Skip to content

Cambridge IGCSE Physics (0625) · Motion

Distance–time and speed–time graphs

1.2

A distance–time graph shows whether an object is at rest, moving steadily or changing speed, and its gradient gives the speed. The area under a speed–time graph gives the distance travelled.

Loading simulation…

Symbols match your course. Open the full motion graphs simulation for more presets and teacher tools.

Two graphs that tell the story of a journey

Cambridge IGCSE asks you to sketch, plot and read two kinds of motion graph. On both, time goes along the horizontal axis. On a distance–time graph the vertical axis is the distance travelled. On a speed–time graph it is the speed. Everything on this page is Core unless it is marked Supplement.

A sketch only needs the right shape and labelled axes. A plot needs a sensible scale that fills more than half of the grid, axes labelled with quantity and unit, accurately marked points, and a ruled line or a smooth curve through them.

Matching shapes to motion

The same motion looks different on the two graphs. Learn this table well, because examiners love to test the difference.

What the object is doingDistance–time graphSpeed–time graph
At restFlat line: the distance is not changingFlat line lying on the time axis: speed is zero
Moving at constant speedStraight line sloping upwardsFlat line above the time axis
AcceleratingCurve that gets steeperLine sloping upwards
DeceleratingCurve that gets less steepLine sloping downwards

Notice the trap. A flat line on a distance–time graph means the object has stopped. A flat line on a speed–time graph, away from the axis, means it is moving steadily.

Speed from a distance–time graph

The gradient of a straight section of a distance–time graph is the speed during that section. Pick two points on the line, far apart, and work out the rise divided by the run:

v=change in distancechange in timev = \frac{\text{change in distance}}{\text{change in time}}

A steeper line means a greater speed. If a straight section runs from 100 m at 10 s to 400 m at 30 s, the speed is (400−100)÷(30−10)=300÷20=15(400 - 100) \div (30 - 10) = 300 \div 20 = 15 m/s.

Distance from a speed–time graph

The area under a speed–time graph equals the distance travelled. For constant speed the area is a rectangle, so distance = speed × time. For speeding up steadily from rest, the area is a triangle, so distance = ½ × base × height. Longer journeys can be split into rectangles and triangles, then added.

Worked example: a city bus

A bus in Delhi pulls away from a stop. It speeds up steadily from rest to 12 m/s in 8.0 s, travels at 12 m/s for 20 s, then slows steadily to rest in 6.0 s. Use the speed–time graph to find the total distance.

Given: the graph has three parts, a triangle, a rectangle and a second triangle.

Method: distance = area under the speed–time graph.

first triangle=12×8.0×12=48 m\text{first triangle} = \tfrac{1}{2} \times 8.0 \times 12 = 48\ \text{m} rectangle=20×12=240 m\text{rectangle} = 20 \times 12 = 240\ \text{m} second triangle=12×6.0×12=36 m\text{second triangle} = \tfrac{1}{2} \times 6.0 \times 12 = 36\ \text{m}

Answer: total distance = 48 + 240 + 36 = 324 m.

You can go one step further and find the average speed for the trip: 324÷34=9.5324 \div 34 = 9.5 m/s, since the whole journey lasts 8.0 + 20 + 6.0 = 34 s.

See the graphs build in the simulation

In the simulation above, run the Journey motion and watch both graphs grow while the car moves. The simulation calls its second graph velocity–time. The car only ever moves forwards, so that graph is exactly the speed–time graph your syllabus describes.

The shading under that graph (Area under v–t graph) is already switched on when the simulation opens, so leave it on. As the car moves, the shaded area keeps pace with the distance travelled readout, which shows the area rule working live. Then compare the three stages of the journey on the distance–time graph: a curve bending upwards, a straight line, and a curve that levels off when the car stops.

Equations

Common mistakes

  • Reading a flat line on a speed–time graph as 'stopped'. It means constant speed unless the line lies on the time axis.
  • Finding the area under a distance–time graph. Area only gives distance on a speed–time graph.
  • Using a single point to find a gradient (for example 400 ÷ 30) instead of the change in distance divided by the change in time.
  • Forgetting the ½ when working out the area of a triangle under a speed–time graph.
  • Plotting with a scale that uses only a small corner of the grid, or leaving units off the axis labels.
  • Describing a curve on a distance–time graph as constant speed. A curve means the speed is changing.

Exam-style questions

Original questions written in the style of Cambridge IGCSE. Try each one before you reveal the answer.

  1. 1.A cyclist's journey is shown on a distance–time graph. From 0 to 40 s the line is straight and rises from 0 m to 200 m. From 40 s to 70 s the line is horizontal. From 70 s to 100 s the line is straight and rises from 200 m to 380 m.

    1. (a)Describe the motion of the cyclist between 40 s and 70 s.

      1 mark
      Show the answer

      Answer: The cyclist is at rest (stationary).

      Marking points

      • at rest / stationary / not moving
    2. (b)Calculate the speed of the cyclist between 0 and 40 s.

      2 marks
      Show the answer

      Answer: gradient = 200 ÷ 40 = 5.0 m/s

      Marking points

      • speed = gradient or 200 ÷ 40
      • 5.0 m/s
    3. (c)State, with a reason, whether the cyclist moves faster in the first section or in the last section.

      2 marks
      Show the answer

      Answer: The last section: its line is steeper, giving 180 ÷ 30 = 6.0 m/s compared with 5.0 m/s.

      Marking points

      • last section (70 s to 100 s)
      • steeper gradient / 6.0 m/s is greater than 5.0 m/s
    4. (d)Calculate the average speed of the cyclist for the whole 100 s.

      2 marks
      Show the answer

      Answer: 380 m ÷ 100 s = 3.8 m/s

      Marking points

      • total distance ÷ total time or 380 ÷ 100
      • 3.8 m/s
  2. 2.A lift in a tall building starts from rest. It speeds up steadily to 4.0 m/s in 5.0 s, travels at 4.0 m/s for 15 s, then slows steadily to rest in 4.0 s.

    1. (a)Sketch the speed–time graph for the motion of the lift. Label the axes.

      3 marks
      Show the answer

      Answer: Axes labelled speed in m/s and time in s. A straight line from the origin up to 4.0 m/s at 5.0 s, a horizontal line at 4.0 m/s until 20 s, then a straight line down to zero at 24 s.

      Marking points

      • both axes labelled with quantity and unit
      • straight line rising from the origin to 4.0 m/s at 5.0 s, then horizontal until 20 s
      • straight line falling to zero speed at 24 s
    2. (b)Calculate the total distance travelled by the lift.

      3 marks
      Show the answer

      Answer: Area = (½ × 5.0 × 4.0) + (15 × 4.0) + (½ × 4.0 × 4.0) = 10 + 60 + 8 = 78 m

      Marking points

      • distance = area under the speed–time graph
      • correct areas: 10 m, 60 m and 8 m
      • 78 m
    3. (c)(Supplement) Calculate the acceleration of the lift during the first 5.0 s.

      2 marks
      Show the answer

      Answer: a = Δv ÷ Δt = 4.0 ÷ 5.0 = 0.80 m/s²

      Marking points

      • gradient or 4.0 ÷ 5.0
      • 0.80 m/s²
  3. 3.A student looks at two lines on a speed–time graph. Line P is straight and slopes upwards. Line Q curves upwards but becomes less steep as time goes on.

    1. (a)(Supplement) Compare the accelerations shown by line P and line Q.

      2 marks
      Show the answer

      Answer: Line P shows a constant acceleration because its gradient does not change. Line Q shows an acceleration that is decreasing because its gradient gets smaller.

      Marking points

      • P: constant acceleration (constant gradient)
      • Q: acceleration decreasing / changing (gradient falling)
    2. (b)Explain why a horizontal line on a distance–time graph and a horizontal line on a speed–time graph show different motions.

      2 marks
      Show the answer

      Answer: On the distance–time graph the distance is not changing, so the object is at rest. On the speed–time graph the speed is not changing, so the object is moving at a constant speed.

      Marking points

      • distance–time: distance unchanged so at rest
      • speed–time: speed unchanged so constant speed (moving)
  4. 4.A student records the distance travelled by a toy car each second. Time / s: 0, 1, 2, 3, 4. Distance / m: 0, 0.5, 2.0, 4.5, 8.0.

    1. (a)State how a distance–time graph of these results would show that the car is accelerating.

      1 mark
      Show the answer

      Answer: The line would curve upwards, getting steeper.

      Marking points

      • curve whose gradient increases / gets steeper
    2. (b)Explain, using the data, how you can tell the car is speeding up.

      2 marks
      Show the answer

      Answer: The distance covered in each second increases: 0.5 m, then 1.5 m, then 2.5 m, then 3.5 m. Covering more distance in each equal time means the speed is increasing.

      Marking points

      • distance per second increases (0.5, 1.5, 2.5, 3.5 m)
      • so speed is increasing

Quick check

6 questions

  1. 1.On a distance–time graph, what does a straight line sloping upwards show?
  2. 2.What does the area under a speed–time graph represent?
  3. 3.A car moves at a constant 15 m/s for 8.0 s. What distance does the area under its speed–time graph give?
  4. 4.On a speed–time graph, a straight line slopes down to the time axis. What is the object doing?
  5. 5.A distance–time graph is a straight line from 0 m at 0 s to 100 m at 25 s. What is the speed?
  6. 6.(Supplement) A speed–time graph is a curve that becomes steeper as time goes on. What does this show?