AQA · GCSE AQA
AQA GCSE Physics November 2020 Paper 2 Higher (8463/2H)
Set by AQA for AQA GCSE Physics, November 2020: 1 hour 45 minutes and 100 marks, on Forces, Forces and motion, Waves, Electromagnetic waves, Magnetism and electromagnetism, Space physics, Working scientifically. The paper itself is on AQA’s website; this page adds what it covers, how to use it and original practice questions on the same topics.
Paper facts
- Series
- November 2020
- Paper
- Paper 2 Higher
- Code
- 8463/2H
- Tier
- Higher
- Time
- 1 hour 45 minutes
- Marks
- 100
- Calculator
- Allowed
- Syllabus
- 8463 (first teaching 2016)
- Links checked
- 17 November 2026
Official files
- Question paper(opens AQA’s website)
- Mark scheme(opens AQA’s website)
- Examiner report(opens AQA’s website)
These files belong to AQA. Labverse links to them and never hosts or copies them. Labverse is not affiliated with AQA.
What this paper covers
7 topic groups from our map of GCSE Physics — AQA. Revise each one with its topic pages and simulations before you sit the paper.
- Forces
Scalar and vector quantities · Contact and non-contact forces · Gravity, weight and mass · Resultant forces · Work done and energy transfer · Forces and elasticity · Moments, levers and gears · Pressure in fluids · Pressure and depth in a liquid (Higher) · Upthrust and floating (Higher) · Atmospheric pressure
Adding and resolving vectorsDistance and displacementFree-body diagrams and resultant forceStatic and kinetic friction
- Forces and motion
Distance and displacement · Speed and velocity · Distance–time graphs · Acceleration · Velocity–time graphs · Free fall and terminal velocity · Newton's first law · Newton's second law · Newton's third law · Stopping distance and reaction time · Momentum and conservation of momentum (Higher) · Changes in momentum (Higher)
Distance and displacementMotion graphsCircular motionSUVAT equations of motion
- Waves
Transverse and longitudinal waves · Properties of waves · Reflection of waves · Sound waves (Higher) · Ultrasound and seismic waves (Higher)
Transverse and longitudinal wavesRipple tankReflection in a plane mirrorSound waves and the oscilloscope
- Electromagnetic waves
Electromagnetic spectrum · Refraction · Infrared radiation and surfaces · Uses and hazards of EM waves · Lenses · Visible light and colour · Black body radiation
Electromagnetic spectrumRefraction and Snell's lawRipple tankConduction, convection and radiation
- Magnetism and electromagnetism
Permanent and induced magnets · Magnetic fields · Electromagnetism and solenoids · Fleming's left-hand rule (Higher) · Electric motors (Higher) · Loudspeakers and microphones (Higher) · Induced potential (generator effect) (Higher) · Alternators and dynamos (Higher) · Transformers (Higher)
Magnetic field of a bar magnetMagnetic field around a wire and solenoidThe motor effectElectromagnetic induction
- Space physics
Our solar system · Life cycle of a star · Orbital motion and satellites · Red-shift and the Big Bang
Life cycle of starsOrbits and gravityRed-shift and the expanding universe
- Working scientifically
Measuring instruments · Accuracy, precision and errors · Units, prefixes and significant figures
Vernier caliperMicrometer screw gaugeAccuracy, precision and errorsSignificant figures, prefixes and units trainer
How to use this paper
- 1. Time it. Set 1 hour 45 minutes for 100 marks: about 63 seconds a mark. At 53 minutes you should be roughly halfway through the marks; if you’re well behind, speed up on the short questions.
- 2. Sit it in one go. Open the question paper on AQA’s website (the link above) and work on paper, with no notes.
- 3. Mark it with the official scheme. Give a mark only when your answer matches a marking point. Be strict with yourself: it’s the gaps you find that improve your grade.
- 4. Read the examiner report. It says which questions students found hardest and what the best answers did, so compare it with your own script.
- 5. Log mistakes by topic. Keep one line per topic group (Forces, Forces and motion, Waves, Electromagnetic waves, Magnetism and electromagnetism, Space physics, Working scientifically) and add a tally each time a mark goes there.
- 6. Revisit, then redo. Work through the weakest group’s topic pages and simulations, try the questions below, and come back to the paper in a week.
Practise the same topics
7 original exam-style questions on this paper’s topics, written in the style of GCSE AQA (not taken from the paper). Try each one before you reveal the answer.
1.A technician uses Vernier callipers to measure the outside diameter of a plastic pipe. The main scale is marked in millimetres. Each division on the vernier scale is worth 0.1 mm.
From the topic: Measuring instruments
(a)The vernier zero is just past the 32 mm mark on the main scale, and vernier line 7 lines up with a main-scale mark. Give the reading on the callipers.
2 marksShow the answerHide the answer
Answer: 32 mm + 7 × 0.1 mm = 32.7 mm
Marking points
- 32 + 7 × 0.1
- 32.7 mm
(b)With the jaws closed and nothing between them, the callipers read 0.2 mm. Name this type of error.
1 markShow the answerHide the answer
Answer: A zero error, which is a type of systematic error.
Marking points
- Zero error / systematic error
(c)Calculate the true diameter of the pipe.
2 marksShow the answerHide the answer
Answer: true diameter = 32.7 − 0.2 = 32.5 mm
Marking points
- 32.7 − 0.2 (allow their reading from the first part)
- 32.5 mm
(d)Explain why measuring the pipe several more times and calculating a mean would not remove this error.
2 marksShow the answerHide the answer
Answer: The zero error makes every reading too large by the same amount, 0.2 mm. The mean of readings that are all 0.2 mm too large is also 0.2 mm too large; averaging only reduces random error.
Marking points
- The error shifts every reading by the same amount in the same direction.
- So the mean is shifted by the same amount (a mean only reduces the effect of random errors).
2.A dog walker in a park walks 600 m due north along a straight path. The walker then turns round and walks 250 m back along the same path.
From the topic: Scalar and vector quantities
(a)Calculate the total distance walked.
1 markShow the answerHide the answer
Answer: 600 + 250 = 850 m
Marking points
- 850 m
(b)Determine the displacement of the dog walker at the end of the walk. Give its magnitude and direction.
2 marksShow the answerHide the answer
Answer: 600 − 250 = 350 m, north of the starting point.
Marking points
- 350 m
- North (of the starting point).
(c)Explain why the distance and the displacement have different values.
2 marksShow the answerHide the answer
Answer: Distance is the total length of the path, with no direction. Displacement compares only where the walk starts and ends, and includes a direction, so the 250 m walked back cancels part of the 600 m.
Marking points
- Distance is the whole length of the path travelled (a scalar, no direction).
- Displacement depends only on the start and finish positions and has a direction (a vector), so walking back reduces it.
3.A student sees a flash of lightning and hears the thunder 4.5 s later. The speed of sound in air is 330 m/s.
From the topic: Speed and velocity
(a)Calculate the distance to the lightning. Give your answer to 2 significant figures.
3 marksShow the answerHide the answer
Answer: s = v t = 330 × 4.5 = 1485 m, which is 1500 m to 2 significant figures.
Marking points
- s = 330 × 4.5
- s = 1485 (m)
- s = 1500 m (2 s.f.)
(b)Give one reason why the student's answer may not be accurate.
1 markShow the answerHide the answer
Answer: Human reaction time: the stopwatch may be started or stopped late.
Marking points
- Reaction time when using the stopwatch (or the speed of sound varies with conditions).
4.Required practical 8, waves in a solid. A string is tied to a vibration generator, passes over a pulley and has masses hanging from its end. At a frequency of 60 Hz, a steady pattern of 4 loops forms along 1.20 m of the string.
From the topic: Properties of waves
(a)Each loop is half a wavelength. Calculate the wavelength of the waves on the string.
2 marksShow the answerHide the answer
Answer: One loop = 1.20 ÷ 4 = 0.30 m, so λ = 2 × 0.30 = 0.60 m
Marking points
- Length of one loop = 1.20 ÷ 4 = 0.30 m
- λ = 0.60 m
(b)Calculate the speed of the waves on the string.
2 marksShow the answerHide the answer
Answer: v = f λ = 60 × 0.60 = 36 m/s
Marking points
- v = 60 × 0.60 (allow their wavelength)
- v = 36 m/s
(c)The frequency is raised to 90 Hz. The masses are not changed, so the wave speed stays the same. Calculate the new wavelength.
3 marksShow the answerHide the answer
Answer: λ = v ÷ f = 36 ÷ 90 = 0.40 m
Marking points
- λ = v ÷ f
- λ = 36 ÷ 90 (allow their speed)
- λ = 0.40 m
(d)Suggest one way to make this experiment safer.
1 markShow the answerHide the answer
Answer: Wear eye protection in case the string snaps, or keep feet clear of the masses and put something soft under them.
Marking points
- Eye protection in case the string snaps / a cushion or sand tray under the masses / keep feet clear of the masses.
5.After a marathon in London, each runner is wrapped in a thin blanket made of shiny metal foil.
From the topic: Infrared radiation and surfaces
(a)Infrared is part of the electromagnetic spectrum. Name the part of the spectrum whose wavelengths are just shorter than those of infrared.
1 markShow the answerHide the answer
Answer: Visible light (red light).
Marking points
- Visible light (allow red light).
(b)Give two properties that infrared shares with all other electromagnetic waves.
2 marksShow the answerHide the answer
Answer: Any two from: they are transverse waves; they all move at one speed through a vacuum; they can travel through a vacuum (no medium is needed); they transfer energy from a source to an absorber.
Marking points
- One correct property, e.g. transverse / all have one speed in a vacuum.
- A second correct property, e.g. needs no medium / transfers energy from source to absorber.
(c)Explain how the shiny surface of the blanket helps the runner to stay warm.
2 marksShow the answerHide the answer
Answer: A shiny surface is a poor emitter of infrared, so the blanket gives out little infrared to the surroundings. Its inner surface also reflects infrared from the runner's body back towards the runner, so less energy is transferred away.
Marking points
- Shiny surface is a poor emitter, so little infrared is given out to the surroundings.
- The shiny surface reflects infrared from the body back towards the runner / less energy is transferred away from the runner.
(d)Higher tier. A wall painted white reflects most of the visible light that falls on it, but it absorbs most of the infrared from a warm radiator. What does this show about how a material interacts with electromagnetic waves?
1 markShow the answerHide the answer
Answer: How a material absorbs or reflects electromagnetic waves can depend on their wavelength.
Marking points
- Absorption / reflection by a material varies with the wavelength of the wave.
6.A coil with slip rings turns at a steady rate in a uniform magnetic field. As it turns, the p.d. across the coil rises to a peak, falls to zero, and then does the same in the opposite direction, over and over.
From the topic: Alternators and dynamos Higher tierPhysics only
(a)State the position of the coil's plane when the p.d. is zero. Explain why the p.d. is zero in this position.
2 marksShow the answerHide the answer
Answer: Perpendicular to the field. Here the coil's sides travel parallel to the field lines, so none are cut.
Marking points
- Perpendicular (at right angles) to the field.
- The sides move along (parallel to) the field lines, so they cut none.
(b)State the position of the coil's plane when the p.d. is at its peak.
1 markShow the answerHide the answer
Answer: Parallel to the field.
Marking points
- Parallel to the magnetic field.
(c)Suggest two changes, other than turning the coil faster, that would increase the peak p.d.
2 marksShow the answerHide the answer
Answer: Fit a stronger magnet. Wind more turns onto the coil.
Marking points
- A stronger magnet (stronger magnetic field).
- More turns on the coil.
7.The Earth contains iron in its core and gold in some of its rocks.
From the topic: Life cycle of a star Physics only
(a)Name the process in stars that joins light nuclei to make heavier nuclei.
1 markShow the answerHide the answer
Answer: Nuclear fusion.
Marking points
- (nuclear) fusion
(b)Name the element made by fusion in the core of a main sequence star.
1 markShow the answerHide the answer
Answer: Helium.
Marking points
- helium
(c)Gold is an element heavier than iron. Name the event in which elements heavier than iron are produced.
1 markShow the answerHide the answer
Answer: A supernova.
Marking points
- supernova
(d)Explain how iron made inside a massive star could become part of a planet such as the Earth.
3 marksShow the answerHide the answer
Answer: The iron was made by fusion inside a massive star, a red supergiant. The star exploded as a supernova, which threw the iron and other elements out through space. The iron became part of a new cloud of dust and gas, which gravity pulled together to form a new star and its planets, such as the Sun and the Earth.
Marking points
- iron is made by fusion in a massive star (red supergiant)
- a supernova explosion spreads the iron through space / the universe
- it joins a new nebula (cloud of dust and gas) that forms a new star with planets