Skip to content

An original Labverse practice paper — not an official exam paper

Cambridge IGCSE Physics (0625)

Cambridge IGCSE Physics Paper 4 practice paper A

Written by Labverse from our own exam-style questions, to the same time and total marks as Cambridge International’s Paper 4 (0625/41, 0625/42, 0625/43), on the same topics. It is not set, checked or endorsed by Cambridge International.

Time allowed
1 hour 15 minutes
Total marks
80
Questions
14
Level
Extended

Instructions

  • Answer every question. Work in one sitting and stop when the time is up.
  • The marks for each part are shown beside it. Use them to judge how much to write.
  • Show your working for calculations and give the unit with every answer.

To print the answers too, open the mark scheme at the end first.

Marks by topic

  • Motion · 5 marks
  • Forces · 15 marks
  • Energy, work and power · 8 marks
  • Thermal physics · 7 marks
  • Waves and sound · 7 marks
  • Light and the electromagnetic spectrum · 4 marks
  • Electrical quantities · 10 marks
  • Electric circuits and electrical safety · 7 marks
  • Magnetism and electromagnetic effects · 6 marks
  • Nuclear physics · 6 marks
  • Space physics · 5 marks

Questions

  1. Question 1 (5 marks)Scalars and vectorsSupplement

    A student is given this list of quantities: acceleration, energy, gravitational field strength, mass, momentum, temperature.

    1. (a)(Supplement) State what a vector quantity has that a scalar quantity does not have.

      [1]
    2. (b)(Supplement) Write down the three vector quantities in the list.

      [3]
    3. (c)(Supplement) A weather report gives a temperature of −8 °C. Explain why temperature is a scalar even though it can be negative.

      [1]
  2. A student wants to find the centre of gravity of a flat piece of card with an irregular shape. The student has a pin, a clamp and stand, a plumb line, a pencil and a ruler.

    1. (a)State what is meant by the term centre of gravity.

      [1]
    2. (b)Describe how the student uses the apparatus to find the centre of gravity of the card.

      [4]
    3. (c)Suggest one way of improving the accuracy of the result.

      [1]
    4. (d)When the hanging card has stopped moving, its centre of gravity is on the plumb line. Explain why.

      [2]
  3. Two desk lamps have the same shape and the same total mass. Lamp X has a heavy metal base and a light shade. Lamp Y has a light plastic base and a heavy shade.

    1. (a)State which lamp is more stable. Explain your answer.

      [3]
    2. (b)Lamp X is tilted slightly and released. Its weight still acts along a line that meets its base. Describe and explain what happens.

      [2]
    3. (c)Racing cars are designed to be very stable. State two features of their design that help with this.

      [2]
  4. Question 4 (8 marks)Energy stores and transfers

    A child of mass 25 kg slides from rest down a playground slide whose top is 3.2 m above its bottom. At the bottom, the child's speed is 6.0 m/s. Take g as 9.8 N/kg.

    1. (a)(Supplement) Calculate the decrease in the child's gravitational potential energy.

      [2]
    2. (b)(Supplement) Calculate the child's kinetic energy at the bottom of the slide.

      [2]
    3. (c)(Supplement) Calculate the energy transferred to other stores, and state where it goes.

      [2]
    4. (d)(Supplement) A Sankey diagram for the slide has an input arrow 50 mm wide. Calculate the width of the arrow for the child's kinetic energy at the bottom.

      [2]
  5. A cook in Lima pours oil from a tall narrow bottle into a wide shallow pan. The oil spreads across the bottom of the pan.

    1. (a)State two properties of a liquid that this shows.

      [2]
    2. (b)(Supplement) Use ideas about the forces between particles, and how the particles move, to explain why a liquid can flow but a solid cannot.

      [3]
    3. (c)(Supplement) Explain why a gas has no fixed volume.

      [2]
  6. Question 6 (7 marks)Speed of sound and echoes

    A student stands 102 m from a tall brick wall on open ground. The student claps, and the sound reflects from the wall.

    1. (a)Suggest why the student uses a tall brick wall rather than a hedge.

      [1]
    2. (b)The student claps in time with the echoes. A friend times 20 intervals between claps as 12.0 s. Calculate the speed of sound.

      [3]
    3. (c)Explain why the friend times 20 intervals rather than a single echo.

      [2]
    4. (d)State one other way to improve the reliability of the result.

      [1]
  7. Optical fibres laid under the sea carry telephone calls and internet data between countries.

    1. (a)(Supplement) Explain how light is kept inside an optical fibre.

      [3]
    2. (b)(Supplement) Suggest one advantage of optical fibres over copper cables for telecommunications.

      [1]
  8. Question 8 (6 marks)Electric charge

    A rubbed acetate rod is positively charged. It is balanced in a paper stirrup, hung on a thread, and is free to rotate. Rods X and Y are brought near one end in turn, without touching it. X repels the hanging rod. Y attracts it.

    1. (a)State the sign of the charge on X. Explain your answer.

      [2]
    2. (b)A student concludes that Y must be negatively charged. Explain why this conclusion may be wrong.

      [2]
    3. (c)Describe a simple experiment, other than using a hanging rod, to show that a rubbed rod is charged.

      [2]
  9. A torch contains one cell and one lamp. When the torch is switched on, energy is transferred from the cell to the lamp.

    1. (a)Explain the difference between the e.m.f. of the cell and the p.d. across the lamp, in terms of energy.

      [2]
    2. (b)State the unit of e.m.f. and express it in joules and coulombs.

      [2]
  10. Question 10 (1 mark)Series and parallel circuits

    A resistor is connected across a battery. A second resistor is then connected in parallel with the first one.

    1. (a)State the effect on the combined resistance of connecting a second resistor in parallel with a first resistor.

      [1]
  11. Question 11 (6 marks)Electrical safety

    In a student flat, a heater, a kettle and a toaster are all plugged into one extension lead. The lead is plugged into a single wall socket.

    1. (a)Explain why this is a hazard.

      [2]
    2. (b)The heater's cable has cracked insulation. Explain why this is dangerous.

      [2]
    3. (c)State why it is dangerous to use a hairdryer with wet hands.

      [2]
  12. Question 12 (6 marks)Electromagnetic induction

    A teacher in Hanoi connects a long copper wire to a sensitive meter. A straight part of the wire passes horizontally through the gap of a horseshoe magnet. In the gap, the field lines run horizontally from one pole to the other, crossing the wire at 90°.

    1. (a)Describe how the wire and meter can be used to demonstrate an induced e.m.f. Include what the class sees.

      [3]
    2. (b)The teacher now moves the wire horizontally, along the field lines. State and explain what the meter shows.

      [2]
    3. (c)Suggest why a sensitive meter is needed for this experiment.

      [1]
  13. Americium-241, ²⁴¹₉₅Am, is used in smoke alarms. It decays by emitting an α-particle and becomes an isotope of neptunium (Np).

    1. (a)(Supplement) State the nucleon number and the proton number of the neptunium nucleus.

      [2]
    2. (b)(Supplement) Write the decay equation in nuclide notation.

      [3]
    3. (c)(Supplement) Suggest why a nucleus of americium-241 is unstable.

      [1]
  14. Question 14 (5 marks)The Solar System

    Neptune is about 4.5 × 10¹² m from the Sun. The speed of light is 3.0 × 10⁸ m/s.

    1. (a)How long does light from the Sun take to reach Neptune? Give your answer in hours.

      [3]
    2. (b)State one property of a planet that the gravitational field strength at its surface depends on.

      [1]
    3. (c)State how the strength of a planet's gravitational field changes as the distance from the planet increases.

      [1]

End of practice paper · 80 marks in total

Mark schemeOpen it only after you have finished the paper.Show
  1. Question 1 (5 marks)

    1. (a)A direction. A vector needs one; a scalar is described by its size alone. [1]

      • direction (a scalar is described by its size alone)
    2. (b)Acceleration, gravitational field strength and momentum. (Our marking suggestion: lose one mark for each scalar included.) [3]

      • acceleration
      • gravitational field strength
      • momentum
    3. (c)Temperature has no direction; the minus sign only shows that it is below 0 °C. [1]

      • no direction / minus sign means below zero, not a direction

    Revise: Scalars and vectors · Adding and resolving vectors simulation

  2. Question 2 (8 marks)

    1. (a)The point at which all of an object's weight may be considered to act. [1]

      • point through which the (whole) weight (appears to) act(s)
    2. (b)Make a hole near the edge and hang the card from the pin, clamped in the stand, so that it is free to swing, and hang the plumb line from that pin too. Once the card and thread have stopped moving, draw along the thread's position on the card. Do the same with the card hanging from a second hole. The lines intersect at the centre of gravity. [4]

      • card hung from the pin through a hole so it swings freely, with the plumb line also hanging from that pin
      • when at rest, the position of the plumb line is marked on the card
      • repeated with the card hung from a different hole
      • lines intersect at the centre of gravity
    3. (c)Any one, for example: use holes that are far apart; hang from a third hole as a check; wait until the card is completely still; use thin pencil lines; make sure the card swings freely on the pin. [1]

      • any one valid precaution, e.g. holes far apart / third hole as a check / wait until still / thin lines / card free to swing
    4. (d)With the card still, the moments about the pin cancel, so the weight's line of action passes vertically through the pin. G is therefore straight below the pin, along the thread. [2]

      • no resultant moment (about the pin) when at rest
      • so the weight acts vertically through the pin / G lies vertically below the pin

    Revise: Centre of gravity and stability · Centre of mass and stability simulation

  3. Question 3 (7 marks)

    1. (a)Lamp X. Its centre of gravity is lower, so it can be tilted further before the vertical through its centre of gravity leaves the base and it topples. [3]

      • lamp X
      • lower centre of gravity
      • can tilt further before the vertical through the centre of gravity leaves the base
    2. (b)It falls back onto its base (returns upright), because the weight's moment about the tipping edge rotates it back. [2]

      • returns to its upright position / falls back onto its base
      • weight has a moment about the edge (pivot) that turns it back
    3. (c)A low centre of gravity (low body, heavy parts mounted low down) and a wide base (wheels far apart). [2]

      • low centre of gravity
      • wide base / wheels far apart

    Revise: Centre of gravity and stability · Centre of mass and stability simulation

  4. Question 4 (8 marks)

    1. (a)ΔEp = mgΔh = 25 × 9.8 × 3.2 = 784 J [2]

      • 25 × 9.8 × 3.2 seen
      • 784 J
    2. (b)Ek = ½mv² = ½ × 25 × 6.0² = 450 J [2]

      • ½ × 25 × 6.0² seen
      • 450 J
    3. (c)784 − 450 = 334 J. Work done against friction and air resistance moves it to the internal (thermal) store of the child, the slide and the air (a little leaves as sound). [2]

      • 334 J
      • internal (thermal) store of slide / child / air, or sound
    4. (d)450 ÷ 784 = 0.574, and 0.574 × 50 = 28.7 mm (29 mm). [2]

      • 450 ÷ 784 or 0.574 seen
      • 28.7 mm (29 mm)

    Revise: Energy stores and transfers · Energy stores and transfers simulation

  5. Question 5 (7 marks)

    1. (a)A liquid can flow (be poured), and it takes the shape of its container while its volume stays the same. [2]

      • one property from: flows (can be poured); takes the shape of its container; volume stays the same (fixed volume)
      • a second, different property from the same list
    2. (b)In a solid, strong attractive forces hold each particle in a fixed position, so it can only vibrate. In a liquid the particles are still held close together by attractive forces, but they have enough energy to move past one another, so the liquid can flow. [3]

      • solid: strong forces hold particles in fixed positions (they only vibrate)
      • liquid: particles can move (slide) past one another
      • liquid particles have enough energy to change places / forces cannot hold them in fixed positions
    3. (c)The forces between gas particles are very weak because the particles are far apart, so nothing holds them together. They move freely and spread out to fill any container. [2]

      • forces between gas particles are very weak (negligible)
      • particles move freely and spread out to fill the container

    Revise: Kinetic particle model of matter · Particle model and states of matter simulation

  6. Question 6 (7 marks)

    1. (a)A large, hard, flat surface reflects sound strongly and gives a clear echo; a hedge absorbs and scatters much of the sound. [1]

      • a hard, flat surface reflects sound well (a hedge absorbs or scatters it)
    2. (b)Time for one interval = 12.0 ÷ 20 = 0.600 s. Distance in one interval = 2 × 102 = 204 m. v = s ÷ t = 204 ÷ 0.600 = 340 m/s. [3]

      • 12.0 ÷ 20 = 0.600 s
      • distance = 2 × 102 = 204 m
      • v = 204 ÷ 0.600 = 340 m/s
    3. (c)Starting and stopping the stopwatch involves a reaction-time error of roughly the same size whatever is being timed. Over 20 intervals, that error is a much smaller fraction of the time measured. [2]

      • reaction time causes an error (of about the same size) at the start and stop
      • the error is a much smaller fraction (percentage) of a longer measured time
    4. (d)Repeat the timing several times and take the mean. (Also accept: stand further from the wall, or use a microphone and electronic timer.) [1]

      • repeat and find the mean / move further from the wall / use electronic timing

    Revise: Speed of sound and echoes · Speed of sound and echoes simulation

  7. Question 7 (4 marks)

    1. (a)The light hits the inner surface of the fibre at an angle of incidence greater than the critical angle, so it is totally internally reflected. This happens again and again along the fibre, even where it bends. [3]

      • angle of incidence at the fibre surface greater than the critical angle
      • total internal reflection occurs
      • repeated reflections along the length of the fibre (including round bends)
    2. (b)They can carry much more data, with less energy loss and no electrical interference. [1]

      • more data / faster transfer / less energy loss / no electrical interference / lighter

    Revise: Critical angle and total internal reflection · Refraction and Snell's law simulation

  8. Question 8 (6 marks)

    1. (a)Positive, because charges of the same sign repel each other. [2]

      • positive
      • like (same-sign) charges repel
    2. (b)Y could be uncharged. A charged object attracts uncharged objects as well as oppositely charged ones, so attraction alone does not prove the sign. [2]

      • Y could be uncharged
      • uncharged objects are also attracted / only repulsion proves the sign
    3. (c)Hold the rod just above some tiny pieces of paper. If the pieces jump up to the rod, it is charged. [2]

      • hold the rod close to small pieces of paper (or a thin stream of water)
      • the paper is attracted / jumps to the rod (the water bends towards it)

    Revise: Electric charge · Static electricity and electric fields simulation

  9. Question 9 (4 marks)

    1. (a)The e.m.f. is the energy (work) the cell gives to each unit of charge. The p.d. is the energy each unit of charge transfers to the lamp. [2]

      • e.m.f.: work done by the cell on each unit charge (energy given to charge)
      • p.d.: energy transferred by each unit charge in the lamp
    2. (b)The volt (V); 1 V = 1 J/C. [2]

      • volt (V)
      • 1 V = 1 J/C (joule per coulomb)

    Revise: E.m.f. and potential difference · Circuit builder simulation

  10. Question 10 (1 mark)

    1. (a)The combined resistance decreases; it is less than that of either resistor. [1]

      • combined resistance decreases / less than either resistor

    Revise: Series and parallel circuits · Circuit builder simulation

  11. Question 11 (6 marks)

    1. (a)The appliances are in parallel, so their currents add. The total current in the lead, plug and socket is larger than they are designed for (overloading), so they overheat and could start a fire. [2]

      • the currents add up, so the total current is too large (overloading)
      • the lead / plug / socket overheats and could start a fire
    2. (b)A live conductor may be exposed, and touching it could give an electric shock. The live and neutral conductors could also touch, causing a short circuit: a large current that could overheat the cable and start a fire. [2]

      • an exposed live conductor could give an electric shock if touched
      • live and neutral could touch: a short circuit / large current / fire
    3. (c)Impure water conducts electricity, so a current can pass through the person to earth, giving an electric shock. [2]

      • (impure) water conducts electricity
      • a current can pass through the person to earth / electric shock

    Revise: Electrical safety · Mains electricity and safety simulation

  12. Question 12 (6 marks)

    1. (a)Move the wire up (or down) through the gap. The meter needle moves while the wire is moving. When the wire stops the reading is zero, and moving it the other way makes the needle move the other way. [3]

      • move the wire up or down through the gap (across the field)
      • the meter deflects while the wire is moving
      • no reading when the wire is still / opposite deflection when moved the opposite way
    2. (b)Zero, because the wire is moving along the field lines and is not cutting across any of them. [2]

      • zero / no deflection
      • the wire is not cutting (crossing) the field lines
    3. (c)The induced e.m.f. and current from a single wire are very small. [1]

      • the induced e.m.f. / current is very small

    Revise: Electromagnetic induction · Electromagnetic induction simulation

  13. Question 13 (6 marks)

    1. (a)Nucleon number 237; proton number 93. [2]

      • nucleon number 237
      • proton number 93
    2. (b)²⁴¹₉₅Am → ²³⁷₉₃Np + ⁴₂He [3]

      • ⁴₂He (or ⁴₂α) for the α-particle
      • ²³⁷₉₃Np
      • ²⁴¹₉₅Am on the left of the arrow, with both totals balanced (241 = 237 + 4, 95 = 93 + 2)
    3. (c)It is too heavy: it has too many nucleons to be stable. [1]

      • too heavy (too many nucleons)

    Revise: Radioactive decay and decay equations · Radioactive decay and half-life simulation

  14. Question 14 (5 marks)

    1. (a)t = s ÷ v = 4.5 × 10¹² ÷ 3.0 × 10⁸ = 1.5 × 10⁴ s. 15 000 ÷ 3600 = 4.2 hours. [3]

      • t = s ÷ v (time = distance ÷ speed)
      • 1.5 × 10⁴ s
      • 4.2 h
    2. (b)Its mass (its radius also matters). [1]

      • the mass of the planet (allow its radius or size)
    3. (c)It decreases (gets weaker). [1]

      • it decreases

    Revise: The Solar System · Orbits and gravity simulation