answer:
Equation 2: given on the equation sheet
This links final velocity , initial velocity (both in m/s), acceleration (m/s²) and distance (m). It only works when the acceleration is uniform, meaning constant. Use it when a question gives you a distance but no time.
Worked example 2: an emergency stop. A car travelling at 18 m/s brakes steadily and stops in 27 m. Calculate its deceleration.
Given: , ,
Equation: , so
Substitution:
Answer: , a deceleration of 6.0 m/s².
Worked example 3: a dropped phone. A phone falls from rest through 1.8 m. Air resistance is small enough to ignore, so the acceleration is 9.8 m/s². Calculate its speed just before it hits the floor.
Given: , ,
Equation: (the equation-sheet equation, rearranged)
Substitution:
Answer: (2 significant figures)
Accelerations in everyday life
AQA expects you to estimate everyday accelerations, so learn a few rough values.
| Situation | Rough acceleration |
|---|---|
| Any object falling freely near the Earth's surface | 9.8 m/s² |
| Family car pulling away briskly | about 2 to 3 m/s² |
| Passenger train leaving a station | about 0.5 to 1 m/s² |
For the car, a common figure is 0 to 27 m/s (about 60 mph) in 10 s, which gives about 2.7 m/s². Estimates should be given to one or two significant figures.
Using the simulation
In the simulation above, choose Braking. The car starts at 20 m/s and decelerates at 4 m/s². Predict when it stops using , then check: it halts at 5 s. Rearrange the equation-sheet equation to predict the stopping distance, and compare your answer with the distance readout of 50 m. Then pick Custom, set your own starting velocity and acceleration, and test both equations again. Watch the velocity and acceleration arrows (they are switched on at the start): when the car brakes, the acceleration arrow points backwards, against the motion.