Skip to content

An original Labverse practice paper — not an official exam paper

Cambridge IGCSE Physics (0625)

Cambridge IGCSE Physics Paper 2 practice paper B

Written by Labverse from our own exam-style questions, to the same time and total marks as Cambridge International’s Paper 2 (0625/21, 0625/22, 0625/23), on the same topics. It is not set, checked or endorsed by Cambridge International.

Time allowed
45 minutes
Total marks
40
Questions
40
Level
Extended

Instructions

  • Answer every question. Work in one sitting and stop when the time is up.
  • Each question has one correct answer. Choose A, B, C or D. Each question is worth 1 mark.

To print the answers too, open the mark scheme at the end first.

Marks by topic

  • Motion · 4 marks
  • Forces · 4 marks
  • Energy, work and power · 3 marks
  • Thermal physics · 3 marks
  • Transfer of thermal energy · 2 marks
  • Waves and sound · 4 marks
  • Light and the electromagnetic spectrum · 3 marks
  • Electrical quantities · 4 marks
  • Electric circuits and electrical safety · 2 marks
  • Magnetism and electromagnetic effects · 5 marks
  • Nuclear physics · 4 marks
  • Space physics · 2 marks

Questions

  1. Which statement about the acceleration of free fall close to the Earth's surface is correct?

    1. AIt is zero at the moment an object is released.
    2. BIt is about 9.8 m/s and depends on the mass of the object.
    3. CIt increases steadily as an object falls.
    4. DIt is approximately constant, at about 9.8 m/s².
  2. (Supplement) A ball of mass 0.50 kg falls through air. At one instant the air resistance on it is 1.5 N. Taking g = 9.8 m/s², what is its acceleration at that instant?

    1. A9.8 m/s²
    2. B6.8 m/s²
    3. C3.0 m/s²
    4. D12.8 m/s²
  3. Question 3Mass and weight

    Which of these quantities is a force?

    1. AGravitational field strength
    2. BAcceleration of free fall
    3. CMass
    4. DWeight
  4. Question 4Mass and weight

    Which statement about the gravitational field strength near the Earth's surface is correct?

    1. AIt is the mass per unit force, about 9.8 kg/N.
    2. BIt is the weight of a 9.8 kg mass.
    3. CIt is about 9.8 N/kg, but it is unrelated to how fast falling objects speed up.
    4. DIt is the gravitational force per unit mass, about 9.8 N/kg, equivalent to an acceleration of 9.8 m/s².
  5. A mass of 300 g is hung on a spring. Taking g as 9.8 N/kg, what is the load on the spring?

    1. A2.94 N
    2. B300 N
    3. C2940 N
    4. D30.6 N
  6. Question 6Force, mass and accelerationSupplement

    (Supplement) A resultant force of 12 N acts on a mass of 3.0 kg. What is the acceleration?

    1. A4.0 m/s²
    2. B36 m/s²
    3. C9.0 m/s²
    4. D0.25 m/s²
  7. A box is tilted onto one edge and released. It falls back onto its base. What must have been true when it was released?

    1. AIts centre of gravity was outside the box.
    2. BThe vertical line through its centre of gravity passed through its base.
    3. CIts weight was zero.
    4. DThe vertical line through its centre of gravity passed outside its base.
  8. Where is the centre of gravity of a uniform metal ring?

    1. AAt the top of the ring, on the metal
    2. BAt the centre of the ring, in the empty space
    3. CA ring has no centre of gravity
    4. DAt the bottom of the ring, on the metal
  9. Question 9Work done

    Which of these is equal to one joule?

    1. AOne newton per metre
    2. BOne newton per second
    3. COne newton metre
    4. DOne kilogram metre
  10. Question 10Energy resources

    (Supplement) How is energy released in the Sun?

    1. AFusion of light nuclei
    2. BRadioactive decay of helium
    3. CBurning of hydrogen gas
    4. DFission of uranium nuclei
  11. Question 11Efficiency

    Where does most of the energy wasted by a car engine end up?

    1. AIn the kinetic store of the car
    2. BBack in the chemical store of the fuel
    3. CNowhere, because it is destroyed
    4. DIn the internal (thermal) store of the surroundings
  12. Which describes the particles in a liquid?

    1. ATouching in a regular pattern and not moving
    2. BTouching in a regular pattern and vibrating
    3. CMostly touching, jumbled, and moving past each other
    4. DFar apart and moving fast in every direction
  13. (Supplement) Blocks of equal mass are each given the same amount of energy. Which block has the largest rise in temperature?

    1. ACopper, 390 J/(kg °C)
    2. BIron, 450 J/(kg °C)
    3. CAluminium, 900 J/(kg °C)
    4. DGranite, 790 J/(kg °C)
  14. (Supplement) A student's measured specific heat capacity is higher than the accepted value. What is the most likely reason?

    1. AEnergy was lost to the surroundings, so the temperature rise was smaller than it should have been.
    2. BThe mass of the block increased as it was heated.
    3. CThe thermometer supplied extra energy to the block.
    4. DEnergy was lost to the surroundings, so the temperature rise was larger than it should have been.
  15. Question 15Convection

    Which statement describes a convection current?

    1. AEnergy passing from particle to particle in a solid
    2. BWarm fluid rising, cooling and sinking in a loop
    3. CCold fluid rising while the warm fluid stays still
    4. DInfrared waves crossing a gap with no medium
  16. In a vacuum flask, what does the vacuum between the walls prevent?

    1. AConduction and convection
    2. BReflection of infrared
    3. CAny cooling of the drink
    4. DRadiation only
  17. (Supplement) What is a rarefaction in a longitudinal wave?

    1. AA region where the particles are spread further apart
    2. BA particle pushed furthest from its rest position
    3. CThe distance from one compression to the next
    4. DA region where the particles are crowded together
  18. Plane ripples cross from deep water onto a glass plate. Which quantity stays the same?

    1. ATheir frequency
    2. BThe water depth
    3. CTheir wavelength
    4. DTheir speed
  19. Question 19Ultrasound

    (Supplement) Which is an example of non-destructive testing?

    1. AImaging a baby before it is born
    2. BCleaning jewellery in an ultrasonic bath
    3. CChecking a weld for hidden cracks
    4. DMeasuring the depth of a harbour
  20. Question 20Ultrasound

    (Supplement) Why is gel spread between the probe and the skin?

    1. ATo slow the ultrasound down
    2. BTo keep out air, which reflects it
    3. CTo stop ultrasound reaching the baby
    4. DTo cool the skin during the scan
  21. A ray meets a plane mirror at an angle of 32° to the mirror's surface. What is the angle of reflection?

    1. A64°
    2. B32°
    3. C58°
    4. D116°
  22. Question 22Thin lenses

    What is the focal length of a lens?

    1. AHow far the principal focus is from the optical centre
    2. BThe thickness of the glass at the centre of the lens
    3. CThe distance from the object to its image
    4. DThe distance between the two principal foci
  23. (Supplement) Which region of the spectrum does the syllabus give for Bluetooth?

    1. AX-rays
    2. BUltraviolet
    3. CRadio waves
    4. DGamma rays
  24. Question 24Electric fieldsSupplement

    (Supplement) What do the field lines round a lone positive point charge look like?

    1. AParallel lines all running the same way
    2. BStraight lines pointing outwards from it
    3. CStraight lines pointing in towards it
    4. DCircles drawn round and round the charge
  25. Question 25Electric current

    How should an ammeter be connected to measure the current in a lamp?

    1. Ain series with the lamp
    2. Bacross the terminals of the lamp
    3. Cin parallel with the lamp
    4. Dacross the terminals of the cell
  26. Which instrument is used to measure the e.m.f. of a battery?

    1. Anewton meter
    2. Bvoltmeter
    3. Cjoulemeter
    4. Dammeter
  27. Question 27Resistance

    (Supplement) A wire is replaced by one of the same metal and thickness but twice as long. What happens to the resistance?

    1. Ait doubles
    2. Bit stays the same
    3. Cit becomes four times larger
    4. Dit halves
  28. In which wire should the switch of a mains appliance be connected?

    1. AThe live wire
    2. BAny of the three wires
    3. CThe neutral wire
    4. DThe earth wire
  29. Inside a double-insulated hairdryer, which has no earth wire, the live wire touches the neutral wire. What protects the cable from overheating?

    1. AThe fuse in its circuit
    2. BThe plastic outer casing
    3. CThe neutral wire itself
    4. DThe hairdryer's switch
  30. (Supplement) The N pole of a magnet is pushed towards a coil in a complete circuit. What pole forms at the end of the coil nearest the magnet?

    1. AAn S pole, attracting the magnet
    2. BAn N pole, attracting the magnet
    3. CNo pole, as the coil is not iron
    4. DAn N pole, repelling the magnet
  31. Question 31The a.c. generatorSupplement

    (Supplement) The plane of a generator's coil is at right angles to the magnetic field. What is the e.m.f. at that instant?

    1. AA value of zero
    2. BHalf its largest value
    3. CEqual to the trough value
    4. DIts largest value
  32. (Supplement) The current in a solenoid is reversed but kept the same size. What happens to its magnetic field?

    1. AIt changes into circles
    2. BIts direction is reversed
    3. CIt becomes stronger inside
    4. DIt disappears completely
  33. Why is the core of a relay's coil made of soft iron?

    1. AIt conducts the large current to the load
    2. BIt is magnetic only while the coil has a current
    3. CIt keeps its magnetism after the current stops
    4. DIt is not attracted by any magnetic field
  34. Question 34The d.c. motor

    (Supplement) At which point in each turn does the split ring reverse the current in the coil?

    1. AWhen the coil's plane is at right angles to the field
    2. BWhen the coil's plane is parallel to the field
    3. CEach time the coil has turned through 45°
    4. DOnly at the moment the motor is switched on
  35. What is the nucleon number of an atom?

    1. AThe protons plus neutrons in its nucleus
    2. BThe number of electrons around its nucleus
    3. CThe number of neutrons in its nucleus
    4. DThe number of protons in its nucleus
  36. (Supplement) A nucleus emits an α-particle. How do its nucleon number A and proton number Z change?

    1. AA falls by 2 and Z falls by 4
    2. BA falls by 4 and Z falls by 2
    3. CA falls by 4 and Z is unchanged
    4. DA is unchanged and Z rises by 1
  37. (Supplement) What change takes place inside a nucleus during β-decay?

    1. AA neutron turns into a proton and an electron
    2. BA proton turns into two neutrons
    3. CTwo protons and two neutrons leave together
    4. DThe nucleus splits into two equal parts
  38. Which of these is an effect of ionising radiation on living cells?

    1. AIt magnetises the cells
    2. BIt freezes the cells solid
    3. CIt can cause mutations
    4. DIt adds mass to the cells
  39. Question 39Orbital speedSupplement

    (Supplement) Which equation gives the average orbital speed v?

    1. Av = 2πr/T
    2. Bv = rT/2π
    3. Cv = 2πT/r
    4. Dv = πr²/T
  40. Question 40Orbital speedSupplement

    (Supplement) Why is v = 2πr/T said to give the average orbital speed?

    1. ASatellites stop briefly on each orbit
    2. BEvery orbit is a perfect circle
    3. CThe value of 2π is only an estimate
    4. DReal orbits are not exact circles

End of practice paper · 40 marks in total

Mark schemeOpen it only after you have finished the paper.Show
  1. 1. D Near the Earth's surface g is approximately constant at about 9.8 m/s², and it is the same for objects of any mass. Its unit is m/s², not m/s.

    Revise: Free fall and terminal velocity

  2. 2. B Weight = 0.50 × 9.8 = 4.9 N. Resultant force = 4.9 − 1.5 = 3.4 N downwards. a = F ÷ m = 3.4 ÷ 0.50 = 6.8 m/s².

    Revise: Free fall and terminal velocity

  3. 3. D Weight is the gravitational force on an object, measured in newtons. Mass is in kg, gravitational field strength in N/kg and the acceleration of free fall in m/s².

    Revise: Mass and weight

  4. 4. D g = W ÷ m, the force on each kilogram. Because 1 N/kg is the same as 1 m/s², g is also the acceleration of free fall.

    Revise: Mass and weight

  5. 5. A Convert to kilograms first: 0.300 kg × 9.8 N/kg = 2.94 N. Using 300 instead of 0.300 gives 2940 N, and dividing by g gives 30.6.

    Revise: Springs and load–extension graphs

  6. 6. A a = F ÷ m = 12 ÷ 3.0 = 4.0 m/s². Multiplying instead of dividing gives 36, which is wrong.

    Revise: Force, mass and acceleration

  7. 7. B With the weight's line of action still over the base, the weight has a moment about the edge that turns the box back. Outside the base, the same moment would tip it over.

    Revise: Centre of gravity and stability

  8. 8. B By symmetry, the weight of a uniform ring acts through its centre. There is no metal there, which shows that a centre of gravity does not have to lie in the material.

    Revise: Centre of gravity and stability

  9. 9. C Work done = force × distance, so a 1 N force moving its object 1 m along the force does 1 N m of work, which is 1 J.

    Revise: Work done

  10. 10. A In the Sun, light nuclei, mainly hydrogen, fuse to form helium. Fission of uranium is used in today's nuclear power stations, and nothing in the Sun is burning.

    Revise: Energy resources

  11. 11. D The engine, exhaust gases and air all warm up. The wasted energy spreads into their internal (thermal) stores; none of it is destroyed.

    Revise: Efficiency

  12. 12. C Liquid particles stay close, with most of them touching, but they have no regular pattern and can move past one another. Particles are never completely still.

    Revise: Kinetic particle model of matter

  13. 13. A Δθ = ΔE ÷ (mc). With ΔE and m the same, the smallest specific heat capacity gives the largest temperature rise, so copper warms the most.

    Revise: Specific heat capacity

  14. 14. A The energy supplied is measured correctly, but some of it warms the surroundings instead of the sample. Δθ is too small, so ΔE ÷ (mΔθ) is too large.

    Revise: Specific heat capacity

  15. 15. B A convection current is a circulating flow: warm, less dense fluid rises, cools, becomes denser and sinks, then returns to the heat source. Particle-to-particle transfer in a solid is conduction, and infrared crossing a gap is radiation.

    Revise: Convection

  16. 16. A Conduction and convection both need particles, so they cannot cross a vacuum. Infrared can, which is why the walls are silvered. The drink still cools slowly over time.

    Revise: Consequences of thermal energy transfer

  17. 17. A A rarefaction is a region where the particles are further apart than normal; for sound, the pressure there is slightly lower. A crowded region is a compression.

    Revise: Transverse and longitudinal waves

  18. 18. A The vibrating bar sets the frequency, so it does not change. The water is shallower over the plate, so the speed falls and the wavelength falls with it.

    Revise: Reflection, refraction and diffraction

  19. 19. C Non-destructive testing checks a part for hidden flaws without damaging it, such as a weld, a rail or an aircraft part. Measuring depth is sonar, imaging a baby is medical scanning, and cleaning baths use ultrasound to shake off dirt.

    Revise: Ultrasound

  20. 20. B Almost all of the ultrasound would reflect at a layer of air between the probe and the skin. The gel fills that gap so the pulses can enter the body. It does not change the speed of sound in the tissue.

    Revise: Ultrasound

  21. 21. C Measure from the normal first: i = 90° − 32° = 58°. The angle of reflection equals it, so r = 58°. 116° is the angle between the two rays, and 32° is the angle to the mirror's surface.

    Revise: Reflection of light

  22. 22. A The focal length is measured between the optical centre of the lens and the principal focus. The distance between the two principal foci is twice the focal length.

    Revise: Thin lenses

  23. 23. C The syllabus gives radio waves for Bluetooth: the signal reaches through a wall but loses strength. Its real frequency, about 2.4 GHz, is usually counted as a microwave frequency, since microwaves are often treated as the shortest radio waves, but the expected answer is radio waves.

    Revise: Communication and digital signals

  24. 24. B The lines spread out radially in every direction. The arrows point away from a positive charge, because that is the way a positive test charge would be pushed.

    Revise: Electric fields

  25. 25. A All the current through the lamp must also pass through the ammeter, so the ammeter goes in series.

    Revise: Electric current

  26. 26. B E.m.f. is measured in volts, using a voltmeter connected across the terminals of the battery.

    Revise: E.m.f. and potential difference

  27. 27. A Resistance is directly proportional to length, so twice the length gives twice the resistance.

    Revise: Resistance

  28. 28. A A switch in the live wire disconnects the appliance from the high p.d. when it is off. In the neutral wire, the appliance would stop but stay live inside, and the earth wire carries no current in normal use.

    Revise: Electrical safety

  29. 29. A The short circuit makes a large current flow, which melts the fuse and cuts off the live supply. The plastic casing stops the outside becoming live but cannot limit the current, and the switch does not open by itself.

    Revise: Electrical safety

  30. 30. D The induced current acts against the change, here the approach of the N pole. So the near end becomes an N pole and repels the magnet. Like poles repel, so an N pole cannot attract it.

    Revise: Electromagnetic induction

  31. 31. A In this position the sides of the coil are moving along the field lines, so they cut none of them and no e.m.f. is induced.

    Revise: The a.c. generator

  32. 32. B With the current the other way round, every field line points the opposite way, so the N and S ends swap. The size and shape of the field do not change.

    Revise: Magnetic effect of a current

  33. 33. B Soft iron is a temporary magnet: strongly magnetised while the coil carries a current, and not magnetised once it stops, so the armature is released.

    Revise: Magnetic effect of a current

  34. 34. A The brushes cross the gaps in the ring as the coil passes the vertical, where its plane is at right angles to the field. That happens twice in every turn, once each half turn.

    Revise: The d.c. motor

  35. 35. A The nucleon number A counts every particle in the nucleus: protons plus neutrons. The number of protons alone is the proton number Z.

    Revise: The nucleus and isotopes

  36. 36. B An α-particle is 2 protons and 2 neutrons, so the nucleus loses 4 nucleons, 2 of them protons.

    Revise: Radioactive decay and decay equations

  37. 37. A In β-decay a neutron becomes a proton and an electron, and the electron is emitted as the β-particle. The nucleon number stays the same and the proton number rises by 1.

    Revise: Radioactive decay and decay equations

  38. 38. C Ionising radiation can damage DNA, causing mutations. It can also kill cells or lead to cancer.

    Revise: Radiation safety precautions

  39. 39. A One orbit covers the circumference, 2πr, in one period, T. Speed is distance divided by time, so v = 2πr/T.

    Revise: Orbital speed

  40. 40. D Real orbits are slightly elliptical, so the speed rises and falls a little during each orbit. The equation gives the mean speed over one whole orbit.

    Revise: Orbital speed