Skip to content

AQA · GCSE AQA

AQA GCSE Physics June 2025 Paper 1 Foundation (8463/1F)

Set by AQA for AQA GCSE Physics, June 2025: 1 hour 45 minutes and 100 marks, on Energy, Electricity, Particle model of matter, Atomic structure, Working scientifically. The paper itself is on AQA’s website; this page adds what it covers, how to use it and original practice questions on the same topics.

Paper facts

Series
June 2025
Paper
Paper 1 Foundation
Code
8463/1F
Tier
Foundation
Time
1 hour 45 minutes
Marks
100
Calculator
Allowed
Syllabus
8463 (first teaching 2016)
Links checked
17 November 2026

Official files

These files belong to AQA. Labverse links to them and never hosts or copies them. Labverse is not affiliated with AQA.

What this paper covers

5 topic groups from our map of GCSE Physics — AQA. Revise each one with its topic pages and simulations before you sit the paper.

How to use this paper

  1. 1. Time it. Set 1 hour 45 minutes for 100 marks: about 63 seconds a mark. At 53 minutes you should be roughly halfway through the marks; if you’re well behind, speed up on the short questions.
  2. 2. Sit it in one go. Find the question paper on AQA’s website (the link above opens the page that lists it) and work on paper, with no notes.
  3. 3. Mark it with the official scheme. Give a mark only when your answer matches a marking point. Be strict with yourself: it’s the gaps you find that improve your grade.
  4. 4. Read the examiner report. It says which questions students found hardest and what the best answers did, so compare it with your own script.
  5. 5. Log mistakes by topic. Keep one line per topic group (Energy, Electricity, Particle model of matter, Atomic structure, Working scientifically) and add a tally each time a mark goes there.
  6. 6. Revisit, then redo. Work through the weakest group’s topic pages and simulations, try the questions below, and come back to the paper in a week.

Practise the same topics

6 original exam-style questions on this paper’s topics, written in the style of GCSE AQA (not taken from the paper). Try each one before you reveal the answer.

  1. 1.A rectangular metal block measures 5.0 cm by 4.0 cm by 2.5 cm. Its mass is 395 g.

    From the topic: Units, prefixes and significant figures

    1. (a)Work out the volume of the block in cm³.

      1 mark
      Show the answer

      Answer: 5.0 × 4.0 × 2.5 = 50 cm³

      Marking points

      • 50 cm³
    2. (b)Convert this volume into m³.

      1 mark
      Show the answer

      Answer: Since 1 cm³ = 10⁻⁶ m³, the volume is 50 × 10⁻⁶ m³, which is 5.0 × 10⁻⁵ m³ in standard form

      Marking points

      • 5.0 × 10⁻⁵ m³ (0.000 050 m³)
    3. (c)Calculate the density of the metal block in kg/m³.

      3 marks
      Show the answer

      Answer: m = 395 g = 0.395 kg. ρ = m ÷ V = 0.395 ÷ (5.0 × 10⁻⁵) = 7900 kg/m³

      Marking points

      • Mass = 0.395 kg
      • ρ = 0.395 ÷ (5.0 × 10⁻⁵)
      • ρ = 7900 kg/m³
    4. (d)Suggest why the density should be given to 2 significant figures.

      1 mark
      Show the answer

      Answer: The lengths of the block, the least precise data, are given to only 2 significant figures.

      Marking points

      • The lengths (the least precise data) are only given to 2 significant figures
    5. (e)The largest face of the block measures 5.0 cm by 4.0 cm. Find its area in m².

      2 marks
      Show the answer

      Answer: Area = 20 cm² = 20 × 10⁻⁴ m² = 2.0 × 10⁻³ m²

      Marking points

      • Area = 20 cm²
      • 2.0 × 10⁻³ m² (0.0020 m²)
  2. 2.A student writes a list of energy resources: coal, geothermal, natural gas, nuclear fuel, tides, wind.

    From the topic: Energy resources

    1. (a)Give two resources from the list that are non-renewable.

      2 marks
      Show the answer

      Answer: Any two of coal, natural gas and nuclear fuel.

      Marking points

      • One of coal / natural gas / nuclear fuel
      • A second, different one of coal / natural gas / nuclear fuel
    2. (b)What is meant by a renewable energy resource?

      1 mark
      Show the answer

      Answer: A resource that is naturally replaced at the rate it is used, so it will not run out.

      Marking points

      • It is replaced (naturally) as it is used (allow: it will not run out)
    3. (c)Most oil in the UK is used for transport. Name one renewable energy resource that could be used for transport instead of oil.

      1 mark
      Show the answer

      Answer: Biofuel, such as bioethanol or biodiesel.

      Marking points

      • Biofuel (allow: electricity generated from a named renewable resource, used to charge electric vehicles)
    4. (d)Geothermal power stations are very reliable. Suggest why the UK generates very little electricity from geothermal energy.

      1 mark
      Show the answer

      Answer: Very few places in the UK have hot rocks close enough to the surface.

      Marking points

      • Few suitable sites / hot rocks are rarely close enough to the surface in the UK
  3. 3.A torch has a single loop containing a battery, a switch and a lamp. In 2.0 minutes, 48 C of charge flows through the lamp.

    From the topic: Electrical charge and current

    1. (a)Calculate the current in the lamp.

      3 marks
      Show the answer

      Answer: t = 120 s. I = Q ÷ t = 48 ÷ 120 = 0.40 A

      Marking points

      • Time converted: 120 s
      • I = 48 ÷ 120
      • I = 0.40 A
    2. (b)An ammeter is moved from one side of the lamp to the other. State the new reading and explain your answer.

      2 marks
      Show the answer

      Answer: 0.40 A. The circuit is a single closed loop, so the current is the same at every point; charge is not used up by the lamp.

      Marking points

      • Reading stays at 0.40 A.
      • Current is the same at all points in a single closed loop (charge is not used up).
  4. 4.A kitchen has an electric kettle with a power rating of 3.0 kW and a food mixer with a power rating of 0.40 kW. Both are plugged into the mains.

    From the topic: Energy transfers in appliances

    1. (a)Calculate the energy transferred by the kettle in 2.0 minutes.

      2 marks
      Show the answer

      Answer: P = 3000 W and t = 120 s. E = Pt = 3000 × 120 = 360 000 J

      Marking points

      • E = 3000 × 120
      • E = 360 000 J
    2. (b)Describe and compare the energy transfers in the kettle and in the food mixer when each is used for 2.0 minutes. Refer to energy stores and to the power ratings in your answer.

      6 marks
      Show the answer

      Answer: In both appliances, energy is transferred electrically from the mains, because the current does work. In the kettle, the current heats the element, so the thermal store of the element increases and energy then passes by heating to the thermal store of the water. In the mixer, the motor turns the blades, so the energy goes mainly to the kinetic store of the motor and the blades. Neither transfer is perfect: the kettle also warms its own body and the air, and the mixer's motor heats up and makes sound, so some energy is dissipated to the surroundings. In 2.0 minutes the kettle transfers 360 000 J but the mixer only 400 × 120 = 48 000 J. The kettle's power rating is 7.5 times bigger, so in the same time it transfers 7.5 times as much energy. (This part is marked by levels of response: the examiner judges your answer overall and decides which level it fits, instead of giving one mark per point. A clear, linked answer that covers both appliances, their stores, the wasted energy and the effect of the power ratings, like this one, reaches the top level.)

      Marking points

      • Energy is transferred electrically from the mains (the current does work) in both appliances.
      • Kettle: the thermal store of the heating element increases, then the thermal store of the water.
      • Mixer: energy goes mainly to the kinetic store of the motor and blades.
      • Some energy is dissipated in both, e.g. heating the surroundings, or sound from the mixer.
      • In 2.0 minutes the mixer transfers 48 000 J, compared with 360 000 J for the kettle.
      • The kettle transfers more energy in the same time because its power rating is higher (7.5 times higher).
  5. 5.A student lets 0.025 kg of melted stearic acid cool in a boiling tube and records its temperature every 30 s. The temperature falls from 80 °C to 69 °C, stays at 69 °C for 6.0 minutes, then falls again. Specific latent heat of fusion of stearic acid = 2.0 × 10⁵ J/kg.

    From the topic: Specific latent heat

    1. (a)State the freezing point of the stearic acid.

      1 mark
      Show the answer

      Answer: 69 °C

      Marking points

      • 69 °C
    2. (b)Explain why the temperature stays at 69 °C for 6.0 minutes, even though the tube is still losing energy to the surroundings.

      2 marks
      Show the answer

      Answer: The stearic acid is freezing, and freezing releases energy (latent heat). This energy replaces the energy lost to the surroundings, so the temperature stays constant until all of the liquid has become solid.

      Marking points

      • The stearic acid is changing state (freezing), which releases energy / latent heat.
      • The energy released balances the energy lost to the surroundings, so the temperature does not fall.
    3. (c)Calculate the energy released while the stearic acid freezes.

      2 marks
      Show the answer

      Answer: E = m L = 0.025 × 2.0 × 10⁵ = 5000 J

      Marking points

      • E = 0.025 × 2.0 × 10⁵
      • E = 5000 J
    4. (d)Calculate the average rate at which the tube loses energy to the surroundings while the temperature stays at 69 °C.

      3 marks
      Show the answer

      Answer: t = 6.0 × 60 = 360 s. P = E ÷ t = 5000 ÷ 360 = 13.9 W (about 14 W)

      Marking points

      • t = 360 s
      • P = 5000 ÷ 360 (allow their energy)
      • P = 13.9 W (accept 14 W)
  6. 6.A student shines ultraviolet radiation on a sample of gas in a sealed tube. Electrons in the gas atoms absorb some of the radiation. Shortly afterwards, the gas glows with visible light.

    From the topic: Structure of the atom

    1. (a)Describe what happens to an electron when it absorbs the ultraviolet radiation.

      2 marks
      Show the answer

      Answer: It moves to a higher energy level, further away from the nucleus.

      Marking points

      • Moves to a higher energy level
      • Further from the nucleus
    2. (b)Explain how the gas then gives out visible light.

      2 marks
      Show the answer

      Answer: The electrons fall back to lower energy levels, closer to the nucleus. As each one does so, it emits electromagnetic radiation, here visible light.

      Marking points

      • Electrons move (back) to a lower energy level / closer to the nucleus
      • Electromagnetic radiation (light) is emitted as they do so
    3. (c)One electron absorbs so much energy that it leaves its atom completely. Name the particle that is left behind and state its charge.

      2 marks
      Show the answer

      Answer: An ion, with a positive charge (1+), because the atom now has one more proton than electrons.

      Marking points

      • Ion
      • Positive (charge of 1+ / +1)