Cambridge International · Cambridge IGCSE
Cambridge IGCSE Physics June 2024 Paper 3 Core (0625/31)
Set by Cambridge International for Cambridge IGCSE Physics, June 2024: 1 hour 15 minutes and 80 marks, on Motion, Forces, Energy, work and power, Thermal physics, Transfer of thermal energy, Waves and sound, Light and the electromagnetic spectrum, Electrical quantities, Electric circuits and electrical safety, Magnetism and electromagnetic effects, Nuclear physics, Space physics. The paper itself is on Cambridge International’s website; this page adds what it covers, how to use it and original practice questions on the same topics.
Paper facts
- Series
- June 2024
- Paper
- Paper 3 Core
- Code
- 0625/31
- Tier
- Core
- Time
- 1 hour 15 minutes
- Marks
- 80
- Calculator
- Allowed
- Syllabus
- 0625 (2023–2025 syllabus)
- Links checked
- 17 November 2026
Official files
- Question paper(opens Cambridge International’s website)
- Mark scheme(opens Cambridge International’s website)
- Examiner report(opens Cambridge International’s website)
These files belong to Cambridge International. Labverse links to them and never hosts or copies them. Labverse is not affiliated with Cambridge International.
What this paper covers
12 topic groups from our map of Cambridge IGCSE Physics (0625). Revise each one with its topic pages and simulations before you sit the paper.
- Motion
Measurement techniques · Scalars and vectors · Speed and velocity · Distance–time and speed–time graphs · Acceleration · Free fall and terminal velocity · Mass and weight · Density
Adding and resolving vectorsMotion graphsFree fall and air resistanceWeight, mass and gravity
- Forces
Springs and load–extension graphs · Resultant force · Force, mass and acceleration · Friction and drag · Circular motion · Moments and equilibrium · Centre of gravity and stability · Momentum and impulse · Pressure
Hooke's law and springsFree-body diagrams and resultant forceCircular motionForce, mass and acceleration (F = ma)
- Energy, work and power
Energy stores and transfers · Kinetic and gravitational potential energy · Work done · Energy resources · Efficiency · Power
Energy stores and transfersEnergy skate trackWork doneEnergy resources
- Thermal physics
Kinetic particle model of matter · Brownian motion · Gas pressure and volume · Absolute zero and the kelvin scale · Thermal expansion · Specific heat capacity · Melting, boiling and evaporation
Particle model and states of matterGas laws and particlesSpecific heat capacityLatent heat and heating curves
- Transfer of thermal energy
Conduction · Convection · Thermal radiation · Consequences of thermal energy transfer
Conduction, convection and radiationThermal insulation and cooling curves
- Waves and sound
General properties of waves · Transverse and longitudinal waves · Reflection, refraction and diffraction · Sound waves · Speed of sound and echoes · Ultrasound
Transverse and longitudinal wavesRipple tankSound waves and the oscilloscopeSpeed of sound and echoes
- Light and the electromagnetic spectrum
Reflection of light · Refraction of light · Critical angle and total internal reflection · Thin lenses · Dispersion of light · Electromagnetic spectrum · Communication and digital signals
Reflection in a plane mirrorRefraction and Snell's lawLenses and ray diagramsElectromagnetic spectrum
- Electrical quantities
Electric charge · Electric fields · Electric current · E.m.f. and potential difference · Resistance · Current–voltage graphs · Electrical energy and power · Kilowatt-hours and electricity cost
Static electricity and electric fieldsCharge, current, energy and powerCircuit builderResistance of a wire
- Electric circuits and electrical safety
Circuit diagrams and components · Series and parallel circuits · Potential dividers · Electrical safety
Circuit builderSeries and parallel circuitsMains electricity and safety
- Magnetism and electromagnetic effects
Magnets and magnetic materials · Magnetic fields · Electromagnetic induction · The a.c. generator · Magnetic effect of a current · Force on a current-carrying conductor · The d.c. motor · Transformers
Magnetic field of a bar magnetElectromagnetic inductionMagnetic field around a wire and solenoidThe motor effect
- Nuclear physics
The nuclear atom · Alpha particle scattering · The nucleus and isotopes · Nuclear fission and fusion · Detecting radiation and background radiation · Alpha, beta and gamma emissions · Radioactive decay and decay equations · Half-life · Radiation safety precautions
Isotopes and atom builderAtomic models and Rutherford scatteringAlpha, beta and gamma radiationNuclear equations
- Space physics
The Earth, Sun and Moon · Orbital speed · The Solar System · The Sun, stars and their life cycle · Redshift and the Big Bang · Hubble constant and age of the Universe
Orbits and gravityLife cycle of starsRed-shift and the expanding universe
How to use this paper
- 1. Time it. Set 1 hour 15 minutes for 80 marks: about 56 seconds a mark. At 38 minutes you should be roughly halfway through the marks; if you’re well behind, speed up on the short questions.
- 2. Sit it in one go. Open the question paper on Cambridge International’s website (the link above) and work on paper, with no notes.
- 3. Mark it with the official scheme. Give a mark only when your answer matches a marking point. Be strict with yourself: it’s the gaps you find that improve your grade.
- 4. Read the examiner report. It says which questions students found hardest and what the best answers did, so compare it with your own script.
- 5. Log mistakes by topic. Keep one line per topic group (Motion, Forces, Energy, work and power, Thermal physics, Transfer of thermal energy, Waves and sound, Light and the electromagnetic spectrum, Electrical quantities, Electric circuits and electrical safety, Magnetism and electromagnetic effects, Nuclear physics, Space physics) and add a tally each time a mark goes there.
- 6. Revisit, then redo. Work through the weakest group’s topic pages and simulations, try the questions below, and come back to the paper in a week.
Practise the same topics
7 original exam-style questions on this paper’s topics, written in the style of Cambridge IGCSE (not taken from the paper). Try each one before you reveal the answer.
1.A student runs one 400 m lap of a school track in 80 s, then walks home.
From the topic: Speed and velocity
(a)Calculate the average speed of the student during the lap.
2 marksShow the answerHide the answer
Answer: v = s ÷ t = 400 ÷ 80 = 5.0 m/s
Marking points
- v = s/t or 400 ÷ 80
- 5.0 m/s
(b)The student walks 1.2 km home at an average speed of 1.5 m/s. Calculate the time taken in minutes.
3 marksShow the answerHide the answer
Answer: t = s ÷ v = 1200 ÷ 1.5 = 800 s = 13 minutes
Marking points
- t = s/v with s in metres (1200 m)
- 800 s
- 13 minutes (13.3)
2.A copper rod is taken out of a freezer at −18 °C and left in a warm room at 30 °C.
From the topic: Kinetic particle model of matter
(a)Describe how the motion of the copper particles changes as the rod warms up.
2 marksShow the answerHide the answer
Answer: The particles stay in fixed positions and vibrate, but they vibrate faster (more vigorously) as the temperature rises.
Marking points
- particles vibrate about fixed positions
- they vibrate faster / more vigorously as the rod warms
(b)The rod could, in principle, be cooled to a lowest possible temperature. State the name of this temperature and its value in °C.
2 marksShow the answerHide the answer
Answer: It is called absolute zero, and its value is −273 °C.
Marking points
- name: absolute zero
- value: −273 °C
(c)Compare the kinetic energy of the copper particles at that lowest temperature with their kinetic energy at any higher temperature.
1 markShow the answerHide the answer
Answer: It is lower: at absolute zero the kinetic energy of the particles is at its minimum.
Marking points
- least (minimum) kinetic energy at absolute zero
3.A glass plate laid on the bottom of a ripple tank creates a shallower region. Plane waves of frequency 6.0 Hz have a wavelength of 4.0 cm in the deep water. Over the plate, their speed is 0.15 m/s.
From the topic: Reflection, refraction and diffraction
(a)Calculate the speed of the waves in the deep water.
3 marksShow the answerHide the answer
Answer: λ = 4.0 cm = 0.040 m; v = fλ = 6.0 × 0.040 = 0.24 m/s
Marking points
- λ = 0.040 m
- v = fλ, or 6.0 × 0.040 seen
- 0.24 m/s
(b)State the frequency of the waves over the plate.
1 markShow the answerHide the answer
Answer: 6.0 Hz (unchanged)
Marking points
- 6.0 Hz
(c)Calculate the wavelength of the waves over the plate.
2 marksShow the answerHide the answer
Answer: λ = v ÷ f = 0.15 ÷ 6.0 = 0.025 m (2.5 cm)
Marking points
- 0.15 ÷ 6.0 seen
- 0.025 m or 2.5 cm
(d)The wavefronts reach the edge of the plate at an angle. Describe how their direction of travel changes as they cross onto the plate, and name this effect.
2 marksShow the answerHide the answer
Answer: The ripples’ direction of travel turns towards the normal. This is refraction.
Marking points
- turns towards the normal
- refraction
4.A geologist working in a remote part of the Andes carries a satellite phone. The camp has a television that receives its programmes from a satellite through a dish, and a radio that picks up a local station.
From the topic: Communication and digital signals
(a)State which region of the electromagnetic spectrum is mainly used to send signals to and from artificial satellites.
1 markShow the answerHide the answer
Answer: Microwaves.
Marking points
- microwaves
(b)Name the two types of artificial satellite used by satellite phones.
2 marksShow the answerHide the answer
Answer: Low-orbit satellites and geostationary satellites.
Marking points
- low-orbit (low Earth orbit) satellites
- geostationary satellites
(c)State which of these two types is used for direct broadcast satellite television.
1 markShow the answerHide the answer
Answer: Geostationary satellites.
Marking points
- geostationary
(d)The television is switched between channels with a remote control. Name the region of the electromagnetic spectrum that the remote control uses.
1 markShow the answerHide the answer
Answer: Infrared.
Marking points
- infrared
(e)Name the region of the electromagnetic spectrum that carries the local radio station's broadcasts.
1 markShow the answerHide the answer
Answer: Radio waves.
Marking points
- radio waves
5.A student draws a circuit diagram for a torch. It has two cells, a switch and a lamp, all in series.
From the topic: Circuit diagrams and components
(a)Describe the circuit symbol for a cell and state which side is the positive terminal.
2 marksShow the answerHide the answer
Answer: A long line next to a shorter line, parallel to each other. The long line is the positive terminal.
Marking points
- long line and short line (parallel to each other)
- long line is positive
(b)The student adds an ammeter to measure the current in the lamp and a voltmeter to measure the p.d. across it. State how each meter is connected.
2 marksShow the answerHide the answer
Answer: Ammeter: in series with the lamp. Voltmeter: in parallel, across the lamp.
Marking points
- ammeter in series
- voltmeter in parallel (across the lamp)
6.A student draws the magnetic field around a single bar magnet. The drawing has these faults: the arrows point from the S pole to the N pole, two lines cross near the S pole, and the lines are spaced evenly all round the magnet.
From the topic: Magnetic fields
(a)State the correct direction of the arrows on the lines outside the magnet.
1 markShow the answerHide the answer
Answer: Pointing from N towards S: each line leaves the N pole and ends at the S pole.
Marking points
- from N (north pole) to S (south pole)
(b)Explain why two field lines must not cross.
2 marksShow the answerHide the answer
Answer: A field can point only one way at each place. Where two lines crossed, there would be two directions at one spot, which cannot happen.
Marking points
- a field has just one direction at each place (the force on an N pole acts one way)
- crossing lines would give two directions at one point / a compass cannot point two ways
7.A school keeps a small sealed beta source for class experiments.
From the topic: Radiation safety precautions
(a)Describe how the source should be stored when it is not in use.
2 marksShow the answerHide the answer
Answer: In a lead-lined box, kept in a locked cupboard that carries the radiation warning sign.
Marking points
- in a lead-lined box (container)
- in a locked cupboard / labelled with a warning sign
(b)Describe two precautions the teacher takes while using the source.
2 marksShow the answerHide the answer
Answer: Any two of: lifts it with tongs, never the fingers; holds it at arm's length; points it away from people; uses it for as short a time as possible.
Marking points
- first precaution, e.g. handles it with tongs
- second precaution, e.g. holds it at arm's length / points it away from people / short time
(c)State one precaution taken when the source is carried from the store to the laboratory.
1 markShow the answerHide the answer
Answer: It stays inside its shielded (lead-lined) box while it is carried.
Marking points
- carried in its shielded (lead-lined) box