Skip to content

GCSE Physics — AQA · Forces and motion

Distance–time graphs

4.5.6.1.4

Use the slope of a distance–time graph to work out speed, and read stops, steady motion and changing speed from its shape. On the Higher tier, draw a tangent to a curve to find the speed at a chosen time.

Loading simulation…

Symbols match your course. Open the full motion graphs simulation for more presets and teacher tools.

Distance–time graphs for AQA

Spec point 4.5.6.1.4 asks you to plot distance–time graphs from data, explain what each part of the line shows, and use the slope to find speeds. This is on both tiers. Finding the speed of an accelerating object with a tangent is Higher tier only.

The link to s=vts = vt matters here. That equation is one you must remember, and finding the slope of a distance–time graph is the same calculation done on a graph: distance divided by time.

What each shape tells you

Time always goes along the horizontal axis and distance up the vertical axis. Read the shape of the line, not just its height.

Shape of the lineWhat the object is doing
Flat (horizontal)Not moving: the distance stays the same as time passes
Straight and sloping upwardsMoving at a steady speed
Steeper straight lineA higher steady speed
Curving upwards, getting steeperSpeeding up (accelerating)
Curving over, getting flatterSlowing down (decelerating)

The gradient is the speed

For any straight section, pick two points as far apart as you can. Work out how much the distance changes between them and how much the time changes. Then divide:

speed=change in distancechange in time\text{speed} = \frac{\text{change in distance}}{\text{change in time}}

Using points that are far apart makes your reading errors a smaller fraction of the answer.

Worked example 1: a cycle ride with a stop

A cyclist's distance–time graph has three straight sections:

  • 0 s to 30 s: the line rises from 0 m to 180 m.
  • 30 s to 50 s: the line is flat at 180 m.
  • 50 s to 90 s: the line rises from 180 m to 300 m.

Given: first section, change in distance = 180 m, change in time = 30 s

Equation: v=stv = \dfrac{s}{t} (the gradient)

Substitution: v=18030v = \dfrac{180}{30}

Answer: v=6.0 m/sv = 6.0\ \text{m/s}

The flat section shows the cyclist stopped for 20 s, perhaps at a level crossing. In the last section the gradient is 300−18090−50=12040=3.0 m/s\dfrac{300 - 180}{90 - 50} = \dfrac{120}{40} = 3.0\ \text{m/s}. That line is less steep, so the cyclist was slower.

For the whole ride, the average speed is 30090=3.3 m/s\dfrac{300}{90} = 3.3\ \text{m/s} to 2 significant figures. The stop counts as part of the time.

Higher tier: speed at one moment on a curve

When the line curves, the speed is changing, so there is no single gradient. To find the speed at one particular time:

  1. Mark the point on the curve at that time.
  2. Use a ruler to draw a tangent: a straight line that touches the curve at that point and follows its slope there.
  3. Make the tangent long, then find its gradient using two points on the tangent, not on the curve.

Worked example 2. A car's distance–time graph curves upwards. A tangent drawn at 6.0 s passes through (4.0 s, 0 m) and (10.0 s, 36 m).

Equation: speed = gradient of the tangent

Substitution: v=36−010.0−4.0=366.0v = \dfrac{36 - 0}{10.0 - 4.0} = \dfrac{36}{6.0}

Answer: v=6.0 m/sv = 6.0\ \text{m/s} at 6.0 s

Drawing your own graph from measurements

Put time on the x-axis and distance on the y-axis, each with a label and a unit. Choose scales so your points use at least half of the grid. Plot each point as a small neat cross. Then draw one line of best fit: a ruled straight line if the points lie in a line, or a smooth curve if they do not. Never join the dots with short straight pieces.

Using the simulation

In the simulation above, choose Steady and watch the distance–time graph draw a straight line. Its gradient is 8 m/s, the same as the velocity readout. Now choose Speeding up: the line curves upwards. Drag along the distance–time graph until the tangent tool sits at 4 s. It should show a gradient of about 8 m/s, which is the car's speed at that moment. Try 2 s and 6 s too, and notice the gradient grows as the curve gets steeper.

Equations

Common mistakes

  • Reading the speed from the height of the line instead of its gradient.
  • Describing a flat line as 'constant speed'; on a distance–time graph a flat line means the object is stationary.
  • Using two points on a curve (a chord) instead of two points on a tangent when asked for the speed at one instant.
  • Choosing two points very close together, which makes the gradient reading less accurate.
  • Leaving out stationary time when calculating an average speed for a whole journey.
  • Joining plotted points dot-to-dot instead of drawing a single line or smooth curve of best fit.

Exam-style questions

Original questions written in the style of GCSE AQA. Try each one before you reveal the answer.

  1. 1.A runner's distance–time graph is a straight line from (0 s, 0 m) to (25 s, 100 m). From 25 s to 40 s the line is horizontal.

    1. (a)Describe the motion of the runner between 25 s and 40 s.

      1 mark
      Show the answer

      Answer: The runner is stationary (not moving).

      Marking points

      • Stationary / at rest / speed is zero.
    2. (b)Calculate the speed of the runner during the first 25 s.

      2 marks
      Show the answer

      Answer: Speed = gradient = 100 ÷ 25 = 4.0 m/s

      Marking points

      • Speed = 100 ÷ 25
      • 4.0 m/s
    3. (c)A second runner covers the same 100 m in less time. Describe how the line for the second runner would differ.

      1 mark
      Show the answer

      Answer: The line would be steeper (larger gradient).

      Marking points

      • Steeper line / greater gradient.
  2. 2.Higher tier. A car pulls away from traffic lights. Its distance–time graph is a curve that gets steeper. A tangent is drawn at 5.0 s. It passes through (1.0 s, 0 m) and (7.0 s, 60 m).

    1. (a)Explain how the graph shows that the car is accelerating.

      2 marks
      Show the answer

      Answer: The curve gets steeper, so the gradient increases. A distance–time gradient tells you the speed, so the speed is increasing.

      Marking points

      • The gradient (steepness) increases.
      • Gradient represents speed, so the speed is increasing.
    2. (b)Determine the speed of the car at 5.0 s.

      2 marks
      Show the answer

      Answer: Gradient of tangent = (60 − 0) ÷ (7.0 − 1.0) = 60 ÷ 6.0 = 10 m/s

      Marking points

      • Gradient = 60 ÷ 6.0
      • 10 m/s
  3. 3.A student switches on a battery-powered toy car and lets it run across a flat floor. The student records its distance from the start line every second. The results are 0 m at 0 s, 0.40 m at 1.0 s, 0.80 m at 2.0 s, 1.20 m at 3.0 s and 1.60 m at 4.0 s.

    1. (a)The points lie on a straight line through the origin. What does this show about the motion of the toy car?

      1 mark
      Show the answer

      Answer: The toy car moves at a constant speed.

      Marking points

      • Constant (steady) speed.
    2. (b)Calculate the speed of the toy car.

      2 marks
      Show the answer

      Answer: Speed = 1.60 ÷ 4.0 = 0.40 m/s

      Marking points

      • Speed = 1.60 ÷ 4.0 (or any correct pair of points)
      • 0.40 m/s
    3. (c)Suggest one piece of equipment that would let the student measure the times more accurately than a stopwatch.

      1 mark
      Show the answer

      Answer: Light gates connected to a data logger (or a video recording analysed frame by frame).

      Marking points

      • Light gates / data logger / video analysis.
  4. 4.A bus travels 2.4 km along a city route in 8.0 minutes, including two stops.

    1. (a)Calculate the average speed of the bus in m/s.

      3 marks
      Show the answer

      Answer: s = 2400 m and t = 480 s. Average speed = 2400 ÷ 480 = 5.0 m/s

      Marking points

      • Distance converted to 2400 m and time to 480 s
      • Average speed = 2400 ÷ 480
      • 5.0 m/s

Quick check

6 questions

  1. 1.A distance–time graph shows a horizontal line. What is the object doing?
  2. 2.What does the gradient of a distance–time graph represent?
  3. 3.A straight distance–time line rises from 0 m to 60 m in 12 s. What is the speed?
  4. 4.A distance–time graph curves and becomes less steep. What is happening to the object?
  5. 5.Higher tier: how do you find the speed at one instant from a curved distance–time graph?
  6. 6.Two straight lines are drawn on the same distance–time axes. Line P is steeper than line Q. What can you say?