AQA · GCSE AQA
AQA GCSE Physics June 2022 Paper 1 Foundation (8463/1F)
Set by AQA for AQA GCSE Physics, June 2022: 1 hour 45 minutes and 100 marks, on Energy, Electricity, Particle model of matter, Atomic structure, Working scientifically. The paper itself is on AQA’s website; this page adds what it covers, how to use it and original practice questions on the same topics.
Paper facts
- Series
- June 2022
- Paper
- Paper 1 Foundation
- Code
- 8463/1F
- Tier
- Foundation
- Time
- 1 hour 45 minutes
- Marks
- 100
- Calculator
- Allowed
- Syllabus
- 8463 (first teaching 2016)
- Links checked
- 17 November 2026
Official files
- Question paper(opens AQA’s website)
- Mark scheme(opens AQA’s website)
- Examiner report(opens AQA’s website)
These files belong to AQA. Labverse links to them and never hosts or copies them. Labverse is not affiliated with AQA.
What this paper covers
5 topic groups from our map of GCSE Physics — AQA. Revise each one with its topic pages and simulations before you sit the paper.
- Energy
Energy stores and systems · Kinetic and potential energy · Specific heat capacity · Power · Conservation and dissipation of energy · Efficiency · Energy resources
Energy stores and transfersEnergy skate trackSpecific heat capacityPower and efficiency
- Electricity
Circuit symbols · Electrical charge and current · Current, resistance and potential difference · I–V characteristics · LDRs and thermistors · Series and parallel circuits · Mains electricity · Electrical power · Energy transfers in appliances · The National Grid · Static electricity and electric fields
Circuit builderCharge, current, energy and powerResistance of a wireI–V characteristics
- Particle model of matter
Density · Changes of state · Internal energy · Specific latent heat · Particle motion in gases · Pressure in gases
Measuring densityParticle model and states of matterLatent heat and heating curvesGas laws and particles
- Atomic structure
Structure of the atom · Mass number and isotopes · Development of the atomic model · Radioactive decay and nuclear radiation · Nuclear equations · Half-life · Contamination and irradiation · Uses and hazards of radiation · Nuclear fission and fusion
Isotopes and atom builderAtomic models and Rutherford scatteringAlpha, beta and gamma radiationNuclear equations
- Working scientifically
Measuring instruments · Accuracy, precision and errors · Units, prefixes and significant figures
Vernier caliperMicrometer screw gaugeAccuracy, precision and errorsSignificant figures, prefixes and units trainer
How to use this paper
- 1. Time it. Set 1 hour 45 minutes for 100 marks: about 63 seconds a mark. At 53 minutes you should be roughly halfway through the marks; if you’re well behind, speed up on the short questions.
- 2. Sit it in one go. Open the question paper on AQA’s website (the link above) and work on paper, with no notes.
- 3. Mark it with the official scheme. Give a mark only when your answer matches a marking point. Be strict with yourself: it’s the gaps you find that improve your grade.
- 4. Read the examiner report. It says which questions students found hardest and what the best answers did, so compare it with your own script.
- 5. Log mistakes by topic. Keep one line per topic group (Energy, Electricity, Particle model of matter, Atomic structure, Working scientifically) and add a tally each time a mark goes there.
- 6. Revisit, then redo. Work through the weakest group’s topic pages and simulations, try the questions below, and come back to the paper in a week.
Practise the same topics
6 original exam-style questions on this paper’s topics, written in the style of GCSE AQA (not taken from the paper). Try each one before you reveal the answer.
1.A student writes a list of energy resources: coal, geothermal, natural gas, nuclear fuel, tides, wind.
From the topic: Energy resources
(a)Give two resources from the list that are non-renewable.
2 marksShow the answerHide the answer
Answer: Any two of coal, natural gas and nuclear fuel.
Marking points
- One of coal / natural gas / nuclear fuel
- A second, different one of coal / natural gas / nuclear fuel
(b)What is meant by a renewable energy resource?
1 markShow the answerHide the answer
Answer: A resource that is naturally replaced at the rate it is used, so it will not run out.
Marking points
- It is replaced (naturally) as it is used (allow: it will not run out)
(c)Most oil in the UK is used for transport. Name one renewable energy resource that could be used for transport instead of oil.
1 markShow the answerHide the answer
Answer: Biofuel, such as bioethanol or biodiesel.
Marking points
- Biofuel (allow: electricity generated from a named renewable resource, used to charge electric vehicles)
(d)Geothermal power stations are very reliable. Suggest why the UK generates very little electricity from geothermal energy.
1 markShow the answerHide the answer
Answer: Very few places in the UK have hot rocks close enough to the surface.
Marking points
- Few suitable sites / hot rocks are rarely close enough to the surface in the UK
2.The heating element of a hair dryer has a resistance of 46 Ω. It is connected to the 230 V mains supply.
From the topic: Current, resistance and potential difference
(a)Calculate the current in the heating element.
2 marksShow the answerHide the answer
Answer: I = V ÷ R = 230 ÷ 46 = 5.0 A
Marking points
- I = 230 ÷ 46
- I = 5.0 A
3.A resistor is kept at constant temperature. Its I–V graph, with current on the vertical axis, is straight and passes through the origin. One point on the line is at a potential difference of 6.0 V and a current of 0.12 A.
From the topic: I–V characteristics
(a)Calculate the gradient of the line.
2 marksShow the answerHide the answer
Answer: gradient = change in current ÷ change in p.d. = 0.12 ÷ 6.0 = 0.020 A/V
Marking points
- gradient = 0.12 ÷ 6.0
- gradient = 0.020 (A/V)
(b)Use your answer to calculate the resistance of the resistor.
2 marksShow the answerHide the answer
Answer: R = 1 ÷ gradient = 1 ÷ 0.020 = 50 Ω (as a check, 6.0 ÷ 0.12 = 50 Ω)
Marking points
- R = 1 ÷ 0.020 (or R = 6.0 ÷ 0.12)
- R = 50 Ω
(c)A second resistor has a larger resistance. State how its I–V graph would differ from the first one.
1 markShow the answerHide the answer
Answer: Its line would be less steep (a smaller gradient), but still straight and through the origin.
Marking points
- Less steep line / smaller gradient (still straight through the origin).
4.A camper takes a bottle of frozen water out of a cool box and leaves it in the sun. The ice starts at −12 °C.
From the topic: Internal energy
(a)Describe the internal energy of the ice in terms of its particles.
2 marksShow the answerHide the answer
Answer: The energy stored by the particles of the ice: the kinetic energy of their vibration plus the potential energy due to the forces between them, added up over every particle.
Marking points
- Kinetic energy and potential energy of the particles (both needed).
- Added together for all of the particles in the ice.
(b)The temperature of the ice rises from −12 °C to 0 °C. State how the average kinetic energy of its particles changes.
1 markShow the answerHide the answer
Answer: It increases.
Marking points
- Increases (the particles vibrate faster).
(c)The ice then melts. Its temperature stays at 0 °C until all of the ice has melted. Explain how the internal energy of the bottle's contents changes while the ice melts.
3 marksShow the answerHide the answer
Answer: The internal energy increases, because energy is still being transferred to the ice from the surroundings. This energy frees the particles from their fixed positions, so their potential energy increases. Their average kinetic energy does not change, so the temperature stays at 0 °C.
Marking points
- Internal energy increases (energy is still being transferred to the ice).
- The potential energy of the particles increases as the forces holding them in fixed positions are overcome.
- The particles’ average kinetic energy is unchanged, so the temperature does not change.
5.Scientists' ideas about atoms have changed over time. In the early 1900s, the plum pudding model was the accepted model of the atom.
From the topic: Development of the atomic model
(a)Describe the plum pudding model of the atom.
2 marksShow the answerHide the answer
Answer: Positive charge fills the whole atom, and negative electrons are dotted through it.
Marking points
- A ball (sphere) of positive charge filling the whole atom
- With negative electrons scattered through it (allow: embedded in it)
(b)Name the discovery that led to the plum pudding model.
1 markShow the answerHide the answer
Answer: The discovery of the electron.
Marking points
- (Discovery of) the electron
(c)Explain why this discovery showed that atoms are not the smallest particles of matter.
2 marksShow the answerHide the answer
Answer: Electrons are particles much smaller than atoms that come from inside them. So atoms must contain smaller particles and can be split into parts.
Marking points
- Electrons are (much) smaller than atoms / come from inside atoms
- So atoms have smaller parts / are not indivisible
(d)Give two differences between the plum pudding model and the nuclear model.
2 marksShow the answerHide the answer
Answer: Any two from: in the nuclear model the positive charge is concentrated in a nucleus at the centre, not spread out; nearly all the mass is in the nucleus, not spread out; most of the nuclear atom is empty space; the electrons are outside the nucleus instead of mixed through the positive charge.
Marking points
- First difference, e.g. positive charge concentrated in a central nucleus (not spread out)
- Second difference, e.g. mass concentrated in the nucleus / atom mostly empty space / electrons outside the nucleus
6.In 1909, Geiger and Marsden fired a beam of alpha particles at a very thin sheet of gold. The apparatus was inside a vacuum.
From the topic: Development of the atomic model
(a)Give the charge on an alpha particle.
1 markShow the answerHide the answer
Answer: Positive.
Marking points
- Positive (allow +2)
(b)Explain why the plum pudding model predicted that all the alpha particles would pass through the gold with very little deflection.
2 marksShow the answerHide the answer
Answer: In the plum pudding model the positive charge is spread thinly through the whole atom, so no part of it can push a passing alpha particle hard. The electrons are much too light to knock a heavy alpha particle off course.
Marking points
- Positive charge (and mass) spread out through the whole atom
- So the repulsion from any one place is weak (allow: electrons too light to deflect it much)
(c)Describe the results of the experiment and explain how they led to the nuclear model of the atom.
6 marksShow the answerHide the answer
Answer: Most alpha particles passed straight through the gold, so most of the atom is empty space. A few were deflected through large angles. Like charges repel, and alpha particles are positive, so the atom's positive charge must be packed into a small region. A very small number came back towards the source. Turning one round needs an object with far more mass than the alpha particle, so nearly all of the atom's mass sits in a tiny nucleus at the centre. The plum pudding model could not explain the large deflections, so it was replaced by the nuclear model. (Level-of-response marking: the examiner reads the whole answer and picks a level, then a mark within it. Level 3, 5–6 marks: all three results described, each linked to the correct conclusion, in a logical order. Level 2, 3–4 marks: at least two results described, with at least one correct conclusion. Level 1, 1–2 marks: one or more results described with little or no explanation. 0 marks: nothing relevant.)
Marking points
- Most alpha particles passed straight through (undeflected)
- So most of the atom is empty space
- Some alpha particles were turned through large angles
- So the positive charge is packed into a small region (alpha particles repelled, as like charges repel)
- A very small number bounced back (deflected by more than 90°)
- So nearly all the mass is in a tiny central nucleus; the plum pudding model could not explain this, so it was replaced