Skip to content

Cambridge International · Cambridge IGCSE

Cambridge IGCSE Physics Specimen (for exams from 2023) Paper 2 Extended (0625/02)

Set by Cambridge International for Cambridge IGCSE Physics, Specimen (for exams from 2023): 45 minutes and 40 marks, on Motion, Forces, Energy, work and power, Thermal physics, Transfer of thermal energy, Waves and sound, Light and the electromagnetic spectrum, Electrical quantities, Electric circuits and electrical safety, Magnetism and electromagnetic effects, Nuclear physics, Space physics. The paper itself is on Cambridge International’s website; this page adds what it covers, how to use it and original practice questions on the same topics.

Paper facts

Series
Specimen (for exams from 2023)
Paper
Paper 2 Extended
Code
0625/02
Tier
Extended
Time
45 minutes
Marks
40
Calculator
Allowed
Syllabus
0625 (2023–2025 syllabus)
Links checked
17 November 2026

Official files

These files belong to Cambridge International. Labverse links to them and never hosts or copies them. Labverse is not affiliated with Cambridge International.

What this paper covers

12 topic groups from our map of Cambridge IGCSE Physics (0625). Revise each one with its topic pages and simulations before you sit the paper.

How to use this paper

  1. 1. Time it. Set 45 minutes for 40 marks: about 68 seconds a mark. At 23 minutes you should be roughly halfway through the marks; if you’re well behind, speed up on the short questions.
  2. 2. Sit it in one go. Open the question paper on Cambridge International’s website (the link above) and work on paper, with no notes.
  3. 3. Mark it with the official scheme. Give a mark only when your answer matches a marking point. Be strict with yourself: it’s the gaps you find that improve your grade.
  4. 4. Learn from the marks you lost. For every lost mark, note whether it was knowledge, method, reading the question or time.
  5. 5. Log mistakes by topic. Keep one line per topic group (Motion, Forces, Energy, work and power, Thermal physics, Transfer of thermal energy, Waves and sound, Light and the electromagnetic spectrum, Electrical quantities, Electric circuits and electrical safety, Magnetism and electromagnetic effects, Nuclear physics, Space physics) and add a tally each time a mark goes there.
  6. 6. Revisit, then redo. Work through the weakest group’s topic pages and simulations, try the questions below, and come back to the paper in a week.

Practise the same topics

7 original exam-style questions on this paper’s topics, written in the style of Cambridge IGCSE (not taken from the paper). Try each one before you reveal the answer.

  1. 1.A student is given this list of quantities: acceleration, energy, gravitational field strength, mass, momentum, temperature.

    From the topic: Scalars and vectors Supplement

    1. (a)(Supplement) State what a vector quantity has that a scalar quantity does not have.

      1 mark
      Show the answer

      Answer: A direction. A vector needs one; a scalar is described by its size alone.

      Marking points

      • direction (a scalar is described by its size alone)
    2. (b)(Supplement) Write down the three vector quantities in the list.

      3 marks
      Show the answer

      Answer: Acceleration, gravitational field strength and momentum. (Our marking suggestion: lose one mark for each scalar included.)

      Marking points

      • acceleration
      • gravitational field strength
      • momentum
    3. (c)(Supplement) A weather report gives a temperature of −8 °C. Explain why temperature is a scalar even though it can be negative.

      1 mark
      Show the answer

      Answer: Temperature has no direction; the minus sign only shows that it is below 0 °C.

      Marking points

      • no direction / minus sign means below zero, not a direction
  2. 2.A delivery van is driven along a straight, level road. The forward driving force on the van is 2400 N. Air resistance of 900 N and a friction force from the road of 500 N both act backwards.

    From the topic: Resultant force

    1. (a)Calculate the size of the resultant force on the van and state its direction.

      2 marks
      Show the answer

      Answer: 2400 − 900 − 500 = 1000 N, acting forwards.

      Marking points

      • 1000 N
      • forwards / in the direction of the driving force
    2. (b)Describe how the speed of the van changes while these forces act.

      1 mark
      Show the answer

      Answer: The speed increases.

      Marking points

      • speed increases / van speeds up
    3. (c)Some time later the van travels at a constant speed. The driving force is still 2400 N and the friction force from the road is still 500 N. State the resultant force on the van now and calculate the air resistance.

      2 marks
      Show the answer

      Answer: The resultant force is zero, so air resistance = 2400 − 500 = 1900 N.

      Marking points

      • resultant force is zero
      • air resistance = 1900 N
  3. 3.A student examines a postage stamp through a converging lens with a 10 cm focal length, used as a magnifying glass.

    From the topic: Thin lenses

    1. (a)(Supplement) State how far the stamp must be from the lens.

      1 mark
      Show the answer

      Answer: Less than 10 cm: closer to the lens than the principal focus.

      Marking points

      • less than 10 cm / between the principal focus and the lens
    2. (b)(Supplement) Describe the image of the stamp that the student sees.

      3 marks
      Show the answer

      Answer: Virtual, upright and enlarged.

      Marking points

      • virtual
      • upright
      • enlarged
    3. (c)(Supplement) Explain how the position of this image is found on a ray diagram.

      2 marks
      Show the answer

      Answer: The rays leaving the lens are diverging, so they are extended backwards with dashed lines. The image is where these extensions meet, on the stamp's side of the lens.

      Marking points

      • rays diverge after the lens and are extended backwards (dashed)
      • image where the extensions meet, on the same side as the object
    4. (d)Explain why this image cannot be formed on a screen.

      1 mark
      Show the answer

      Answer: No light actually reaches the place where the image appears to be; the rays only seem to come from it.

      Marking points

      • no light reaches / meets there; rays only appear to come from it
  4. 4.(Supplement) Two horizontal metal plates are a few centimetres apart. The upper plate is positively charged and the lower plate is negatively charged.

    From the topic: Electric fields Supplement

    1. (a)Describe the electric field between the plates, away from their edges.

      3 marks
      Show the answer

      Answer: The lines are straight and parallel, evenly spaced and at right angles to the plates. They point downwards, from the positive plate towards the negative one.

      Marking points

      • straight, parallel lines
      • evenly spaced / at right angles to the plates
      • directed from the positive (upper) plate to the negative (lower) plate
    2. (b)A small negatively charged oil drop is between the plates. State the direction of the electric force on the drop and explain your answer.

      2 marks
      Show the answer

      Answer: Upwards, towards the positive plate. The force on a negative charge acts in the opposite direction to the field, which points down.

      Marking points

      • upwards / towards the positive plate
      • force on a negative charge is opposite to the field direction
    3. (c)The drop moves to a point nearer the lower plate, still well away from the edges. State what happens to the size of the electric force on it. Give a reason.

      2 marks
      Show the answer

      Answer: It stays the same, because the field between the plates is uniform.

      Marking points

      • stays the same
      • the field is uniform (the same strength everywhere in the gap)
  5. 5.In a student flat, a heater, a kettle and a toaster are all plugged into one extension lead. The lead is plugged into a single wall socket.

    From the topic: Electrical safety

    1. (a)Explain why this is a hazard.

      2 marks
      Show the answer

      Answer: The appliances are in parallel, so their currents add. The total current in the lead, plug and socket is larger than they are designed for (overloading), so they overheat and could start a fire.

      Marking points

      • the currents add up, so the total current is too large (overloading)
      • the lead / plug / socket overheats and could start a fire
    2. (b)The heater's cable has cracked insulation. Explain why this is dangerous.

      2 marks
      Show the answer

      Answer: A live conductor may be exposed, and touching it could give an electric shock. The live and neutral conductors could also touch, causing a short circuit: a large current that could overheat the cable and start a fire.

      Marking points

      • an exposed live conductor could give an electric shock if touched
      • live and neutral could touch: a short circuit / large current / fire
    3. (c)State why it is dangerous to use a hairdryer with wet hands.

      2 marks
      Show the answer

      Answer: Impure water conducts electricity, so a current can pass through the person to earth, giving an electric shock.

      Marking points

      • (impure) water conducts electricity
      • a current can pass through the person to earth / electric shock
  6. 6.A street lamp in Dubai is switched on by a relay. After dark, a light-sensing circuit passes a small current through the relay's coil, which is wound on a soft iron core. The relay then closes a separate circuit that supplies the lamp from the mains.

    From the topic: Magnetic effect of a current

    1. (a)Describe how the relay switches the lamp on.

      4 marks
      Show the answer

      Answer: The current in the coil produces a magnetic field, which magnetises the soft iron core. The core attracts the iron armature, which pivots and pushes the contacts together. That completes the lamp's circuit, so a current flows and the lamp lights.

      Marking points

      • current in the coil produces a magnetic field (the core is magnetised)
      • the core pulls the (iron) armature towards it
      • the armature pivots and pushes the contacts together (closes the switch)
      • the lamp circuit is complete, so current flows in the lamp
    2. (b)Suggest why soft iron, rather than steel, is used for the relay's core.

      2 marks
      Show the answer

      Answer: Soft iron is a temporary magnet: once the coil current stops, its magnetism disappears, the armature springs back and the lamp goes off. A steel core would remain magnetised.

      Marking points

      • soft iron loses its magnetism when the coil current stops (temporary magnet)
      • so the armature is released and the lamp can go off (steel would stay magnetised)
    3. (c)Suggest one advantage of using a relay instead of passing the lamp's current through the light-sensing circuit.

      1 mark
      Show the answer

      Answer: The sensing circuit only has to carry a small current, so it can work at low voltage with thin wires and is kept separate from the mains.

      Marking points

      • the sensing circuit carries only a small current / is kept separate from the mains (safer)
  7. 7.Four radioactive isotopes are available. J emits alpha particles and has a half-life of 430 years. K emits beta particles and has a half-life of 29 years. L emits gamma rays and has a half-life of 5.3 years. M emits gamma rays and has a half-life of 6 hours.

    From the topic: Half-life

    1. (a)(Supplement) State which isotope should be used in a household smoke alarm, and explain your choice.

      3 marks
      Show the answer

      Answer: J. Its alpha particles ionise the air inside the alarm strongly, but their short range means they do not escape from it. Its long half-life means the source does not need replacing during the life of the alarm.

      Marking points

      • J
      • alpha is strongly ionising and has a short range (stays inside the alarm)
      • long half-life, so the source lasts the life of the alarm
    2. (b)(Supplement) A paper mill uses isotope K to control the thickness of its paper. Explain why beta particles are suitable for this.

      2 marks
      Show the answer

      Answer: Paper absorbs some of the beta particles, and a thicker sheet absorbs more, so the count rate changes clearly with thickness. Alpha particles would all be absorbed, and gamma rays would pass through almost unaffected.

      Marking points

      • beta is partly absorbed by paper
      • so the count rate changes with thickness (alpha all absorbed / gamma hardly affected)
    3. (c)(Supplement) Explain why isotope M, not isotope L, is used as a tracer to help diagnose cancer.

      2 marks
      Show the answer

      Answer: Both emit gamma rays, which can leave the body and be detected. M's half-life of 6 hours lasts long enough for the scan, but the radiation then dies away quickly; L would keep exposing the patient for years.

      Marking points

      • M's short half-life lasts the scan but then the count rate falls quickly
      • L's long half-life would expose the patient for years
    4. (d)(Supplement) Suggest why isotope L is suitable for sterilising medical equipment that is sealed in plastic bags.

      2 marks
      Show the answer

      Answer: Its gamma rays pass through the plastic and kill the bacteria inside. Its half-life of 5.3 years means the source keeps working for years without needing to be replaced often.

      Marking points

      • gamma penetrates the packaging to kill bacteria
      • long half-life, so the source lasts for years

Paper 2 Extended in other series