AQA · GCSE AQA
AQA GCSE Physics November 2020 Paper 1 Foundation (8463/1F)
Set by AQA for AQA GCSE Physics, November 2020: 1 hour 45 minutes and 100 marks, on Energy, Electricity, Particle model of matter, Atomic structure, Working scientifically. The paper itself is on AQA’s website; this page adds what it covers, how to use it and original practice questions on the same topics.
Paper facts
- Series
- November 2020
- Paper
- Paper 1 Foundation
- Code
- 8463/1F
- Tier
- Foundation
- Time
- 1 hour 45 minutes
- Marks
- 100
- Calculator
- Allowed
- Syllabus
- 8463 (first teaching 2016)
- Links checked
- 17 November 2026
Official files
- Question paper(opens AQA’s website)
- Mark scheme(opens AQA’s website)
- Examiner reportnot public
These files belong to AQA. Labverse links to them and never hosts or copies them. Labverse is not affiliated with AQA.
What this paper covers
5 topic groups from our map of GCSE Physics — AQA. Revise each one with its topic pages and simulations before you sit the paper.
- Energy
Energy stores and systems · Kinetic and potential energy · Specific heat capacity · Power · Conservation and dissipation of energy · Efficiency · Energy resources
Energy stores and transfersEnergy skate trackSpecific heat capacityPower and efficiency
- Electricity
Circuit symbols · Electrical charge and current · Current, resistance and potential difference · I–V characteristics · LDRs and thermistors · Series and parallel circuits · Mains electricity · Electrical power · Energy transfers in appliances · The National Grid · Static electricity and electric fields
Circuit builderCharge, current, energy and powerResistance of a wireI–V characteristics
- Particle model of matter
Density · Changes of state · Internal energy · Specific latent heat · Particle motion in gases · Pressure in gases
Measuring densityParticle model and states of matterLatent heat and heating curvesGas laws and particles
- Atomic structure
Structure of the atom · Mass number and isotopes · Development of the atomic model · Radioactive decay and nuclear radiation · Nuclear equations · Half-life · Contamination and irradiation · Uses and hazards of radiation · Nuclear fission and fusion
Isotopes and atom builderAtomic models and Rutherford scatteringAlpha, beta and gamma radiationNuclear equations
- Working scientifically
Measuring instruments · Accuracy, precision and errors · Units, prefixes and significant figures
Vernier caliperMicrometer screw gaugeAccuracy, precision and errorsSignificant figures, prefixes and units trainer
How to use this paper
- 1. Time it. Set 1 hour 45 minutes for 100 marks: about 63 seconds a mark. At 53 minutes you should be roughly halfway through the marks; if you’re well behind, speed up on the short questions.
- 2. Sit it in one go. Open the question paper on AQA’s website (the link above) and work on paper, with no notes.
- 3. Mark it with the official scheme. Give a mark only when your answer matches a marking point. Be strict with yourself: it’s the gaps you find that improve your grade.
- 4. Learn from the marks you lost. For every lost mark, note whether it was knowledge, method, reading the question or time.
- 5. Log mistakes by topic. Keep one line per topic group (Energy, Electricity, Particle model of matter, Atomic structure, Working scientifically) and add a tally each time a mark goes there.
- 6. Revisit, then redo. Work through the weakest group’s topic pages and simulations, try the questions below, and come back to the paper in a week.
Practise the same topics
8 original exam-style questions on this paper’s topics, written in the style of GCSE AQA (not taken from the paper). Try each one before you reveal the answer.
1.A student wants to find the density of a small steel ball bearing. Its diameter is roughly 6 mm. The student can use a 30 cm ruler marked in millimetres, a set of Vernier callipers or a micrometer.
From the topic: Measuring instruments
(a)Give the resolution of the ruler.
1 markShow the answerHide the answer
Answer: 1 mm
Marking points
- 1 mm (accept 0.1 cm)
(b)Which instrument should the student use to measure the diameter of the ball bearing? Give a reason for your answer.
2 marksShow the answerHide the answer
Answer: The micrometer, because it has the smallest resolution (0.01 mm), which is very small compared with a 6 mm diameter.
Marking points
- Micrometer (allow Vernier callipers).
- Its resolution is small compared with the 6 mm diameter (micrometer 0.01 mm, the smallest; callipers 0.1 mm), whereas the ruler's 1 mm is a large fraction of 6 mm.
(c)The student measures the diameter five times. The readings are 6.32 mm, 6.35 mm, 6.33 mm, 6.36 mm and 6.34 mm. Calculate the mean diameter.
2 marksShow the answerHide the answer
Answer: mean = (6.32 + 6.35 + 6.33 + 6.36 + 6.34) ÷ 5 = 31.70 ÷ 5 = 6.34 mm
Marking points
- Sum of the readings ÷ 5 (31.70 ÷ 5)
- 6.34 mm
(d)Use the readings to estimate the uncertainty in the mean diameter.
2 marksShow the answerHide the answer
Answer: Range = 6.36 − 6.32 = 0.04 mm. Uncertainty = half the range = ± 0.02 mm.
Marking points
- Range = 6.36 − 6.32 = 0.04 mm
- Uncertainty = ± 0.02 mm (half the range)
2.A child of mass 30 kg climbs to the top of a playground slide, 2.5 m above the ground. Gravitational field strength = 9.8 N/kg.
From the topic: Kinetic and potential energy
(a)Calculate the gravitational potential energy gained by the child.
2 marksShow the answerHide the answer
Answer: Ep = m g h = 30 × 9.8 × 2.5 = 735 J
Marking points
- Ep = 30 × 9.8 × 2.5
- Ep = 735 J
(b)The child slides down from rest and reaches the bottom at a speed of 5.0 m/s. Calculate the kinetic energy the child has there.
2 marksShow the answerHide the answer
Answer: Ek = 0.5 × 30 × 5.0² = 375 J
Marking points
- Ek = 0.5 × 30 × 5.0²
- Ek = 375 J
(c)Calculate the energy dissipated during the slide, and explain what happens to it.
3 marksShow the answerHide the answer
Answer: 735 − 375 = 360 J. Work is done against friction between the child and the slide (and against air resistance), so the energy goes to the thermal stores of the child, the slide and the surroundings, which warm up slightly.
Marking points
- 360 J (allow their answers to the parts above)
- Work is done against friction (and air resistance).
- The energy goes to thermal stores of the child, slide and surroundings, so their temperature rises.
3.A student sets up a circuit to find the resistance of a filament lamp. The circuit contains a battery, a closed switch, the lamp, an ammeter and a voltmeter.
From the topic: Circuit symbols
(a)The lamp symbol is drawn on the circuit diagram. Describe what the lamp symbol looks like.
1 markShow the answerHide the answer
Answer: A circle with a cross inside it.
Marking points
- Circle with a cross (X) drawn inside it.
(b)Describe how the ammeter and the voltmeter should be connected in the circuit.
2 marksShow the answerHide the answer
Answer: The ammeter is in series with the lamp. The voltmeter is in parallel across the lamp.
Marking points
- Ammeter connected in series with the lamp.
- Voltmeter connected in parallel with (across) the lamp.
(c)The ammeter reads 0.40 A and the voltmeter reads 2.4 V. Calculate the resistance of the lamp. Give the unit.
3 marksShow the answerHide the answer
Answer: R = V ÷ I = 2.4 ÷ 0.40 = 6.0 Ω
Marking points
- 2.4 = 0.40 × R or R = 2.4 ÷ 0.40
- R = 6.0 (accept 6)
- Unit: Ω (ohms)
4.A torch is drawn as a circuit diagram. The power supply is shown as three cell symbols joined in series, all facing the same way. Each cell has a potential difference of 1.5 V.
From the topic: Circuit symbols
(a)Give the name used for two or more cells joined together.
1 markShow the answerHide the answer
Answer: A battery.
Marking points
- Battery.
(b)Calculate the total potential difference of the three cells.
1 markShow the answerHide the answer
Answer: 3 × 1.5 = 4.5 V
Marking points
- 4.5 V
(c)State which line of a cell symbol is the positive terminal.
1 markShow the answerHide the answer
Answer: The longer, thinner line.
Marking points
- The longer (taller, thinner) line.
5.The heating element of a hair dryer has a resistance of 46 Ω. It is connected to the 230 V mains supply.
From the topic: Current, resistance and potential difference
(a)Calculate the current in the heating element.
2 marksShow the answerHide the answer
Answer: I = V ÷ R = 230 ÷ 46 = 5.0 A
Marking points
- I = 230 ÷ 46
- I = 5.0 A
6.A student wants to find the density of a small stone with an irregular shape. The student has a top-pan balance, a measuring cylinder, a eureka can, some water and a length of thread.
From the topic: Density
(a)Describe how the student could use this apparatus to determine the density of the stone.
6 marksShow the answerHide the answer
Answer: Measure the mass of the dry stone on the top-pan balance. Part-fill the measuring cylinder with water and read the volume at the bottom of the meniscus, with the eye level with it. Tie the thread to the stone and lower it gently until it is completely under the water. Read the new volume. The volume of the stone is the new reading minus the first reading. (If the stone does not fit, fill the eureka can to its spout and collect the water that overflows in the measuring cylinder.) Calculate density = mass ÷ volume. Repeat and find a mean. (AQA marks 6-mark questions as a whole, by level of response. The marking points below show what a top-level answer covers.)
Marking points
- Mass of the stone measured on the top-pan balance.
- Measuring cylinder part-filled with water and the starting volume read (at the bottom of the meniscus, eye level).
- Stone lowered on the thread until fully submerged, and the new volume read.
- Volume of the stone = final reading − starting reading (or the volume of water collected from a full eureka can).
- Density calculated using density = mass ÷ volume.
- Measurements repeated and a mean calculated (or units consistent, such as g and cm³ giving g/cm³).
(b)Explain why the student should lower the stone into the measuring cylinder on the thread rather than dropping it in.
2 marksShow the answerHide the answer
Answer: Dropping the stone could crack or break the measuring cylinder. It could also splash water out, so the second reading, and so the volume, would be too small.
Marking points
- The stone could crack or break the glass (a safety risk).
- Water could splash out, making the measured volume too small.
(c)Some air bubbles stay stuck to the stone under the water. Explain the effect this has on the student's value for density.
2 marksShow the answerHide the answer
Answer: The bubbles also push water aside, so the measured volume is larger than the stone's real volume. Dividing the mass by too large a volume gives a density that is too small.
Marking points
- The measured volume is too large (the bubbles displace water as well).
- So the calculated density is too small.
7.Steam at 100 °C from a kettle condenses on a person's hand. Specific latent heat of vaporisation of water = 2.26 × 10⁶ J/kg. Specific heat capacity of water = 4200 J/kg °C.
From the topic: Specific latent heat
(a)Name the change of state when steam turns into water.
1 markShow the answerHide the answer
Answer: Condensing (condensation)
Marking points
- Condensing / condensation
(b)Calculate the energy released when 2.0 g of steam at 100 °C condenses to water at 100 °C.
3 marksShow the answerHide the answer
Answer: m = 2.0 g = 0.0020 kg. E = m L = 0.0020 × 2.26 × 10⁶ = 4520 J
Marking points
- m = 0.0020 kg
- E = 0.0020 × 2.26 × 10⁶
- E = 4520 J (accept 4500 J)
(c)The water then cools from 100 °C to 35 °C on the skin. Calculate the energy released as it cools.
2 marksShow the answerHide the answer
Answer: ΔE = m c Δθ = 0.0020 × 4200 × 65 = 546 J
Marking points
- ΔE = 0.0020 × 4200 × 65
- ΔE = 546 J (accept 550 J)
(d)Use your answers to explain why a scald from steam at 100 °C is much worse than one from the same mass of water at 100 °C.
2 marksShow the answerHide the answer
Answer: Water at 100 °C only releases the 546 J as it cools. Steam releases 4520 J of latent heat as it condenses, as well as the 546 J, so it transfers over nine times as much energy to the skin.
Marking points
- Steam releases latent heat (4520 J) when it condenses, in addition to the energy released as the water cools.
- So much more energy (about nine times as much in total) is transferred to the skin.
8.A teacher shows a class the results from a computer model of the alpha particle scattering experiment. Total detected: 78 000. Deflected by less than 10°: 77 610. Deflected by 10° to 90°: 387. Deflected by more than 90°: 3.
From the topic: Development of the atomic model
(a)Calculate the percentage of the detected alpha particles that were deflected by less than 10°.
2 marksShow the answerHide the answer
Answer: 77 610 ÷ 78 000 × 100 = 99.5%
Marking points
- 77 610 ÷ 78 000 (× 100)
- 99.5%
(b)Explain why so few alpha particles were deflected by more than 90°.
2 marksShow the answerHide the answer
Answer: Each nucleus takes up only a tiny fraction of its atom. So only the rare alpha particle aimed almost directly at one gets near enough to be pushed back.
Marking points
- The nucleus is a very small part of the atom
- So only a few alpha particles are aimed close enough to a nucleus to be repelled back
(c)Use the scattering experiment to explain how scientific models can change over time.
2 marksShow the answerHide the answer
Answer: The plum pudding model could not explain why some alpha particles were deflected through large angles or bounced back. So it was replaced by the nuclear model, which did explain these results.
Marking points
- The new results (large deflections / bouncing back) could not be explained by the plum pudding model
- So it was replaced by a new model (the nuclear model) that fitted the evidence