What this topic covers
A herder on the Mongolian steppe phones home by satellite, while a flat in Manchester gets broadband through a strand of glass. Each link rides on an electromagnetic wave chosen for the job (syllabus 3.3).
Links to satellites (Core)
- Low-orbit satellites circle close to the Earth. Each crosses the sky within minutes, so a phone network needs many of them. Some satellite phones use them.
- Geostationary satellites circle above the equator, turning the same way as the Earth. Each stays above one spot, so a rooftop dish never needs to move. Satellite TV and some satellite phones use them.
Beyond the syllabus: microwaves cross the atmosphere easily, and a dish aims them in a narrow beam. A low orbit lies a few hundred to about two thousand kilometres up, and one lap takes roughly 90 to 130 minutes. A geostationary orbit lies about 36 000 km up, and one lap takes a day.
Phones, Wi-Fi and Bluetooth (Supplement)
Mobile phones and Wi-Fi rely on microwaves for two reasons. Some walls let them through, so a phone keeps its signal indoors. Their short wavelengths, at most a few tens of centimetres, mean the aerial that sends and receives them can be small.
Bluetooth, linking earbuds to a phone, counts as radio waves in this syllabus. The signal reaches through a wall into the next room, but every wall leaves it weaker.
Worked example: Wi-Fi and radio wavelengths (Supplement)
A router sends Wi-Fi at Hz, and a car radio picks up a station at Hz. Using m/s, find each wavelength.
Answer: 6.0 cm and 3.0 m.
Beyond the syllabus: a simple aerial is often a quarter of a wavelength long. That makes m for the Wi-Fi, small enough to fit inside a router or phone, while the car needs a rod of m.
Light and infrared in glass (Supplement)
Cable TV and fast broadband reach homes along optical fibres as flashes of visible light, or of infrared just beyond red. Glass lets these wavelengths through with very little loss, and they can carry data at a very high rate. Beyond the syllabus: their frequencies are so high that the flashes can be extremely short and close together.
Analogue and digital (Supplement)
| Analogue signal | Digital signal | |
|---|---|---|
| Values | any value in a range, changing smoothly | only a few fixed values, usually two: 0 and 1 |
| Shape | a continuous wave | a train of on–off pulses |
Sound, either way. A microphone turns sound into a voltage that rises and falls with the air pressure: an analogue signal. It can be sent like that, or measured thousands of times a second and each value sent as a binary number: a digital signal.
Why digital is better.
- More data: digital systems can send data at a higher rate.
- Longer range: any signal weakens over distance and picks up random noise. A regenerator only has to decide whether each pulse is a 0 or a 1, so it can rebuild a digital signal exactly as sent. Amplifying an analogue signal amplifies its noise too, so noise builds up.
Communication links in the simulation
In the simulation above, which opens on Orange light (600 nm), analogue and digital signals do not appear.
- (Core) Press the Infrared button under the stage, then Microwave. The marker moves to Microwave oven (12 cm), and a note under the dangers list says satellite links mainly use microwaves.
- (Supplement) Open the Supplement box below that note for why phones and wireless internet use microwaves.
- (Supplement) Press Radio to reach FM radio (3.0 m), whose Frequency card matches the car radio above. Its Supplement box covers Bluetooth.
- (Supplement) Choose TV remote control (940 nm) from Jump to an example and open the Supplement box on optical fibres.
- (Supplement) Move the Wavelength slider to 6.0 cm. The Frequency card shows 5.0 × 10⁹ Hz, the Wi-Fi value worked out above.