An original Labverse practice paper — not an official exam paper
Cambridge IGCSE Physics (0625)
Cambridge IGCSE Physics Paper 3 practice paper B
Written by Labverse from our own exam-style questions, to the same time and total marks as Cambridge International’s Paper 3 (0625/31, 0625/32, 0625/33), on the same topics. It is not set, checked or endorsed by Cambridge International.
- Time allowed
- 1 hour 15 minutes
- Total marks
- 80
- Questions
- 17
- Level
- Core
Instructions
- Answer every question. Work in one sitting and stop when the time is up.
- The marks for each part are shown beside it. Use them to judge how much to write.
- Show your working for calculations and give the unit with every answer.
To print the answers too, open the mark scheme at the end first.
Marks by topic
- Motion · 7 marks
- Forces · 9 marks
- Energy, work and power · 13 marks
- Thermal physics · 10 marks
- Waves and sound · 7 marks
- Light and the electromagnetic spectrum · 5 marks
- Electrical quantities · 4 marks
- Electric circuits and electrical safety · 7 marks
- Magnetism and electromagnetic effects · 11 marks
- Nuclear physics · 6 marks
- Space physics · 1 mark
Questions
- Question 1 (6 marks)Distance–time and speed–time graphs
A lift in a tall building starts from rest. It speeds up steadily to 4.0 m/s in 5.0 s, travels at 4.0 m/s for 15 s, then slows steadily to rest in 4.0 s.
(a)Sketch the speed–time graph for the motion of the lift. Label the axes.
[3](b)Calculate the total distance travelled by the lift.
[3]
- Question 2 (1 mark)Acceleration
A ball is dropped from a high window. Air resistance on the ball can be ignored.
(a)State the approximate value of the acceleration of free fall near the surface of the Earth.
[1]
- Question 3 (4 marks)Resultant force
A hot-air balloon is tied to the ground by a single vertical rope. The upward force on the balloon from the surrounding air is 5200 N. The weight of the balloon and its load is 4700 N. The balloon is not moving.
(a)Calculate the force that the rope exerts on the balloon and state its direction.
[2](b)The rope is untied. State the resultant force on the balloon at that moment, including its direction, and describe what the balloon starts to do.
[2]
- Question 4 (5 marks)Friction and drag
A warehouse worker pushes horizontally on a heavy crate that is resting on the floor. At first the crate does not move.
(a)The push is 150 N. State the size and the direction of the friction force on the crate.
[2](b)Explain how you decided on the size of the friction force.
[1](c)The worker pushes harder and the crate starts to slide. It then moves at a constant speed while the push is 210 N. State the friction force on the crate now.
[1](d)Suggest one way of making the crate easier to slide.
[1]
- Question 5 (7 marks)Work done
A student carries a bag of books of mass 6.0 kg along a level corridor 30 m long, holding the bag at a constant height. Take g as 9.8 N/kg.
(a)Calculate the weight of the bag.
[2](b)State the work done on the bag by the upward force from the student's hand as the student walks along the corridor. Explain your answer.
[2](c)The student then carries the bag up a staircase, raising it through a vertical height of 3.5 m at a steady speed. Calculate the work done on the bag by the upward force.
[2](d)Name the energy store of the bag that gains this energy.
[1]
- Question 6 (6 marks)Power
A goods lift raises a load of mass 480 kg through a vertical height of 35 m in 40 s, at a steady speed. Consider only the load. Take g as 9.8 N/kg.
(a)Calculate the load’s weight.
[2](b)Calculate the work done on the load.
[2](c)Calculate the useful power output of the lift motor.
[2]
- Question 7 (6 marks)Kinetic particle model of matter
A student draws particle diagrams for three samples, P, Q and R, of the same substance. In P the particles touch and sit in neat rows. In Q the particles are a long way apart. In R most of the particles touch, but they are jumbled.
(a)State which sample is a liquid.
[1](b)Describe how the particles in P move.
[1](c)Describe how the particles in Q are arranged and how they move.
[2](d)Sample R is cooled until it looks like sample P. Name this change of state.
[1](e)Sample R is heated until it looks like sample Q. Name this change of state.
[1]
- Question 8 (4 marks)Melting, boiling and evaporation
A student leaves a shallow dish of water on a laboratory bench. Two days later the dish is empty, although the water never came close to 100 °C.
(a)Name the process by which the water left the dish.
[1](b)Describe this process in terms of particles.
[2](c)State the effect of evaporation on the temperature of the water that remains in the dish.
[1]
- Question 9 (1 mark)Transverse and longitudinal waves
The cone of a loudspeaker vibrates backwards and forwards 680 times each second, sending sound along a long tube of air. Sound travels through the air in the tube at 340 m/s.
(a)State the frequency of the sound.
[1]
- Question 10 (6 marks)Reflection, refraction and diffraction
A student uses a ripple tank. A vibrating straight bar sends plane waves towards a straight metal barrier, which is placed at an angle to the wavefronts.
(a)State the name given to the construction line at 90° to the barrier where a wave meets it.
[1](b)The waves arrive with an angle of incidence of 35°. State the angle of reflection.
[1](c)State how the speed and the wavelength of the reflected waves compare with those of the incident waves.
[2](d)The sides of the tank slope and are lined with foam. Suggest why.
[2]
- Question 11 (5 marks)Thin lenses
A beam of light, with every ray parallel to the principal axis, is directed at a thin converging lens.
(a)State what is meant by the principal focus of the lens.
[2](b)State what is meant by the focal length of the lens.
[1](c)The converging lens is replaced by a thin diverging lens. Describe what happens to the beam.
[2]
- Question 12 (4 marks)E.m.f. and potential difference
A student uses a voltmeter to measure the potential difference across a lamp.
(a)State how the voltmeter is connected.
[1](b)Define potential difference.
[2](c)The voltmeter has two ranges, 0–3 V and 0–15 V. The p.d. is expected to be about 2 V. State which range gives the more precise reading.
[1]
- Question 13 (7 marks)Electrical safety
A metal kettle has a power of 2.4 kW. It is used on a 230 V supply.
(a)Calculate the current in the kettle in normal use.
[2](b)Fuses rated 3 A, 5 A, 10 A and 13 A are available. State which fuse should be fitted and explain your choice.
[2](c)The live wire comes loose inside the kettle and touches the metal casing. Explain how the earth wire and the fuse together protect the user.
[3]
- Question 14 (5 marks)Magnetic fields
A teacher in Jakarta shows the field of a bar magnet using iron filings.
(a)Describe how the teacher uses the filings to show the field pattern.
[2](b)Explain why the filings line up along the field lines.
[2](c)State one piece of information that a plotting compass gives but the filings do not.
[1]
- Question 15 (6 marks)Electromagnetic induction
A teacher in Hanoi connects a long copper wire to a sensitive meter. A straight part of the wire passes horizontally through the gap of a horseshoe magnet. In the gap, the field lines run horizontally from one pole to the other, crossing the wire at 90°.
(a)Describe how the wire and meter can be used to demonstrate an induced e.m.f. Include what the class sees.
[3](b)The teacher now moves the wire horizontally, along the field lines. State and explain what the meter shows.
[2](c)Suggest why a sensitive meter is needed for this experiment.
[1]
- Question 16 (6 marks)The nuclear atom
A neutral atom of lithium consists of a nucleus and three electrons.
(a)State the sign of the charge on the nucleus.
[1](b)Describe where the electrons are found in the atom.
[1](c)Explain why the atom has no overall charge.
[2](d)The atom loses one electron. State the name of the particle that forms and the sign of its charge.
[2]
- Question 17 (1 mark)The Sun, stars and their life cycle
Astronomers give the distances to stars in light-years.
(a)State what is meant by a light-year.
[1]
End of practice paper · 80 marks in total
Mark schemeOpen it only after you have finished the paper.ShowHide
Question 1 (6 marks)
(a)Axes labelled speed in m/s and time in s. A straight line from the origin up to 4.0 m/s at 5.0 s, a horizontal line at 4.0 m/s until 20 s, then a straight line down to zero at 24 s. [3]
- both axes labelled with quantity and unit
- straight line rising from the origin to 4.0 m/s at 5.0 s, then horizontal until 20 s
- straight line falling to zero speed at 24 s
(b)Area = (½ × 5.0 × 4.0) + (15 × 4.0) + (½ × 4.0 × 4.0) = 10 + 60 + 8 = 78 m [3]
- distance = area under the speed–time graph
- correct areas: 10 m, 60 m and 8 m
- 78 m
Revise: Distance–time and speed–time graphs · Motion graphs simulation
Question 2 (1 mark)
(a)9.8 m/s² [1]
- 9.8 m/s² (allow 9.81 m/s²)
Revise: Acceleration · Motion graphs simulation
Question 3 (4 marks)
(a)The forces balance, so the rope pulls with 5200 − 4700 = 500 N, downwards. [2]
- 500 N
- downwards
(b)500 N upwards, so the balloon starts to rise, speeding up. [2]
- 500 N upwards
- balloon moves upwards / accelerates upwards
Revise: Resultant force · Free-body diagrams and resultant force simulation
Question 4 (5 marks)
(a)150 N, in the opposite direction to the push. [2]
- 150 N
- opposite to the push
(b)The crate stays at rest, so no resultant force acts and friction must balance the push. [1]
- crate at rest so resultant force is zero / forces are balanced
(c)210 N (constant speed means the resultant force is zero). [1]
- 210 N
(d)Any sensible way, such as putting it on rollers or a trolley, oiling or smoothing the floor, or taking some of the contents out. [1]
- any one valid method, e.g. rollers / wheels, lubricating the floor, making the crate lighter
Revise: Friction and drag · Static and kinetic friction simulation
Question 5 (7 marks)
(a)weight = mg = 6.0 × 9.8 = 58.8 N [2]
- 6.0 × 9.8 seen
- 58.8 N
(b)0 J. The bag moves horizontally, at right angles to the upward force, so it moves no distance in the direction of that force. [2]
- zero / 0 J
- no distance moved in the direction of the (upward) force / motion at right angles to the force / height does not change
(c)W = Fd = 58.8 × 3.5 = 205.8 J ≈ 206 J [2]
- 58.8 × 3.5 seen
- 206 J (205.8 J)
(d)Its gravitational potential store. [1]
- gravitational potential (store)
Revise: Work done · Work done simulation
Question 6 (6 marks)
(a)weight = mg = 480 × 9.8 = 4704 N [2]
- 480 × 9.8 seen
- 4704 N
(b)W = Fd = 4704 × 35 = 164 640 J (≈ 165 kJ) [2]
- 4704 × 35 seen
- 164 640 J (165 kJ)
(c)P = W ÷ t = 164 640 ÷ 40 = 4116 W ≈ 4.12 kW [2]
- 164 640 ÷ 40 seen
- 4116 W (4.12 kW)
Revise: Power · Power and efficiency simulation
Question 7 (6 marks)
(a)R [1]
- R
(b)Each particle vibrates about a fixed position. [1]
- vibrating about fixed positions (vibrating in place)
(c)The particles are far apart in a random arrangement, and they move quickly in random directions. [2]
- far apart / random (irregular) arrangement
- move quickly (freely) in random directions
(d)Freezing (solidification) [1]
- freezing / solidification
(e)Boiling (or evaporation) [1]
- boiling / evaporation
Revise: Kinetic particle model of matter · Particle model and states of matter simulation
Question 8 (4 marks)
(a)Evaporation [1]
- evaporation
(b)The more energetic water particles near the surface have enough energy to overcome the attraction of the other particles, and they escape from the surface into the air. [2]
- the more energetic / fastest particles
- escape from the surface (of the liquid) into the air
(c)It lowers the temperature: the remaining water cools. [1]
- temperature decreases / the water cools
Revise: Melting, boiling and evaporation · Latent heat and heating curves simulation
Question 9 (1 mark)
(a)680 Hz [1]
- 680 Hz
Revise: Transverse and longitudinal waves · Transverse and longitudinal waves simulation
Question 10 (6 marks)
(a)The normal. [1]
- normal
(b)35° [1]
- 35°
(c)Both are the same as for the incident waves. [2]
- speed unchanged
- wavelength unchanged
(d)The foam absorbs waves reaching the sides, so they do not reflect back across the tank and confuse the pattern. [2]
- absorbs the waves at the sides
- so there are no reflections from the sides (which would spoil the pattern)
Revise: Reflection, refraction and diffraction · Ripple tank simulation
Question 11 (5 marks)
(a)The point on the principal axis where rays that were parallel to the axis meet after passing through the lens. [2]
- point on the principal axis
- where rays parallel to the axis meet / converge after passing through the lens
(b)How far the principal focus is from the optical centre (the centre) of the lens. [1]
- distance between the optical centre (centre of the lens) and the principal focus
(c)The rays spread out (diverge) after the lens. They appear to come from the principal focus on the side of the lens where the light enters. [2]
- rays spread out / diverge
- appear to come from the principal focus on the same side as the incoming light
Question 12 (4 marks)
(a)In parallel with the lamp (across its terminals). [1]
- in parallel / across the lamp
(b)The work done by unit charge (one coulomb) as it passes through a component. [2]
- work done (energy transferred) by unit charge
- passing through the component
(c)0–3 V [1]
- 0–3 V
Revise: E.m.f. and potential difference · Circuit builder simulation
Question 13 (7 marks)
(a)I = P ÷ V = 2400 ÷ 230 = 10.4 A [2]
- I = P ÷ V or 2400 ÷ 230
- 10.4 A (accept 10.43 A)
(b)13 A. It is the smallest rating above the normal current of 10.4 A; a 10 A fuse would melt every time the kettle was used. [2]
- 13 A
- smallest rating above 10.4 A / a 10 A fuse would melt in normal use
(c)The fault joins live to earth through the casing and the low-resistance earth wire, so a very large current flows. This current is much larger than the fuse rating, so the fuse melts. The kettle is then cut off from the live supply, so the casing is not live and cannot give a shock. [3]
- large current flows through the casing and the (low-resistance) earth wire to earth
- current is greater than the fuse rating, so the fuse melts
- the kettle is disconnected from the live supply, so the casing is not live / cannot give a shock
Revise: Electrical safety · Mains electricity and safety simulation
Question 14 (5 marks)
(a)Place a sheet of paper or card over the magnet and sprinkle iron filings thinly on it. Tap the card gently so that the filings line up in the pattern of the field. [2]
- paper (card) on top of the magnet with iron filings sprinkled on it
- tap the card gently (so the filings form the pattern)
(b)Each filing becomes magnetised by induction, so it acts as a tiny magnet and turns to line up with the field. [2]
- each filing is magnetised (has magnetism induced in it) / becomes a small magnet
- it turns to line up with the field (with the direction of the force)
(c)The direction of the field. [1]
- the direction of the field (which way the lines point)
Revise: Magnetic fields · Magnetic field of a bar magnet simulation
Question 15 (6 marks)
(a)Move the wire up (or down) through the gap. The meter needle moves while the wire is moving. When the wire stops the reading is zero, and moving it the other way makes the needle move the other way. [3]
- move the wire up or down through the gap (across the field)
- the meter deflects while the wire is moving
- no reading when the wire is still / opposite deflection when moved the opposite way
(b)Zero, because the wire is moving along the field lines and is not cutting across any of them. [2]
- zero / no deflection
- the wire is not cutting (crossing) the field lines
(c)The induced e.m.f. and current from a single wire are very small. [1]
- the induced e.m.f. / current is very small
Revise: Electromagnetic induction · Electromagnetic induction simulation
Question 16 (6 marks)
(a)Positive. [1]
- positive
(b)They move in orbits around the nucleus, outside it. [1]
- orbiting (moving around) the nucleus / outside the nucleus
(c)The positive charge on the nucleus is equal in size to the total negative charge of the three electrons, so the two charges cancel. [2]
- positive charge of nucleus equal in size to total negative charge of electrons
- so the charges cancel (balance)
(d)An ion, which is positively charged. [2]
- ion
- positive
Revise: The nuclear atom · Isotopes and atom builder simulation
Question 17 (1 mark)
(a)The distance that light travels through space (a vacuum) in one year. [1]
- the distance light travels (through space / a vacuum) in one year
Revise: The Sun, stars and their life cycle · Life cycle of stars simulation