An original Labverse practice paper — not an official exam paper
Cambridge IGCSE Physics (0625)
Cambridge IGCSE Physics Paper 4 practice paper B
Written by Labverse from our own exam-style questions, to the same time and total marks as Cambridge International’s Paper 4 (0625/41, 0625/42, 0625/43), on the same topics. It is not set, checked or endorsed by Cambridge International.
- Time allowed
- 1 hour 15 minutes
- Total marks
- 80
- Questions
- 15
- Level
- Extended
Instructions
- Answer every question. Work in one sitting and stop when the time is up.
- The marks for each part are shown beside it. Use them to judge how much to write.
- Show your working for calculations and give the unit with every answer.
To print the answers too, open the mark scheme at the end first.
Marks by topic
- Motion · 3 marks
- Forces · 12 marks
- Energy, work and power · 5 marks
- Thermal physics · 3 marks
- Transfer of thermal energy · 9 marks
- Waves and sound · 8 marks
- Light and the electromagnetic spectrum · 8 marks
- Electrical quantities · 9 marks
- Electric circuits and electrical safety · 4 marks
- Magnetism and electromagnetic effects · 7 marks
- Nuclear physics · 5 marks
- Space physics · 7 marks
Questions
- Question 1 (3 marks)Distance–time and speed–time graphs
A student records the distance travelled by a toy car each second. Time / s: 0, 1, 2, 3, 4. Distance / m: 0, 0.5, 2.0, 4.5, 8.0.
(a)State how a distance–time graph of these results would show that the car is accelerating.
[1](b)Explain, using the data, how you can tell the car is speeding up.
[2]
- Question 2 (6 marks)Friction and drag
A 1200 kg car travels along a straight, level road. The driving force is 3000 N. Friction and air resistance together come to 840 N.
(a)(Supplement) Calculate the acceleration of the car.
[3](b)(Supplement) As the car goes faster, the air resistance increases. The driving force does not change. Describe and explain what happens to the acceleration.
[2](c)(Supplement) What is the total resistive force once the car reaches its top speed?
[1]
- Question 3 (6 marks)Centre of gravity and stability
A non-uniform plank P–Q is 4.0 m long and has a weight of 300 N. It balances horizontally on a narrow support placed 1.6 m from end P.
(a)State the distance of the plank's centre of gravity from P.
[1](b)The only forces on the plank are its weight and the upward push of the support. Explain why the plank balances.
[2](c)The support is moved to the middle of the plank, 2.0 m from P. A downward force F applied at end Q keeps the plank horizontal. Calculate F.
[3]
- Question 4 (5 marks)Efficiency
A to-scale Sankey diagram is drawn for a petrol engine. The input arrow is 50 mm wide and represents 2000 kJ of energy from the fuel. The useful arrow, for the work done turning the wheels, is 12.5 mm wide.
(a)(Supplement) Calculate the energy represented by the useful arrow.
[2](b)(Supplement) Calculate the efficiency of the engine.
[1](c)(Supplement) The rest of the input is shown by a single wasted arrow. State its width and the energy it represents.
[2]
- Question 5 (3 marks)Brownian motion
In 1827 a botanist watched tiny particles from pollen grains moving about in water and wondered whether they were alive.
(a)Suggest how the botanist could test whether living things cause the movement.
[1](b)Explain why this movement is evidence that water is made of moving particles.
[2]
- Question 6 (9 marks)Thermal radiation
A small metal plate is placed in sunlight. Its temperature rises from 25 °C and then stays constant at 48 °C.
(a)(Supplement) Explain why the temperature of the plate rises at first.
[2](b)(Supplement) Explain why the temperature then stays constant at 48 °C.
[2](c)(Supplement) A cloud then covers the Sun. State and explain how the temperature of the plate changes.
[2](d)(Supplement) Explain how an increase in greenhouse gases in the atmosphere raises the average temperature of the Earth's surface.
[3]
- Question 7 (1 mark)Reflection, refraction and diffraction
A student uses a ripple tank. A vibrating straight bar sends plane waves towards a straight metal barrier, which is placed at an angle to the wavefronts.
(a)State the name given to the construction line at 90° to the barrier where a wave meets it.
[1]
- Question 8 (7 marks)Sound waves
A drummer in a school band hits a drum. The drum skin vibrates, and the sound travels through the air to the audience.
(a)Describe how the vibrating drum skin produces a sound wave in the air.
[2](b)Sound is a longitudinal wave. State what this means.
[1](c)The drummer hits the drum harder. State how the sound changes, and name the property of the wave that causes this change.
[2](d)A smaller drum gives a note of higher pitch. State how the frequency of this note compares with the first.
[1](e)State the approximate range of frequencies that humans can hear.
[1]
- Question 9 (8 marks)Electromagnetic spectrum
A radio station in Nairobi broadcasts at a frequency of 9.6 × 10⁷ Hz. Electromagnetic waves travel through air at 3.0 × 10⁸ m/s.
(a)Calculate the wavelength used by this station.
[3](b)A microwave oven uses microwaves of wavelength 0.12 m. State whether their frequency is higher or lower than that of the radio waves. Explain your answer.
[2](c)State the harmful effect on people of too much exposure to microwaves.
[1](d)State two uses of microwaves other than cooking.
[2]
- Question 10 (5 marks)Electric fieldsSupplement
(Supplement) An isolated metal sphere on an insulating stand is given a positive charge.
(a)Describe the electric field pattern around the sphere, including its direction.
[3](b)The sphere is given a negative charge of the same size instead. State how the field pattern changes.
[1](c)A small positive charge is placed near the negatively charged sphere. In which direction does the force on it act?
[1]
- Question 11 (4 marks)E.m.f. and potential difference
A small electric motor runs from a 9.0 V battery.
(a)State what is meant by the e.m.f. of the battery.
[2](b)(Supplement) Calculate the work done by the battery when 30 C of charge flows round the circuit.
[2]
- Question 12 (4 marks)Circuit diagrams and components
A student connects a light-emitting diode (LED), a resistor and a battery in series. The LED lights up.
(a)(Supplement) The student turns the LED round in the circuit. State and explain what happens.
[2](b)(Supplement) Describe the circuit symbol for an LED.
[2]
- Question 13 (7 marks)Force on a current-carrying conductor
A teacher in Lima hangs a short length of bare copper wire from two thin, flexible leads so that it hangs between the two poles of a horseshoe magnet. The leads go to a low-voltage d.c. supply and a switch.
(a)Describe how the teacher uses this apparatus to show that a force acts on the wire while it carries a current. Include what the class sees.
[3](b)State two separate changes, each of which makes the wire move the opposite way.
[2](c)The teacher now makes both changes together. Explain why the wire moves the same way as it did at the start.
[2]
- Question 14 (5 marks)Alpha particle scatteringSupplement
In a computer model of the scattering experiment, about 1 alpha particle in every 26 000 is deflected through more than 90°.
(a)(Supplement) Explain why such a small fraction of the alpha particles is deflected through more than 90°.
[2](b)(Supplement) The model is run until 52 000 alpha particles have been detected. Calculate the number expected to be deflected through more than 90°.
[1](c)(Supplement) Suggest why the metal foil used in the experiment must be very thin.
[2]
- Question 15 (7 marks)The Sun, stars and their life cycle
The Sun is a star in the Milky Way galaxy.
(a)State the two elements that make up most of the Sun.
[2](b)The Sun radiates most of its energy in three regions of the electromagnetic spectrum. Name the three regions.
[2](c)State how the size of the Sun compares with that of other stars.
[1](d)State what a galaxy is made of.
[1](e)Compare the distance from the Earth to the other stars in the Milky Way with the distance from the Earth to the Sun.
[1]
End of practice paper · 80 marks in total
Mark schemeOpen it only after you have finished the paper.ShowHide
Question 1 (3 marks)
(a)The line would curve upwards, getting steeper. [1]
- curve whose gradient increases / gets steeper
(b)The distance covered in each second increases: 0.5 m, then 1.5 m, then 2.5 m, then 3.5 m. Covering more distance in each equal time means the speed is increasing. [2]
- distance per second increases (0.5, 1.5, 2.5, 3.5 m)
- so speed is increasing
Revise: Distance–time and speed–time graphs · Motion graphs simulation
Question 2 (6 marks)
(a)Resultant force = 3000 − 840 = 2160 N; a = F ÷ m = 2160 ÷ 1200 = 1.8 m/s² [3]
- resultant force = 2160 N
- a = F ÷ m used with the resultant force
- 1.8 m/s²
(b)The acceleration decreases, because the resultant force gets smaller while the mass stays the same. [2]
- acceleration decreases
- resultant force decreases
(c)3000 N, equal to the driving force. [1]
- 3000 N
Revise: Friction and drag · Static and kinetic friction simulation
Question 3 (6 marks)
(a)1.6 m from end P, directly above the support. [1]
- 1.6 m from P / directly above the support
(b)The plank's weight acts vertically through the support, so its perpendicular distance from the support is zero and its moment about the support is zero. [2]
- weight acts through the support / pivot
- so the weight has no moment about the support
(c)The centre of gravity is now 2.0 − 1.6 = 0.40 m from the support, on the P side. Moments: F × 2.0 = 300 × 0.40 = 120 N m, so F = 60 N. [3]
- distance of centre of gravity from the support = 0.40 m
- F × 2.0 = 300 × 0.40 (clockwise moment = anticlockwise moment)
- 60 N
Revise: Centre of gravity and stability · Centre of mass and stability simulation
Question 4 (5 marks)
(a)12.5 ÷ 50 = 0.25, and 0.25 × 2000 = 500 kJ [2]
- 12.5 ÷ 50 or 0.25 seen
- 500 kJ
(b)500 ÷ 2000 × 100% = 25% [1]
- 25% (0.25)
(c)50 − 12.5 = 37.5 mm, representing 2000 − 500 = 1500 kJ. [2]
- 37.5 mm
- 1500 kJ
Question 5 (3 marks)
(a)Repeat the observation with tiny non-living particles, such as powdered glass, and see whether they move in the same way. [1]
- observe non-living particles (e.g. powdered glass or rock) in water and see whether they also move
(b)The pollen particles are being pushed by something too small to see. The only explanation is that water consists of tiny particles that are constantly moving at random and colliding with the pollen particles. [2]
- the visible particles are being hit (pushed) by something too small to see
- so water must be made of tiny particles in constant random motion
Revise: Brownian motion · Particle model and states of matter simulation
Question 6 (9 marks)
(a)At first the plate absorbs energy from the sunlight faster than it loses energy, so its temperature increases. [2]
- energy is received (absorbed) faster than it is lost (emitted)
- so the temperature rises
(b)As the plate gets hotter it emits and loses energy faster. At 48 °C it loses energy exactly as fast as it absorbs it, so the temperature stops changing. [2]
- a hotter plate emits (loses) energy faster
- at 48 °C the rate of losing energy equals the rate of absorbing it
(c)The temperature falls, because the plate now receives energy at a lower rate than it loses energy. [2]
- the temperature falls
- energy is now received more slowly than it is lost
(d)Greenhouse gases absorb some of the infrared emitted by the Earth's surface and re-emit part of it back towards the surface, so less energy escapes to space. The surface then gains energy faster than it loses it, so it warms up until the two rates are equal again. [3]
- greenhouse gases absorb (some) infrared emitted by the Earth's surface
- part of it is re-emitted back towards the surface / less escapes to space
- energy is gained faster than it is lost, so the surface warms (until gains and losses balance again)
Revise: Thermal radiation · Conduction, convection and radiation simulation
Question 7 (1 mark)
(a)The normal. [1]
- normal
Revise: Reflection, refraction and diffraction · Ripple tank simulation
Question 8 (7 marks)
(a)As the skin moves outwards it pushes the nearby air particles together, and as it moves back they spread out. Each particle passes the vibration on to its neighbours, so the sound travels outwards. [2]
- vibrating skin pushes and pulls on (makes vibrate) the air particles next to it
- vibration passed on from particle to particle through the air
(b)The particles vibrate parallel to the direction in which the wave travels. [1]
- vibrations parallel to (along) the direction of travel (propagation)
(c)The sound is louder, because its amplitude is larger. [2]
- louder
- larger amplitude
(d)Its frequency is higher. [1]
- higher frequency
(e)20 Hz to 20 000 Hz [1]
- 20 Hz to 20 000 Hz (both values needed; accept 20 kHz)
Revise: Sound waves · Sound waves and the oscilloscope simulation
Question 9 (8 marks)
(a)λ = v ÷ f = 3.0 × 10⁸ ÷ 9.6 × 10⁷ = 3.1 m [3]
- λ = v ÷ f (or v = fλ) seen
- 3.0 × 10⁸ ÷ 9.6 × 10⁷ seen
- 3.1 m (accept 3.13 m)
(b)Higher. Both waves travel at the same speed, and the microwaves have the shorter wavelength, so f = v ÷ λ is larger. [2]
- higher
- same speed but shorter wavelength (so f = v ÷ λ is larger)
(c)Body cells are heated from the inside. [1]
- cells heated inside the body
(d)Satellite television and mobile phones. [2]
- one from: satellite television (or other links with satellites); mobile (cell) phones; wireless internet (Wi-Fi)
- a second, different use from that list
Revise: Electromagnetic spectrum · Electromagnetic spectrum simulation
Question 10 (5 marks)
(a)Straight lines radiate from the sphere as if from its centre. Each line meets the surface at right angles, and the lines are evenly spaced all round. The arrows point away from the sphere. [3]
- straight radial lines (as if from the centre)
- lines at right angles to the surface / evenly spaced all round the sphere
- arrows pointing away from (out of) the sphere
(b)Only the direction changes: the arrows now point in towards the sphere, while the shape of the pattern stays the same. [1]
- arrows reversed / point towards the sphere (same shape)
(c)Towards the sphere, along the field lines. [1]
- towards the sphere
Revise: Electric fields · Static electricity and electric fields simulation
Question 11 (4 marks)
(a)The electrical work done by the battery in moving unit charge (one coulomb) around a complete circuit. [2]
- (electrical) work done by the source/battery
- in moving unit charge around a complete circuit
(b)W = EQ = 9.0 × 30 = 270 J [2]
- W = EQ or 9.0 × 30
- 270 J
Revise: E.m.f. and potential difference · Circuit builder simulation
Question 12 (4 marks)
(a)The LED goes out because there is no current. A diode only lets current pass in one direction. [2]
- LED does not light / no current
- a diode conducts in one direction only
(b)A diode symbol (a triangle with a bar across its point) with two arrows pointing away from it. [2]
- triangle with a bar (diode symbol)
- two arrows pointing outwards
Revise: Circuit diagrams and components · Circuit builder simulation
Question 13 (7 marks)
(a)With the wire at rest in the gap, the teacher closes the switch so that a current flows. The wire jumps (swings) sideways, out of or into the gap. When the switch is opened, the wire falls back to where it was. [3]
- switch closed so that a current flows in the wire (in the field)
- the wire moves / jumps / swings (sideways, into or out of the gap)
- no current (switch open) means no movement / wire returns to rest
(b)Make the current flow the other way, by swapping over the leads at the supply. Or turn the magnet round so that N and S change sides, which reverses the field. [2]
- current flows the other way (supply leads swapped over)
- field reversed (magnet turned round so that N and S change sides)
(c)Each change on its own reverses the force. Two reversals cancel out, so the force points the original way. [2]
- each change alone reverses the force
- reversing twice returns the force to its original direction
Revise: Force on a current-carrying conductor · The motor effect simulation
Question 14 (5 marks)
(a)A nucleus is a tiny target inside a much larger atom, which is mostly empty. Hardly any alpha particles come near enough to a nucleus for the repulsion to send them back. [2]
- The nucleus is tiny (the atom is mostly empty space)
- So hardly any alpha particles come near enough to a nucleus to be sent back
(b)52 000 ÷ 26 000 = 2 [1]
- 2
(c)A thick sheet of metal would absorb the alpha particles, because they are not very penetrating. With a thin foil, most of them pass through and reach the detector. [2]
- Thick metal would absorb (stop) the alpha particles / alpha particles have low penetration
- So with thin foil (most) alpha particles get through to be detected
Revise: Alpha particle scattering · Atomic models and Rutherford scattering simulation
Question 15 (7 marks)
(a)Hydrogen and helium. [2]
- hydrogen
- helium
(b)Infrared, visible light and ultraviolet. [2]
- any two of: infrared, visible light, ultraviolet
- the third region also named correctly
(c)It is a medium-sized star. [1]
- medium-sized (average size)
(d)Many billions of stars. [1]
- many billions of stars
(e)They are far more distant from the Earth than the Sun is. [1]
- the other stars are much further away than the Sun
Revise: The Sun, stars and their life cycle · Life cycle of stars simulation