Skip to content

Cambridge International · Cambridge IGCSE

Cambridge IGCSE Physics June 2024 Paper 1 Core (0625/11)

Set by Cambridge International for Cambridge IGCSE Physics, June 2024: 45 minutes and 40 marks, on Motion, Forces, Energy, work and power, Thermal physics, Transfer of thermal energy, Waves and sound, Light and the electromagnetic spectrum, Electrical quantities, Electric circuits and electrical safety, Magnetism and electromagnetic effects, Nuclear physics, Space physics. The paper itself is on Cambridge International’s website; this page adds what it covers, how to use it and original practice questions on the same topics.

Paper facts

Series
June 2024
Paper
Paper 1 Core
Code
0625/11
Tier
Core
Time
45 minutes
Marks
40
Calculator
Allowed
Syllabus
0625 (2023–2025 syllabus)
Links checked
17 November 2026

Official files

These files belong to Cambridge International. Labverse links to them and never hosts or copies them. Labverse is not affiliated with Cambridge International.

What this paper covers

12 topic groups from our map of Cambridge IGCSE Physics (0625). Revise each one with its topic pages and simulations before you sit the paper.

How to use this paper

  1. 1. Time it. Set 45 minutes for 40 marks: about 68 seconds a mark. At 23 minutes you should be roughly halfway through the marks; if you’re well behind, speed up on the short questions.
  2. 2. Sit it in one go. Open the question paper on Cambridge International’s website (the link above) and work on paper, with no notes.
  3. 3. Mark it with the official scheme. Give a mark only when your answer matches a marking point. Be strict with yourself: it’s the gaps you find that improve your grade.
  4. 4. Read the examiner report. It says which questions students found hardest and what the best answers did, so compare it with your own script.
  5. 5. Log mistakes by topic. Keep one line per topic group (Motion, Forces, Energy, work and power, Thermal physics, Transfer of thermal energy, Waves and sound, Light and the electromagnetic spectrum, Electrical quantities, Electric circuits and electrical safety, Magnetism and electromagnetic effects, Nuclear physics, Space physics) and add a tally each time a mark goes there.
  6. 6. Revisit, then redo. Work through the weakest group’s topic pages and simulations, try the questions below, and come back to the paper in a week.

Practise the same topics

6 original exam-style questions on this paper’s topics, written in the style of Cambridge IGCSE (not taken from the paper). Try each one before you reveal the answer.

  1. 1.A tower crane raises a steel beam of mass 850 kg at a steady speed from the ground to the top of a building 24 m high. Take g as 9.8 N/kg.

    From the topic: Work done

    1. (a)Calculate the force that the crane's cable exerts on the beam.

      2 marks
      Show the answer

      Answer: At a steady speed the cable force equals the weight: 850 × 9.8 = 8330 N

      Marking points

      • 850 × 9.8 seen
      • 8330 N
    2. (b)Calculate the work done by the cable on the beam.

      2 marks
      Show the answer

      Answer: W = Fd = 8330 × 24 = 199 920 J ≈ 2.0 × 10⁵ J (200 kJ)

      Marking points

      • 8330 × 24 seen
      • 199 920 J / 2.0 × 10⁵ J / 200 kJ
  2. 2.A student traps a fixed mass of air in a sealed metal container whose volume does not change. They measure its pressure at several temperatures and plot a graph of pressure against temperature in °C. The points lie on a straight line. When the line is extended to colder temperatures, it reaches zero pressure at −273 °C.

    From the topic: Absolute zero and the kelvin scale

    1. (a)Describe how the pressure of the trapped air changes as the container is warmed.

      1 mark
      Show the answer

      Answer: It rises steadily.

      Marking points

      • it increases (rises)
    2. (b)Explain, in terms of particles, why cooling the air makes its pressure fall.

      3 marks
      Show the answer

      Answer: As the air cools, its particles lose kinetic energy and slow down. They strike the walls less often, and each impact is gentler, so the pressure falls.

      Marking points

      • particles slow down / have less kinetic energy
      • fewer collisions with the walls each second
      • each collision is less forceful (smaller force)
    3. (c)State the name given to the temperature at which the extended line reaches zero pressure.

      1 mark
      Show the answer

      Answer: Absolute zero

      Marking points

      • absolute zero
    4. (d)Suggest why, even with much better cooling equipment, the pressure of the trapped air could not be measured all the way down to −273 °C.

      1 mark
      Show the answer

      Answer: The air would turn into a liquid long before it reached −273 °C (and absolute zero cannot actually be reached).

      Marking points

      • air would become a liquid (or solid) first / absolute zero cannot be reached
    5. (e)Convert 27 °C and 327 °C to kelvin.

      2 marks
      Show the answer

      Answer: 27 + 273 = 300 K and 327 + 273 = 600 K

      Marking points

      • 300 K
      • 600 K
  3. 3.Straight water waves cross a harbour in Valletta towards a sea wall. A visitor on the wall counts 18 waves passing a buoy in 60 s. Seen from above, the wavefronts are 12 m apart.

    From the topic: General properties of waves

    1. (a)Describe what is meant by a wavefront.

      1 mark
      Show the answer

      Answer: A line joining points on the wave that are at the same stage of their vibration, for example a line along one crest.

      Marking points

      • line joining points vibrating in step (at the same stage), e.g. along a crest
    2. (b)State the wavelength of the waves.

      1 mark
      Show the answer

      Answer: 12 m (the distance between neighbouring wavefronts)

      Marking points

      • 12 m
    3. (c)Calculate the frequency of the waves.

      2 marks
      Show the answer

      Answer: f = 18 ÷ 60 = 0.30 Hz

      Marking points

      • 18 ÷ 60 seen
      • 0.30 Hz
    4. (d)Calculate the speed of the waves.

      2 marks
      Show the answer

      Answer: v = fλ = 0.30 × 12 = 3.6 m/s

      Marking points

      • 0.30 × 12 seen (allow their f × 12)
      • 3.6 m/s
    5. (e)The buoy rises and falls as the waves pass, but it does not move towards the wall. Explain what this shows about waves.

      2 marks
      Show the answer

      Answer: The waves transfer energy, which makes the buoy move up and down, but they do not transfer matter: the water is not carried towards the wall.

      Marking points

      • energy is transferred (to the buoy / towards the wall)
      • matter (the water) is not transferred; it only vibrates about a fixed position
  4. 4.A torch contains a battery and a lamp. When the torch is on, the current in the lamp is 0.30 A and the potential difference across the lamp is 4.5 V.

    From the topic: Electrical energy and power

    1. (a)Describe the energy transfers from the battery to the surroundings while the torch is on.

      3 marks
      Show the answer

      Answer: Energy in the chemical store of the battery is transferred by the current (electrical work) to the lamp. The lamp gives out light and heats its surroundings, so the energy ends up as internal (thermal) energy of the surroundings.

      Marking points

      • energy starts in the chemical store of the battery
      • transferred by the current / electrical work to the lamp
      • lamp transfers it as light and by heating, ending as internal energy of the surroundings
    2. (b)Calculate the power of the lamp.

      2 marks
      Show the answer

      Answer: P = IV = 0.30 × 4.5 = 1.35 W

      Marking points

      • P = IV or 0.30 × 4.5
      • 1.35 W (accept 1.4 W)
    3. (c)The battery can supply 9720 J of energy before it runs out. Calculate how long the torch can stay on. Give your answer in hours.

      3 marks
      Show the answer

      Answer: t = E ÷ (IV) = 9720 ÷ 1.35 = 7200 s = 2.0 h

      Marking points

      • t = E ÷ (IV) or 9720 ÷ 1.35
      • 7200 s (allow about 6900 s if the power was rounded to 1.4 W)
      • 2.0 h (allow 1.9 h from a rounded power of 1.4 W)
  5. 5.A solenoid is connected to a d.c. supply. Looking at end X from outside the coil, the current flows clockwise around the turns. Y is the other end of the solenoid.

    From the topic: Magnetic effect of a current

    1. (a)State which end of the solenoid behaves as a north pole.

      1 mark
      Show the answer

      Answer: Y.

      Marking points

      • Y
    2. (b)Describe the pattern of the magnetic field inside and outside the solenoid, including its direction.

      3 marks
      Show the answer

      Answer: Inside, the lines are straight and parallel. Outside, it looks like the field round a bar magnet. The lines leave end Y and curve round outside the coil to end X, then run back through the inside from X to Y.

      Marking points

      • inside: straight, parallel (evenly spaced) lines
      • outside: the shape of a bar magnet's field
      • direction: out of Y and into X outside the coil (X to Y inside)
  6. 6.Astronomers give the distances to stars in light-years.

    From the topic: The Sun, stars and their life cycle

    1. (a)State what is meant by a light-year.

      1 mark
      Show the answer

      Answer: The distance that light travels through space (a vacuum) in one year.

      Marking points

      • the distance light travels (through space / a vacuum) in one year