Skip to content

An original Labverse practice paper — not an official exam paper

Cambridge IGCSE Physics (0625)

Cambridge IGCSE Physics Paper 3 practice paper A

Written by Labverse from our own exam-style questions, to the same time and total marks as Cambridge International’s Paper 3 (0625/31, 0625/32, 0625/33), on the same topics. It is not set, checked or endorsed by Cambridge International.

Time allowed
1 hour 15 minutes
Total marks
80
Questions
15
Level
Core

Instructions

  • Answer every question. Work in one sitting and stop when the time is up.
  • The marks for each part are shown beside it. Use them to judge how much to write.
  • Show your working for calculations and give the unit with every answer.

To print the answers too, open the mark scheme at the end first.

Marks by topic

  • Motion · 6 marks
  • Forces · 14 marks
  • Energy, work and power · 10 marks
  • Thermal physics · 1 mark
  • Transfer of thermal energy · 3 marks
  • Waves and sound · 8 marks
  • Light and the electromagnetic spectrum · 8 marks
  • Electrical quantities · 2 marks
  • Electric circuits and electrical safety · 6 marks
  • Magnetism and electromagnetic effects · 15 marks
  • Nuclear physics · 7 marks

Questions

  1. Question 1 (6 marks)Speed and velocity

    A bus in Lagos travels between two stops on a busy road.

    1. (a)Define speed.

      [1]
    2. (b)The bus covers 3.6 km in 6.0 minutes. Calculate its average speed in m/s.

      [3]
    3. (c)Suggest why the highest speed of the bus during this trip is greater than its average speed.

      [2]
  2. Question 2 (8 marks)Moments and equilibrium

    A uniform see-saw is pivoted at its centre. A child of weight 350 N sits 1.8 m to the left of the pivot. A second child, of weight 450 N, sits to the right of the pivot, and the see-saw balances horizontally.

    1. (a)Calculate the moment of the first child's weight about the pivot, and state whether it is clockwise or anticlockwise.

      [2]
    2. (b)Calculate how far the second child sits from the pivot.

      [2]
    3. (c)State the two conditions needed for the see-saw to be in equilibrium.

      [2]
    4. (d)The plank weighs 200 N. Calculate the upward force that the pivot exerts on the plank.

      [2]
  3. Question 3 (6 marks)Moments and equilibrium

    A uniform metre rule is supported by a knife-edge under its 50 cm mark. A 0.30 kg mass hangs from the 10 cm mark. The gravitational field strength g is 9.8 N/kg.

    1. (a)Work out the weight of the 0.30 kg mass.

      [1]
    2. (b)Calculate the moment of this weight about the knife-edge.

      [2]
    3. (c)A second mass is hung from the 80 cm mark and the rule balances. Calculate this mass.

      [3]
  4. Question 4 (5 marks)Energy stores and transfers

    A car is travelling along a level road. The driver brakes and the car comes to rest.

    1. (a)Name the energy store of the car that decreases.

      [1]
    2. (b)Friction between the brake pads and the discs makes them hot. State how energy is transferred to the pads and discs, and name the store that increases.

      [2]
    3. (c)The car's kinetic store decreases by 180 kJ, and the pads and discs gain 172 kJ. Calculate how much energy goes elsewhere, and suggest where it goes.

      [2]
  5. Question 5 (5 marks)Work done

    In a warehouse, a worker pushes a loaded trolley along a level floor with a constant horizontal force of 85 N. The trolley moves 18 m in the direction of the force at a steady speed.

    1. (a)State the equation that links work done, force and distance moved.

      [1]
    2. (b)Calculate the work that the worker does on the trolley.

      [2]
    3. (c)The trolley's speed does not change. State the energy store that gains this energy, and explain your answer.

      [2]
  6. Question 6 (1 mark)Specific heat capacity

    A pan of soup is heated on a stove. Its temperature rises from 20 °C to 70 °C.

    1. (a)State what happens to the internal energy of the soup.

      [1]
  7. Question 7 (3 marks)Convection

    In a hot-water storage tank in a flat in Seoul, the electric heater is near the bottom of the tank, and hot water is piped out from the top.

    1. (a)Explain why the heater is placed near the bottom of the tank.

      [2]
    2. (b)Suggest why the hot water is piped out from the top of the tank.

      [1]
  8. Question 8 (8 marks)Speed of sound and echoes

    Two microphones are placed 1.50 m apart in a straight line and connected to an electronic timer. The timer starts when a sound reaches the first microphone and stops when it reaches the second. A student makes a sharp sound in line with the microphones.

    1. (a)The timer reads 4.4 ms. Calculate the speed of sound in air.

      [3]
    2. (b)Explain why the distance is not doubled in this method.

      [1]
    3. (c)Suggest why this method can measure such a short time accurately, but a stopwatch cannot.

      [2]
    4. (d)Sound travels faster in warmer air. The experiment is repeated on a much warmer day. State and explain how the timer reading changes.

      [2]
  9. Question 9 (8 marks)Electromagnetic spectrum

    A radio station in Nairobi broadcasts at a frequency of 9.6 × 10⁷ Hz. Electromagnetic waves travel through air at 3.0 × 10⁸ m/s.

    1. (a)Calculate the wavelength used by this station.

      [3]
    2. (b)A microwave oven uses microwaves of wavelength 0.12 m. State whether their frequency is higher or lower than that of the radio waves. Explain your answer.

      [2]
    3. (c)State the harmful effect on people of too much exposure to microwaves.

      [1]
    4. (d)State two uses of microwaves other than cooking.

      [2]
  10. Question 10 (2 marks)E.m.f. and potential difference

    A small electric motor runs from a 9.0 V battery.

    1. (a)State what is meant by the e.m.f. of the battery.

      [2]
  11. Question 11 (6 marks)Electrical safety

    In a student flat, a heater, a kettle and a toaster are all plugged into one extension lead. The lead is plugged into a single wall socket.

    1. (a)Explain why this is a hazard.

      [2]
    2. (b)The heater's cable has cracked insulation. Explain why this is dangerous.

      [2]
    3. (c)State why it is dangerous to use a hairdryer with wet hands.

      [2]
  12. Question 12 (4 marks)Magnetic effect of a current

    A solenoid is connected to a d.c. supply. Looking at end X from outside the coil, the current flows clockwise around the turns. Y is the other end of the solenoid.

    1. (a)State which end of the solenoid behaves as a north pole.

      [1]
    2. (b)Describe the pattern of the magnetic field inside and outside the solenoid, including its direction.

      [3]
  13. Question 13 (4 marks)The d.c. motor

    A water pump on a farm in Kenya is driven by a d.c. motor that runs from a solar panel.

    1. (a)On a cloudy day the current from the panel falls. State how this changes the turning effect on the motor's coil.

      [1]
    2. (b)Suggest one change to the design of the motor that would give a larger turning effect with the same current.

      [1]
    3. (c)A technician connects the panel's two leads to the motor the other way round. State and explain the effect on the motor.

      [2]
  14. Question 14 (7 marks)Transformers

    A student in Nairobi builds a simple transformer from a soft-iron core and two coils of insulated wire. The primary coil has 400 turns and is connected to a 6.0 V a.c. supply. The secondary coil has 2000 turns.

    1. (a)State what is meant by the primary coil and by the secondary coil.

      [2]
    2. (b)Calculate the voltage across the secondary coil.

      [2]
    3. (c)State whether this transformer is step-up or step-down. Give a reason.

      [2]
    4. (d)Suggest why the core is made of soft iron.

      [1]
  15. Carbon-14 is a radioactive isotope of carbon. Each carbon-14 nucleus that decays emits a β-particle and becomes a nucleus of nitrogen-14.

    1. (a)State what is meant by radioactive decay.

      [2]
    2. (b)The decay of carbon-14 nuclei is random. State what random means here.

      [1]
    3. (c)A sample of carbon-14 is cooled to −20 °C. State the effect on its decay, and give a reason.

      [2]
    4. (d)Explain why the decay of carbon-14 produces a different element.

      [2]

End of practice paper · 80 marks in total

Mark schemeOpen it only after you have finished the paper.Show
  1. Question 1 (6 marks)

    1. (a)The distance moved in one unit of time (distance ÷ time). [1]

      • distance travelled per unit time / distance divided by time taken
    2. (b)3600 m ÷ 360 s = 10 m/s [3]

      • converts to 3600 m and 360 s
      • average speed = total distance ÷ total time, or 3600 ÷ 360
      • 10 m/s
    3. (c)The bus slows down or stops at junctions and stops, so at other times it must go faster than the average to cover the distance in the time. [2]

      • bus slows down or is stationary for part of the time
      • so it must move faster than 10 m/s at other times to cover the same distance

    Revise: Speed and velocity · Motion graphs simulation

  2. Question 2 (8 marks)

    1. (a)350 × 1.8 = 630 N m, anticlockwise. [2]

      • 630 N m
      • anticlockwise
    2. (b)Clockwise moment = anticlockwise moment, so 450 × d = 630 and d = 1.4 m. [2]

      • 450 × d = 630 (clockwise moment = anticlockwise moment)
      • 1.4 m
    3. (c)There is no resultant force on it, and there is no resultant moment on it. [2]

      • no resultant force
      • no resultant moment
    4. (d)Upward force = total downward force = 350 + 450 + 200 = 1000 N [2]

      • upward force = total weight / 350 + 450 + 200
      • 1000 N

    Revise: Moments and equilibrium · Principle of moments simulation

  3. Question 3 (6 marks)

    1. (a)W = mg = 0.30 × 9.8 = 2.94 N (2.9 N) [1]

      • 2.94 N or 2.9 N
    2. (b)Distance from the knife-edge: 50 cm − 10 cm, which is 0.40 m. Moment = 2.94 × 0.40 = 1.18 N m (1.2 N m). [2]

      • distance from the knife-edge = 0.40 m (40 cm)
      • 1.18 N m or 1.2 N m
    3. (c)Its weight × 0.30 = 1.176, so its weight = 3.92 N and its mass = 3.92 ÷ 9.8 = 0.40 kg. (Or 0.30 × 40 = m × 30, giving m = 0.40 kg.) [3]

      • weight × 0.30 = 1.18 (clockwise moment = anticlockwise moment)
      • weight = 3.92 N (3.9 N)
      • mass = 0.40 kg

    Revise: Moments and equilibrium · Principle of moments simulation

  4. Question 4 (5 marks)

    1. (a)The kinetic store. [1]

      • kinetic
    2. (b)By mechanical work done (by the friction forces). The internal (thermal) store of the pads and discs increases. [2]

      • mechanical work done (by friction)
      • internal (thermal) store of the pads / discs
    3. (c)180 − 172 = 8 kJ. It warms the tyres, the road and the air (and a little leaves as sound). [2]

      • 8 kJ
      • internal (thermal) store of tyres / road / air, or sound

    Revise: Energy stores and transfers · Energy stores and transfers simulation

  5. Question 5 (5 marks)

    1. (a)Work done = force × distance moved in the direction of the force (W = Fd). [1]

      • W = Fd / work done = force × distance (moved in the direction of the force)
    2. (b)W = 85 × 18 = 1530 J [2]

      • 85 × 18 seen
      • 1530 J
    3. (c)The internal (thermal) store of the wheels, floor and surroundings. The work is done against friction, and the kinetic store cannot gain energy because the speed stays the same. [2]

      • internal (thermal) store (of wheels / floor / surroundings)
      • work done against friction / speed constant so kinetic store unchanged

    Revise: Work done · Work done simulation

  6. Question 6 (1 mark)

    1. (a)It increases. [1]

      • increases

    Revise: Specific heat capacity · Specific heat capacity simulation

  7. Question 7 (3 marks)

    1. (a)Water warmed at the bottom becomes less dense and rises, while cooler water sinks down to the heater. This sets up convection currents, so all of the water in the tank is heated. [2]

      • warmed water becomes less dense and rises (cooler water sinks to the heater)
      • convection currents carry energy through all the water
    2. (b)The hottest water is the least dense, so it collects at the top. [1]

      • the hottest (least dense) water collects at the top

    Revise: Convection · Conduction, convection and radiation simulation

  8. Question 8 (8 marks)

    1. (a)t = 4.4 ms = 0.0044 s. v = s ÷ t = 1.50 ÷ 0.0044 = 341 m/s (about 340 m/s). [3]

      • 4.4 ms = 0.0044 s
      • v = 1.50 ÷ 0.0044
      • v = 341 m/s (accept 340 m/s)
    2. (b)Nothing is reflected: the sound passes each microphone once, so it covers the 1.50 m gap only once. [1]

      • no reflection, so the sound crosses the gap only once
    3. (c)The timer starts and stops automatically, so there is no human reaction time. A reaction time of about 0.2 s is far longer than the 4.4 ms being measured. [2]

      • the timer is triggered automatically: no reaction time
      • a reaction time (about 0.2 s) is much longer than the time measured
    4. (d)The reading is smaller: the sound crosses the same 1.50 m gap at a higher speed, so it takes less time (t = s ÷ v). [2]

      • smaller (a shorter time)
      • the same distance at a higher speed takes less time (t = s ÷ v)

    Revise: Speed of sound and echoes · Speed of sound and echoes simulation

  9. Question 9 (8 marks)

    1. (a)λ = v ÷ f = 3.0 × 10⁸ ÷ 9.6 × 10⁷ = 3.1 m [3]

      • λ = v ÷ f (or v = fλ) seen
      • 3.0 × 10⁸ ÷ 9.6 × 10⁷ seen
      • 3.1 m (accept 3.13 m)
    2. (b)Higher. Both waves travel at the same speed, and the microwaves have the shorter wavelength, so f = v ÷ λ is larger. [2]

      • higher
      • same speed but shorter wavelength (so f = v ÷ λ is larger)
    3. (c)Body cells are heated from the inside. [1]

      • cells heated inside the body
    4. (d)Satellite television and mobile phones. [2]

      • one from: satellite television (or other links with satellites); mobile (cell) phones; wireless internet (Wi-Fi)
      • a second, different use from that list

    Revise: Electromagnetic spectrum · Electromagnetic spectrum simulation

  10. Question 10 (2 marks)

    1. (a)The electrical work done by the battery in moving unit charge (one coulomb) around a complete circuit. [2]

      • (electrical) work done by the source/battery
      • in moving unit charge around a complete circuit

    Revise: E.m.f. and potential difference · Circuit builder simulation

  11. Question 11 (6 marks)

    1. (a)The appliances are in parallel, so their currents add. The total current in the lead, plug and socket is larger than they are designed for (overloading), so they overheat and could start a fire. [2]

      • the currents add up, so the total current is too large (overloading)
      • the lead / plug / socket overheats and could start a fire
    2. (b)A live conductor may be exposed, and touching it could give an electric shock. The live and neutral conductors could also touch, causing a short circuit: a large current that could overheat the cable and start a fire. [2]

      • an exposed live conductor could give an electric shock if touched
      • live and neutral could touch: a short circuit / large current / fire
    3. (c)Impure water conducts electricity, so a current can pass through the person to earth, giving an electric shock. [2]

      • (impure) water conducts electricity
      • a current can pass through the person to earth / electric shock

    Revise: Electrical safety · Mains electricity and safety simulation

  12. Question 12 (4 marks)

    1. (a)Y. [1]

      • Y
    2. (b)Inside, the lines are straight and parallel. Outside, it looks like the field round a bar magnet. The lines leave end Y and curve round outside the coil to end X, then run back through the inside from X to Y. [3]

      • inside: straight, parallel (evenly spaced) lines
      • outside: the shape of a bar magnet's field
      • direction: out of Y and into X outside the coil (X to Y inside)

    Revise: Magnetic effect of a current · Magnetic field around a wire and solenoid simulation

  13. Question 13 (4 marks)

    1. (a)The turning effect becomes smaller. [1]

      • smaller / decreases
    2. (b)Wind the coil with extra turns, or fit a stronger magnet. [1]

      • more turns on the coil / stronger magnet (field)
    3. (c)The motor turns the opposite way, because the current in the coil is reversed, so the forces on its sides reverse. [2]

      • turns in the opposite direction
      • current (in the coil) reversed, so the forces reverse

    Revise: The d.c. motor · The motor effect simulation

  14. Question 14 (7 marks)

    1. (a)The primary coil is the input coil, connected to the supply. The secondary coil is the output coil, connected to the load. [2]

      • primary: the input coil / the coil connected to the (a.c.) supply
      • secondary: the output coil / the coil connected to the load
    2. (b)Vs = Vp × Ns ÷ Np = 6.0 × 2000 ÷ 400 = 30 V [2]

      • Vp/Vs = Np/Ns or 6.0 × 2000 ÷ 400
      • 30 V
    3. (c)Step-up: the secondary has more turns than the primary, so the output voltage is greater than the input voltage. [2]

      • step-up
      • more turns on the secondary (output voltage greater than input voltage)
    4. (d)Soft iron is easily magnetised and demagnetised. [1]

      • easily magnetised (and demagnetised)

    Revise: Transformers · Transformers and the National Grid simulation

  15. Question 15 (7 marks)

    1. (a)It is the process in which an unstable nucleus changes, sending out an alpha particle or a beta particle, gamma radiation, or a particle together with gamma. [2]

      • an unstable nucleus changes
      • it emits an α-particle or β-particle, γ-radiation, or a particle with γ
    2. (b)Which carbon-14 nucleus decays next, and at what moment, cannot be predicted. [1]

      • cannot predict which nucleus decays or when
    3. (c)There is no effect. Decay is spontaneous, so it is not affected by outside conditions such as temperature. [2]

      • no effect (decays at the same rate)
      • decay is spontaneous / not affected by external conditions
    4. (d)The proton number changes, rising from 6 to 7. The element is decided by the proton number, so carbon becomes nitrogen. [2]

      • proton number changes (from 6 to 7)
      • the element depends on the proton number

    Revise: Radioactive decay and decay equations · Radioactive decay and half-life simulation